Seconique Furniture TORTILLA User manual

DO NOT
USE
!
PAGE 1
54271-DS
ASSEMBLY INSTRUCTIONS
IMPORTANT
PLEASE READ BEFORE YOU CONTINUE FURTHER
After unpacking this product please keep the original packaging in case it needs to be
returned for any reason.
• Please ensure all fittings and parts are present before commencing with assembly.
• We recommend that you lay a blanket or sheet on the floor to avoid damage to both your
floor and the product.
• We strongly recommend that you keep children away from your work area.
• Assemble this product as close to its final position as possible.
• Never drag or push products as this could cause damage to the joints making it inferior.
• Do not place this product next to a radiator or in direct sunlight.
• Wood is a natural product and may expand if subjected to damp and may shrink or crack
if subjected to heat. Therefore it is recommended that room temperature is maintained,
with no sudden temperature fluctuations.
• Make sure any spillage is wiped o ffimmediately.
• Do not place hot or chilled items directly on to the surface, use a place mat or marking
will occur.
• For general cleaning use a duster, and do not use detergents of any kind. However, the
surface will need to be retreated from time to time. This can be done by using block wax
(unperfumed) and rubbing it over the whole item.
• From time to time it may be necessary to tighten fittings, regular inspections should be
carried out.
CARE AND MAINTENANCE
TORTILLA LAMP TABLE
FOR DOMESTIC USE ONLY
SEC/SH/09/20/DS1

to help identify them during assembly.
Please Note:
The below parts have been number/colour coded
to help identify them during assembly.
GLUE
Ø4,0 x 40CP
1/+
Wooden Cap
Table Leg (yellow marking)Table Leg (yellow marking)
Part Code
Part Number Part Description Quantity Carton
1
2
3
4
S300-302-021-DS1-01 Table Top 11/1
Frame Side
Table Leg (yellow marking)
S300-302-021-DS1-02
S300-302-021-DS1-03
4
2
2
1/1
1/1
1/1
S300-302-021-DS1-04
TOOLS REQUIRED
A08 D
E
01
08
B08
HARDWARE LIST
PAGE 2
PARTS LIST
C01
1/+
Ø7,0x90
Table Leg (blue marking)
SEC/SH/09/20/DS1
1
2
2
3
3
4
4
2
2

B
C
Detail 2
D
GLUE
Detail 1
D01
GLUE
2 - x1
FRAME SIDE
3 -
x1
TABLE LEG (YELLOW MARKING)
4 -
x1
TABLE LEG (BLUE MARKING)
D01
GLUE
C01
TOOLS REQUIRED
Ø7,0x90
B02
B
C
Detail 2
D
GLUE
Detail 1
HARDWARE REQUIRED
PARTS REQUIRED
STEP 2
C01
HARDWARE REQUIRED
2 - x1
FRAME SIDE
3 -
x1
TABLE LEG (YELLOW MARKING)
STEP 1
PARTS REQUIRED
PAGE 3
4 -
x1
TABLE LEG (BLUE MARKING)
TOOLS REQUIRED
Ø7,0x90
B02
Detail 2
Detail 1
(Yellow Marking)
(Blue Marking)
Detail 2
Detail 1
(Blue Marking)
(Yellow Marking)
SEC/SH/09/20/DS1
4
3
2
3
4

2 - x2
FRAME SIDE
PARTS REQUIRED
D01
GLUE
C01
HARDWARE REQUIRED
TOOLS REQUIRED
Ø7,0x90
B04
B
C
Detail 2
D
GLUE
Detail 1
1 - x1
TABLE TOP
PARTS REQUIRED
HARDWARE REQUIRED
A08
Ø4,0 x 40CP
TOOLS REQUIRED
E08
Wooden Cap
STEP 4
STEP 3
PAGE 4
A
Detail 3
E
Detail 4
Detail 1
Detail 2
CENTRALIZE
00000DS
Detail 3
Detail 4
SEC/SH/09/20/DS1
2
2
1