Seconique JENNY 2 User manual

DO NOT
USE
!
IMPORTANT
PLEASE READ BEFORE YOU CONTINUE FURTHER
THE PRODUCT YOU HAVE PURCHASED WILL GIVE YOU MANY YEARS OF
SERVICE IF YOU FOLLOW THE GUIDELINES FOR ITS SAFE ASSEMBLY
AND PERIODIC MAINTENANCE AND CLEANING.
ASSEMBLE ON A SOFT CLEAN SURFACE.
DO NOT USE ANY TOOLS OTHER THAN THOSE SHOWN.
ANY SPANNERS OR ALLEN KEYS REQUIRED ARE INCLUDED WITH THE
FITTING KIT.
DO NOT FOR ANY REASON USE A POWER TOOL TO ASSEMBLE THIS
PRODUCT. ITS USE WILL INVALIDATE ANY CLAIM YOU MAY HAVE AND
COULD MAKE THIS PRODUCT UNSAFE.
DEPENDING ON THE AMOUNT OF USE THIS PRODUCT RECEIVES IT MAY
BE NECESSARY TO TIGHTEN UP THE FIXING FROM TIME TO TIME. THIS
IS COMPLETELY NORMAL FOR ANY FLAT PACK FURNITURE.
DO NOT OVERTIGHTEN FIXINGS.
FOR CLEANING YOU MAY USE A DAMP CLOTH ( NOT WET). DO NOT USE
POLISH, DETERGENT OR CHEMICAL CLEANERS.
THE SURFACE OF THIS ITEM IS NOT HEAT RESISTANT. ALWAYS USE A
PLACE MAT UNDER HOT OR COLD ITEMS TO PREVENT MARKING.
SEC/SH/04/21/FZ1
PAGE 1
54479
JENNY 2 DRAWER DESK
ASSEMBLY INSTRUCTION
FOR DOMESTIC USE ONLY

PAGE 2
SEC/SH/04/21/FZ1

HARDWARE ITEM FOR ANTI-TIP
Strap
E20
A7
A33
1
QTY
Wood Screw 3.5 x 30mm
Washer
1
2
PLEASE CHECK THAT YOU HAVE ALL THE PARTS LISTED BEFORE YOU START
ASSEMBLING.
IF YOU DO FIND THAT SOMETHING IS MISSING, DO NOT CONTINUE ASSEMBLY.
PLEASE CONTACT YOUR SUPPLIER IMMEDIATELY.
1TOP PANEL
2LEFT HAND SIDE PANEL
RIGHT HAND SIDE PANEL
3
4BACK PANEL
5CENTRE PANEL
6CROSSBAR
7DRAWER FRONT
8DRAWER SIDE PANEL-RIGHT
9
10
1
1
1
1
1
1
2
2
2
2
PARTS LIST
USE OF POWER TOOLS TO ASSEMBLE THIS PRODUCT WILL INVALIDATE
ANY CLAIM AND MAY DAMAGE THIS PRODUCT MAKING IT UNSAFE
PARTS LIST
A
1
2
3
45
6
9
10 8
11
7
A17
A6
HARDWARE ITEM QTY
A8
M4 x 32mm Screw
4
Wood dowel 6 x 25mm
8
8
A2
N3
10
M3.5 x 14mm Screw
D4
4
D6
Handle
H3
F2
M3
11sets
R2
M4 x 25mm Screw
Plastic Foot
Tack
20
Crosshead Screw M6.3 x 40
8
2
Wood dowel 8 x 25mm
4
2
Cam nut & Cam Bolt
Drawer Runners 2 sets
NOT PROVIDED
Single Plastic Cap
PAGE 3
SEC/SH/04/21/FZ1
1
Allen Key
11 DRAWER BOTTOM 2
DRAWER SIDE PANEL-LEFT
DRAWER BACK PANEL
Y
Mini Fix Cap 8
(+-3)
L1
N1
A34
8
M5 x 8mm Euro Screw

Left side slider
Right side slider
Attach the Drawer Runners 250mm (M3) to panel
no. 3 & 5.
STEP 1
USE OF POWER TOOLS TO ASSEMBLE THIS PRODUCT WILL INVALIDATE
ANY CLAIM AND MAY DAMAGE THIS PRODUCT MAKING IT UNSAFE
2
3
4
11
8
7
11
8
11
10
9
8
7
STEP 2
Join panel 2, 3 & 4 together using Wood Dowel 8 x 25mm
(D6) and Crosshead Screw m6.3 x 40mm (A17)
Join panel 5 & 6 to the unit with Crosshead Screw m6.3 x 40mm (A17).
STEP 4 STEP 5
7
8
10
9
10
8
9
8
11
PAGE 4
SEC/SH/04/21/FZ1
PANEL 5
PANEL 3
4
2
3
1
Use Cam Nut & Cam Bolt (F2) & Wood Dowel 8 x 25mm
(D6) to fix the top panel to the unit.
STEP 3
4
2
1
6
3
5
M3
A2
A34 A34
M3
A34 A34
D6
D6
A17
Y
A17
Y
A17
Y
A17
Y
L1
L1
L1
L1
Button the screw head with Crosshead Cover (Y).
F2
F2
F2
F2
F2
D6
D6
D6
N1
Use Allen Key (N1) to tighten the Crosshead Screw (A17).
A17 Y
A17
Y
A17
Y
F2
A8
A8
F2
D6
F2
D4
D4
D4
F2
N2
N2
N2
N2
N2
A2
M3
R2
M3
A2 A2
A2
A2 A2 H3
A6
Use Allen Key (N1) to tighten the Crosshead Screw (A17) & button the
screw head by Crosshead Cover (Y).
Assemble the 2 sets drawer as shown below.

PAGE 5
SEC/SH/04/21/FZ1
30