Seconique Logan User manual

LOGAN NEST OF TABLES
ASSEMBLY INSTRUCTIONS
IMPORTANT
PLEASE READ BEFORE YOU CONTINUE FURTHER
FOR DOMESTIC USE ONLY
PAGE 1 OF 2
DO NOT
USE
SEC/SH/08/18/PU1
THE PRODUCT YOU HAVE PURCHASED WILL GIVE YOU MANY YEARS OF SERVICE IF YOU FOLLOW THE
GUIDELINES FOR ITSSAFE ASSEMBLY AND PERIODIC MAINTENANCE AND CLEANING.
ASSEMBLE ON A SOFT CLEAN SURFACE.
DO NOT USE ANY TOOLS OTHER THAN THOSE SHOWN.
ANY SPANNERS OR ALLEN KEYS REQUIRED ARE INCLUDED WITH THE FITTINGS KIT.
DO NOT FOR ANY REASON USE A POWER TOOL TO ASSEMBLE THIS PRODUCT. ITS USE WILL
INVALIDATE ANY CLAIM YOU MAY HAVE AND COULD MAKE THIS PRODUCT UNSAFE.
DEPENDING ON THE AMOUNT OF USE THIS PRODUCT RECEIVES IT MAY BE NECESSARY TO TIGHTEN
UP THE FIXINGS FROM TIME TO TIME. THIS IS COMPLETELY NORMAL FOR ANY FLAT PACK FURNITURE.
DO NOT OVERTIGHTEN FIXINGS.
FOR CLEANING, YOU MAY USE A DAMP CLOTH (NOT WET). DO NOT USE POLISH, DETERGENT
OR CHEMICAL CLEANERS.
THE SURFACE OF THIS ITEM IS NOT HEAT RESISTANT. ALWAYS USE A PLACE MAT UNDER HOT OR
MARKING.
COLD ITEMS TO PREVENT

LOGAN NEST OF TABLES
ASSEMBLY INSTRUCTIONS
PAGE 2 OF 2
PLEASE CHECK THAT YOU HAVE ALL THE PARTS LISTED BEFORE YOU START
ASSEMBLING. IF YOU DO FIND THAT SOMETHING IS MISSING, DO NOT
CONTINUE ASSEMBLY. PLEASE CONTACT YOUR SUPPLIER IMMEDIATELY.
PARTS LIST HARDWARE LIST
THE USE OF POWER TOOLS TO ASSEMBLE THIS PRODUCT WILL INVALIDATE ANY CLAIM AND MAY
DAMAGE THIS PRODUCT MAKING IT UNSAFE.
SEC/SH/08/18/PU1
1
2
2
2
2
2
4
6
3
5
Place the table top-L(1) upside down on a clean, soft surface then attach the table legs- L(2) using
JCBC Screw (A), Spring Washer (B) and Washer (C), then turn the table back onto its legs.
You will need to use the Allen Key(D) as provided for this step of the assembly.
No. Description Qty
1
2
3
4
5
6
1
4
1
4
1
4
Table Top(S)
Table Top(M)
Table Top(L)
Table Leg(S)
Table Leg(M)
Table Leg(L)
No. Description Qty
A
B
C
D
12
12
12
1
JCBC Screw
Washer
Spring Washer
Allen Key
Then, repeat the same step as above to assemble the rest of the tables.
1
B
C
A
D