Seconique BROOKLYN User manual

BROOKLYN
DO NOT
USE
DRESSING TABLE WITH STOOL
ASSEMBLY INSTRUCTIONS
SEC/SH/08/23/EU1
Page 01
IMPORTANT
FOR DOMESTIC USE ONLY
PLEASE READ BEFORE YOU CONTINUE FURTHER
THE PRODUCT YOU HAVE PURCHASED WILL GIVE YOU MANY
YEARS OF SERVICE IF YOU FOLLOW THE GUIDELINES FOR ITS
SAFE ASSEMBLY AND PERIODIC MAINTENANCE AND CLEANING.
ASSEMBLE ON A SOFT CLEAN SURFACE.
DO NOT USE ANY TOOLS OTHER THAN THOSE SHOWN.
ANY SPANNERS OR ALLEN KEYS REQUIRED ARE INCLUDED WITH
THE FITTINGS KIT.
DO NOT FOR ANY REASON USE A POWER TOOL TO ASSEMBLE
THIS PRODUCT. ITS USE WILL INVALIDATE ANY CLAIM YOU MAY
HAVE AND COULD MAKE THIS PRODUCT UNSAFE.
DEPENDING ON THE AMOUNT OF USE THIS PRODUCT RECEIVES
IT MAY BE NECESSARY TO TIGHTEN UP THE FIXINGS FROM TIME
TO TIME. THIS IS COMPLETELY NORMAL FOR ANY FLAT PACK
FURNITURE. DO NOT OVERTIGHTEN FIXING.
FOR CLEANING, YOU MAY USE A DAMP CLOTH (NOT WET) DO NOT
USE POLISH, DETERGENT OR CHEMICAL CLEANERS.
THE SURFACE OF THIS ITEM IS NOT HEAT RESISTANT. ALWAYS
USE A PLACE MAT UNDER HOT OR COLD ITEMS TO PREVENT
MARKING.

PART LIST
Page 02
Part Number Part Code Part Description Quantity Carton
1S100-105-023-EU1-01 11/1
2
Centre Panel
3
Side Panel - Right
4Side Panel - Left 1
51
6
7
8Bottom Panel 1
9
10
11
12
13
14
2
Large Drawer Back
Drawer Side - Left
Drawer Side - Right
Large Drawer Front
Large Drawer Base
Drawer Bottom Support Rail
S100-105-023-EU1-02
S100-105-023-EU1-03
S100-105-023-EU1-04
S100-105-023-EU1-05
S100-105-023-EU1-06
S100-105-023-EU1-07
S100-105-023-EU1-08
S100-105-023-EU1-09
S100-105-023-EU1-10
S100-105-023-EU1-11
S100-105-023-EU1-12
S100-105-023-EU1-13
S100-105-023-EU1-14
Small Crossbar
Top Panel
Large Crossbar
2
1
1
1
1
1
1
1
1
15
16
17
18 1
S100-105-023-EU1-15
S100-105-023-EU1-16
S100-105-023-EU1-17
S100-105-023-EU1-18
1
1
1
Back Panel - Right
1
5
3
6
2
4
7
8
9
10
11
11
12
12
13
14
15 16
17
18
19
20
1
19
20 1
Shelf Panel
S100-105-023-EU1-19
S100-105-023-EU1-20
Back Panel - Left
Small Drawer Back
Small Drawer Front
Small Drawer Base
Door Panel
2
21
22 2
S100-105-023-EU1-21
S100-105-023-EU1-22
1
23
24 1
Top Panel - Stool
S100-105-023-EU1-23
S100-105-023-EU1-24
Side Panel - Stool
Upper Support - Stool
Lower Support - Stool
21
21
22
22
23
24
1/1
1/1
1/1
1/1
1/1
1/1
1/1
1/1
1/1
1/1
1/1
1/1
1/1
1/1
1/1
1/1
1/1
1/1
1/1
1/1
1/1
1/1
1/1
SEC/SH/08/23/EU1

HARDWARE LIST
(SCREWDRIVER NOT PROVIDED)
USE A FLAT HEAD SCREWDRIVER TO TIGHTEN THE CAM NUTS. A QUARTER TURN CLOCKWISE IS ALL THAT IS NEEDED.
STEP 1 - PUSH CAM BOLT INTO INSERT
STEP 2 - ALIGN THE CAM BOLT WITH THE HOLE AND PUSH TOGETHER UNTIL FLUSH. ( MAKE SURE THE ARROW OF
THE CAM LOCK IS POINTING TOWARD ON THE EDGE OF THE PANEL.)
STEP 3 - THE HEAD OF THE BOLT GOES INTO THE WIDE MOUTH OF THE CAM LOCK. YOU THEN TURN THE LOCK SO
THE NARROW PART CLOSES OVER THE BOLT.
Page 03
A
B
C
D
E
F
G
H
I
DOWEL 6 X 30MM 42 PCS DRAWER RUNNER A - L/R
4 PCS
3 PCS
SCREW M4 X 50MM
25 PCS
CAM BOLT + CAM NUT
HANDLE
4 PCS
19 SETS
SCREW M3.5 X 16MM 23 PCS
TACK 20 PCS
J
K
L
M
N
DRAWER RUNNER B - L/R
SCREW M3.5 X 12MM
HANDLE SCREW 19MM
2 PCS
16 PCS
4 PCS
ANTI - TIP STRAP
SCREW M4 X 30MM
3 PCS
SCREW M4 X 16MM
O
P
Q
R
S
W
4 PCSTAPPING SCREW M8 X 12MM
4 PCS
1 PC
6 PCS
4 PCS
SHELF SUPPORT
PVC STOPPER
2 PCS
HINGES 7/8
SCREW M6 X 50MM
1 PCS
WOOD FOOT
ALLEN KEY 2 PCS
2 PCS
TBOLT M6 X 50MM 10 PCS
PLASTIC FOOT
2 PCS
V
USCREW M4 X 38MM 4 PCS
X
WASHER 3 PCS
SEC/SH/08/23/EU1

STEP 1
PARTS REQUIRED
1 - CENTRE PANEL x1
HARDWARE REQUIRED
STEP 2
Page 04
DM
L
FRONTBACK
UP FIRST HOLE
LAST FIRST HOLE
THIRD HOLE
S
O
S
O
B
A
A04
S04
TOOLS REQUIRED
O01
B01
1
B
FRONT BACK
UP SECOND HOLE
LAST THIRD HOLE
FIRST HOLE
B
PARTS REQUIRED
1 - CENTRE PANEL x1
HARDWARE REQUIRED
01
S04
TOOLS REQUIRED
O01
B02
L02
D01
M01
B
A
A
A
L
B
180o
Flip
SEC/SH/08/23/EU1

PARTS REQUIRED
STEP 3
STEP 4
Page 05
6 - SIDE PANEL - RIGHT x1
HARDWARE REQUIRED
PARTS REQUIRED
A04
S04
TOOLS REQUIRED
O01
B02
B
FRONT BACK
UP SECOND HOLE
LAST THIRD HOLE
FIRST HOLE
L02
01
B
FRONTBACK
UP SECOND HOLE
LAST THIRD HOLE
FIRST HOLE
S
O
S
O
A
L
6
B
4 - SIDE PANEL - LEFT x1
HARDWARE REQUIRED
A02
S04
TOOLS REQUIRED
O01
B02
01
B
B
A
B
4
A
A
A
L
A
B
B
SEC/SH/08/23/EU1

STEP 5
PARTS REQUIRED
7 - TOP PANEL x1
STEP 6
Page 06
PARTS REQUIRED
5 - SMALL CROSSBAR
x1
HARDWARE REQUIRED
A08
TOOLS REQUIRED
B04
HARDWARE REQUIRED
TOOLS REQUIRED
B06
B
x1
3 - LARGE CROSSBAR
x1
2 - BACK PANEL - LEFT
5
3
2
A
A
B
7
B
B
B
B
B
B
B
A
A
A
A
A
SEC/SH/08/23/EU1

PARTS REQUIRED
x1
STEP 7
PARTS REQUIRED
STEP 8
Page 07
HARDWARE REQUIRED
x1
x1
1 - CENTRE PANEL
2
1
3
4
4 - SIDE PANEL - LEFT
x1
3 - LARGE CROSSBAR
HARDWARE REQUIRED
TOOLS REQUIRED
T02
2 - BACK PANEL - LEFT
TOOLS REQUIRED
T02
T
T
T
T
SEC/SH/08/23/EU1

PARTS REQUIRED
STEP 9
PARTS REQUIRED
STEP 10
HARDWARE REQUIRED
x1
x1
7 - TOP PANEL x1
Page 08
TOOLS REQUIRED
HARDWARE REQUIRED
TOOLS REQUIRED
7
5 - SMALL CROSSBAR
6 - SIDE PANEL - RIGHT
5
6
SEC/SH/08/23/EU1

PARTS REQUIRED
STEP 11
STEP 12
Page 09
PARTS REQUIRED
F
I
HARDWARE REQUIRED
HARDWARE REQUIRED
TOOLS REQUIRED
TOOLS REQUIRED
C04
F16
I04
8 - BOTTOM PANEL x1
D02
02
K
D
K
C
8
F
F
C
I
I
I
C
C
DK
F
SEC/SH/08/23/EU1

STEP 13
HARDWARE REQUIRED
STEP 14
Page 10
TOOLS REQUIRED
B
PARTS REQUIRED
HARDWARE REQUIRED
A04
TOOLS REQUIRED
10 - LARGE DRAWER BACK x1
11 - DRAWER SIDE-LEFT x1
13 - LARGE DRAWER FRONT x1
12 - DRAWER SIDE-RIGHT
U02
B03
B02
E20
x1
PARTS REQUIRED
9 - BACK PANEL - RIGHT x1 E
9
13
B
10
11
12 A
UB
B
B
A
A
A
U
SEC/SH/08/23/EU1

PARTS REQUIRED
HARDWARE REQUIRED
STEP 16
Page 11
TOOLS REQUIRED
D06
P02
15 -DRAWER BOTTOM SUPPORT RAIL x1
Q02
BR
G
Q
S
B01
PARTS REQUIRED
14 - LARGE DRAWER BASE x1
HARDWARE REQUIRED
01
TOOLS REQUIRED
01
R
G
06
S
STEP 15
B
D
P
14
15
13
D
D
Q
D
D
D
S
S
V
01
V
SEC/SH/08/23/EU1

STEP 18
Page 12
STEP 17
PARTS REQUIRED
HARDWARE REQUIRED
A04
TOOLS REQUIRED
16 - SMALL DRAWER BACK x1
11 - DRAWER SIDE-LEFT x1
17 - SMALL DRAWER FRONT x1
12 - DRAWER SIDE-RIGHT
U02
B02
B02
x1
PARTS REQUIRED
18 - SMALL DRAWER BASE x1
HARDWARE REQUIRED
01
TOOLS REQUIRED
01
R
G
03
S
16 11
12
17
A
B
U
B
R
G
B
S
18
17
S
S
B
A
A
U
B
A
V
01
V
SEC/SH/08/23/EU1

STEP 19
STEP 20
Page 13
PARTS REQUIRED
HARDWARE REQUIRED
TOOLS REQUIRED
PARTS REQUIRED
HARDWARE REQUIRED
TOOLS REQUIRED
D06
P02
D
P
D
D
D
D
D
SEC/SH/08/23/EU1

H
N
N
H
G
R
20
PARTS REQUIRED
STEP 22
Page 14
STEP 21
PARTS REQUIRED
19
20
3. FRONT-TO-BACK BY THE SLACKING THE
HINGE ARM MOUNTING SCREW
YOU SHOULD RE-ADJUST SCREWS AS SHOWN TO ALIGN DOOR ONCE HINGES HAVE BEEN ATTACHED.
1. VERTICAL ADJUSTMENT VIA
SLOT IN THE MOUNTING PLATE
2. LATERAL ADJUSTMENT BY
SCREW ADJUSTING
19 - DOOR PANEL x1
19 - DOOR PANEL x1
20 - SHELF PANEL x1
HARDWARE REQUIRED
D04
TOOLS REQUIRED
N02
19
HARDWARE REQUIRED
H04
TOOLS REQUIRED
R01
G01
N
D
N
DD
01
V
V
SEC/SH/08/23/EU1

PART REQUIRED
X
02
HARDWARE REQUIRED
W
02
TOOLS REQUIRED
WARNING
Wall fixings are not supplied with this product as different wall
materials require different types of fixing devices.Please make
sure you use fixings suitable for the walls in your home.
Serious or fatal injuries can occur from furniture tipping
over. To prevent the furniture from tipping over we
recommend that it is permanently fixed to the wall.
W
X
TOP
TOP
WALL
W
WALL
TOP
STEP 23
Page 15
SEC/SH/08/23/EU1

STEP 24
STEP 25
Page 16
PARTS REQUIRED
x2
HARDWARE REQUIRED
A16
PARTS REQUIRED
21 - SIDE PANEL - STOOL x1
HARDWARE REQUIRED
T03
x1
22 - UPPER SUPPORT - STOOL x2
23 - LOWER SUPPORT - STOOL x1
24 - TOP PANEL - STOOL x1
TOOLS REQUIRED
TOOLS REQUIRED
T
22
22
23
21
24
22 23
A
B
B
x2
B04
22 - UPPER SUPPORT - STOOL
23 - LOWER SUPPORT - STOOL
SEC/SH/08/23/EU1

PARTS REQUIRED
PARTS REQUIRED
24 - TOP PANEL - STOOL x1
TOOLS REQUIRED
STEP 26
Page 17
T
24
21
21 - SIDE PANEL - STOOL x1
HARDWARE REQUIRED
T03
TOOLS REQUIRED
HARDWARE REQUIRED
B
STEP 27
SEC/SH/08/23/EU1

PARTS REQUIRED
PARTS REQUIRED
24 - TOP PANEL - STOOL x1
TOOLS REQUIRED
STEP 26
Page 17
T
24
21
21 - SIDE PANEL - STOOL x1
HARDWARE REQUIRED
T03
TOOLS REQUIRED
HARDWARE REQUIRED
B
STEP 27
SEC/SH/08/23/EU1

BROOKLYN
DRESSING TABLE MIRROR
ASSEMBLY INSTRUCTIONS
SEC/SH/08/23/EU1
Page 01
IMPORTANT
FOR DOMESTIC USE ONLY
PLEASE READ BEFORE YOU CONTINUE FURTHER
THE PRODUCT YOU HAVE PURCHASED WILL GIVE YOU MANY
YEARS OF SERVICE IF YOU FOLLOW THE GUIDELINES FOR ITS
SAFE ASSEMBLY AND PERIODIC MAINTENANCE AND CLEANING.
ASSEMBLE ON A SOFT CLEAN SURFACE.
DO NOT USE ANY TOOLS OTHER THAN THOSE SHOWN.
ANY SPANNERS OR ALLEN KEYS REQUIRED ARE INCLUDED WITH
THE FITTINGS KIT.
DO NOT FOR ANY REASON USE A POWER TOOL TO ASSEMBLE
THIS PRODUCT. ITS USE WILL INVALIDATE ANY CLAIM YOU MAY
HAVE AND COULD MAKE THIS PRODUCT UNSAFE.
DEPENDING ON THE AMOUNT OF USE THIS PRODUCT RECEIVES
IT MAY BE NECESSARY TO TIGHTEN UP THE FIXINGS FROM TIME
TO TIME. THIS IS COMPLETELY NORMAL FOR ANY FLAT PACK
FURNITURE. DO NOT OVERTIGHTEN FIXING.
FOR CLEANING, YOU MAY USE A DAMP CLOTH (NOT WET) DO NOT
USE POLISH, DETERGENT OR CHEMICAL CLEANERS.
THE SURFACE OF THIS ITEM IS NOT HEAT RESISTANT. ALWAYS
USE A PLACE MAT UNDER HOT OR COLD ITEMS TO PREVENT
MARKING.
DO NOT
USE

PART LIST
Page 02
2
3Mirror Panel
Side Panel 2
1
Part Number Part Code Part Description Quantity Carton
1S100-105-023-EU1-01M Bottom Panel 11/1
1/1
1/1
1
S100-105-023-EU1-02M
S100-105-023-EU1-03M
3
2
2
SEC/SH/08/23/EU1