Seconique CHARLES COMPUTER DESK User manual

ASSEMBLY INSTRUCTIONS
PAGE 1 OF 9
CHARLES COMPUTER DESK
SEC/SH/11/16/EU1
IMPORTANT
PLEASE READ BEFORE YOU CONTINUE FURTHER
THE PRODUCT YOU HAVE PURCHASED WILL GIVE YOU MANY
YEARS OF SERVICE IF YOU FOLLOW THE GUIDELINES FOR ITS
SAFE ASSEMBLY AND PERIODIC MAINTENANCE AND CLEANING.
ASSEMBLE ON A SOFT CLEAN SURFACE.
DO NOT USE ANY TOOLS OTHER THAN THOSE SHOWN.
ANY SPANNERS OR ALLEN KEYS REQUIRED ARE INCLUDED WITH
THE FITTINGS KIT.
DO NOT FOR ANY REASON USE A POWER TOOL TO ASSEMBLE
THIS PRODUCT.ITS USE WILL INVALIDATE ANY CLAIM YOU MAY
HAVE AND COULD MAKE THIS PRODUCT UNSAFE.
DEPENDING ON THE AMOUNT OF USE THIS PRODUCT RECEIVES
IT MAY BE NECESSARY TO TIGHTEN UP THE FIXINGS FROM TIME
TO TIME.THIS IS COMPLETELY NORMAL FOR ANY FLAT PACK
FURNITURE.DO NOT OVERTIGHTEN FIXING.
FOR CLEANING,YOU MAY USE A DAMP CLOTH (NOT WET) DO NOT
USE POLISH,DETERGENT OR CHEMICAL CLEANERS.
THE SURFACE OF THIS ITEM IS NOT HEAT RESISTANT.ALWAYS
USE A PLACE MAT UNDER HOT OR COLD ITEMS TO PREVENT
MARKING.
FOR DOMESTIC USE ONLY

PT
PU
CAUTION : THE USE OF POWER TOOLS TO ASSEMBLE THIS PRODUCT WILL INVALIDATE.
ANY CLAIM AND MAY DAMAGE THIS PRODUCT MAKING IT UNSAFE.
PAGE 2 OF 9
SEC/SH/11/16/EU1
( SCREWDRIVER NOT PROVIDED )
USE A FLAT HEAD SCREWDRIVER TO TIGHTEN THE CAM NUTS. A QUARTER TURN CLOCKWISE IS ALL THAT IS NEEDED.
STEP 1 - PUSH CAM BOLT INTO INSERT
STEP 2 - ALIGN THE CAM BOLT WITH THE HOLE AND PUSH TOGETHER UNTIL FLUSH. ( MAKE SURE THE ARROW OF
CAM LOCK IS POINTING TOWARD THE HOLE ON EDGE OF PANEL. )
STEP 3 - THE HEAD OF THE BOLT GOES INTO THE WIDE MOUTH OF THE CAM LOCK.YOU THEN TURN THE LOCK SO
THE NARROW PART CLOSES OVER THE BOLT.

CAUTION : THE USE OF POWER TOOLS TO ASSEMBLE THIS PRODUCT WILL INVALIDATE.
ANY CLAIM AND MAY DAMAGE THIS PRODUCT MAKING IT UNSAFE.
PAGE 3 OF 9
SEC/SH/11/16/EU1
PLEASE CHECK THAT YOU HAVE ALL THE PARTS LISTED BEFORE YOU START
ASSEMBLING.IF YOU DO FIND THAT SOMETHING IS MISSING,DO NOT CONTINUE
ASSEMBLY,PLEASE CONTACT YOUR SUPPLIER IMMEDIATELY.
PARTS LIST PARTS LIST
1
2
3
4
5
6
7
8
9
10
11
LEFT SIDE PANEL
INNER TOP PANEL
BASE PANEL
CENTRE PANEL
SUPPORT PANEL
CENTRE SUPPORT CROSSBARS
LEFT BACK PANEL
TOP PANEL
1 PC
1 PC
1 PC
2 PCS
1 PC
1 PC
2 PCS
1 PC
1 PC
1 PC
1 PC
LOWER BASE CROSSBARS
TOP FRONT CROSSBAR
RIGHT SIDE PANEL
12
13
DRAWER BACK
DRAWER SIDE - LEFT
1 PC
1 PC
14 DRAWER SIDE - RIGHT 1 PC
15 DRAWER FRONT 1 PC
16 DRAWER BASE 1 PC
1
2
5
3
6
8
11
10
4
4
16
13 12
14
15
7
7
9

CAUTION : THE USE OF POWER TOOLS TO ASSEMBLE THIS PRODUCT WILL INVALIDATE.
ANY CLAIM AND MAY DAMAGE THIS PRODUCT MAKING IT UNSAFE.
PAGE 4 OF 9
SEC/SH/11/16/EU1
HARDWARE LIST
A
B
C
D
E
F
G
H
I
J
K
L
M
DOWEL 6 X 30MM
SCREW M4 X 30MM
EDGE PROTECTOR
ALLEN KEY
DRAWER RUNNER A
DRAWER RUNNER B
HANDLE SCREW M4 X 30MM
SCREW M3.5 X 16MM
36 PCS
8 PCS
4 PCS
12 PCS
1 PC
2 PCS
20 PCS
CAM BOLT + CAM NUT
3 SETS
2 SETS
2 PCS
TACK
2 PCS
1 PC
BOLT M6 X 50MM 14 PCS
HANDLE
SCREW M4 X 38MM
NANTI - TIP STRAP 2 PCS
O SCREW M4 X 16MM 2 PCS

PV
PW
CAUTION : THE USE OF POWER TOOLS TO ASSEMBLE THIS PRODUCT WILL INVALIDATE.
ANY CLAIM AND MAY DAMAGE THIS PRODUCT MAKING IT UNSAFE.
PAGE 5 OF 9
SEC/SH/11/16/EU1
STEP 1
STEP 2
YOU WILL NEED:-
YOU WILL NEED:-
K
L
4 PCS
1 PC
K
L
4 PCS
1 PC
SCREW MUST BE INSERTED
IN THE FIRST
HOLE ON THE DRAWER
RUNNER.
SCREW MUST BE INSERTED
IN THE FIRST
HOLE ON THE DRAWER
RUNNER.
UP SECOND HOLE UP SECOND HOLE
FRONT BACK FRONT BACK
FIRST HOLE FIRST HOLE
LAST THIRD HOLE LAST THIRD HOLE
K
L
K
L
1
5

LJ ( 0.25 )
MN ( 0.25 )
NJ ( 0.09 )
PC ( 0.045 )
LJ
MN
MP
NJ
NK
NM PC
CAUTION : THE USE OF POWER TOOLS TO ASSEMBLE THIS PRODUCT WILL INVALIDATE.
ANY CLAIM AND MAY DAMAGE THIS PRODUCT MAKING IT UNSAFE.
PAGE 6 OF 9
SEC/SH/11/16/EU1
STEP 3 STEP 4.1
STEP 4.2
YOU WILL NEED:- YOU WILL NEED:-
A32 PCS B10 PCS
GK
G1 PC
A
G
B
SCREW MUST BE INSERTED IN THE FIRST
HOLE ON THE DRAWER RUNNER.
C
H
A
A
B
1
2
5
3
4
4
1
2
5
3
4
4
7
6
5
2
6
7
2
3
4
47
7
6
10
8
10

MU ( 0.2 )
NP ( 0.18 )
PF ( 0.15 )
PJ ( 0.12 )
PK ( 0.1 )
PN ( 0.06 )
PP ( 0.07 )
PR ( 0.1 )
JP
MU
NP
PF
PH
PJ
PK
PN
PP
PR
CAUTION : THE USE OF POWER TOOLS TO ASSEMBLE THIS PRODUCT WILL INVALIDATE.
ANY CLAIM AND MAY DAMAGE THIS PRODUCT MAKING IT UNSAFE.
PAGE 7 OF 9
SEC/SH/11/16/EU1
STEP 5.1 STEP 6.1
E8 PCS
B
YOU WILL NEED:- YOU WILL NEED:-
4 PCS
G
B
PLEASE INSERT THE BACK PANEL INTO THE UNIT
E
BACK SIDE VIEW
BEFORE FIXING THE TOP PANEL
PLEASE ALIGN THE TOP PANEL
WITH THE INNER TOP PANEL . I
K
3 SETS
6 PCS
C8 PCS
STEP 5.2
STEP 6.2
STEP 6.3
I
K
11
11
11
1 & 5
BEFORE FIXING THE TOP
PANEL PLEASE ALIGN THE
TOP PANEL WITH THE INNER
TOP PANEL
8
9
1 & 9
10
10
A
10
G1 PC
5
6
7
7
7
2
C
96
8
7
7
C
8

NA ( 0.15 )
NB ( 0.18 )
NC ( 0.25 )
PY ( 0.15 )
RA ( 0.13 )
NA
NB
NC
PY
RA
RB
CAUTION : THE USE OF POWER TOOLS TO ASSEMBLE THIS PRODUCT WILL INVALIDATE.
ANY CLAIM AND MAY DAMAGE THIS PRODUCT MAKING IT UNSAFE.
PAGE 8 OF 9
SEC/SH/11/16/EU1
YOU WILL NEED:-
A 4 PCS
D 4 PCS
4 PCS
STEP 8
E
F
H
J
K
1 PC
2 SETS
2 PCS
6 PCS
J
E
MK
1 X DRAWER
M2 PCS
LAST THIRD HOLE
THIRD HOLE
BACK
FRONT
STEP 7.1
STEP 7.2
STEP 7.4
STEP 7.5
A
DF
STEP 7.2
H
H
M
M
12 13
14
15
16
16
13&14
13&14 15
15
15

CAUTION : THE USE OF POWER TOOLS TO ASSEMBLE THIS PRODUCT WILL INVALIDATE.
ANY CLAIM AND MAY DAMAGE THIS PRODUCT MAKING IT UNSAFE.
PAGE 9 OF 9
SEC/SH/11/16/EU1
WARNING
Serious or fatal injuries can occur from furniture tipping
over. To prevent the furniture from tipping over we
recommend that it is permanently fixed to the wall.
Wall fixings are not supplied with this product as different wall
materials require different types of fixing devices.Please make
sure you use fixings suitable for the walls in your home.
HARDWARE LIST
( N ) Anti-Tip Strap - 2 pcs
( O ) M4 X 16MM - 2 pcs
TOP
WALL
TOP
WALL
TOP
N
N
O