feather&black Noah High Sleeper User manual

Noah H igh Sl eep er
IMPORTANT READ CAREFULLY – RETAIN FOR FUTURE REFERENCE
Thank you for buying the Noah H igh Sl eep er
•Please take a few quite minutes to read these instructions
•It is recommended that this product is assembled by two adults.
•This product contains small parts, keep small children clear of the assembly area
•Lay out the parts on a clean, flat surface and compare with the parts checklist. Save all packaging until
assembly is complete to avoid accidentally discarding fittings
PRODUCT SAFETY
•Recommended Mattress Size: 190cm x 90cm. The thickness should not exceed the line marked on the
upper end when assembled as a bunk
•Do not allow children to jump on the bunks. Using this furniture other than for its intended purpose
could cause damage to the structure or serious injury to your child
•Be aware of the danger of young children (under 6) falling from the upper bunk
•All assembly fastenings should always be tightened properly and care should be taken that no fittings
are loose
•Before each usage or assembly, inspect bunk bed for damaged hardware, loose joints, missing parts or
sharp edges. Do not use bunk bed if any parts are missing or broken
•Always use the ladder for entering and leaving the upper bunk
•Never attach or hang items to any part of the bunk bed that are not designed for use with the bed
•This product has passed EN 747-1:2007
PRODUCT CARE
•Wipe clean using a soft damp cloth followed by dry cloth
Do not use abrasives or cleaning products which may contain ammonia or solvents
•Take Care when handling or moving the furniture. Careless handling can damage furniture, try to lift
rather than drag
TOOLS REQUIRED
•Please use Philips Head Screwdriver (not included) and Allen key part F, J (included) to assemble the
Noah High Sleeper

1885x922x18mm
Overall measurement
Individual slat measurement
19PC
922x50x18mm