DREAMS Mount Double User manual

WARNING!HAZARD DO NOT REACH INTO THE SPACE BELOW!
Two person
assembly
1.5 hour approx
assembly time
Mount Ottoman Bed
MK1 220620
You must ensure that the mattress is on the bed frame before operating the lift mechanism – Failure
to do so could result in injury.
Keep hands clear of the mechanism when opening or closing the ottoman.
Beware of entrapment – Never reach in through the mechanism to access the storage area.
Always ensure that the ottoman is FULLY opened before accessing the storage area.
Do not exceed the maximum weight as specified in the table below:
•
Bed Bed Size Min Weight (kg) Max Weight (kg)
Mount
Double 2058
King
Super King
20
20
58
58
Don’t lift without mattress
•
•
•
•
Ottoman Safety Warnings
Important - read this guide carefully and retain for future reference.
Ensure mattress is on before lifting
Double & King Size Super King Size

Mount Ottoman Bed - Assembly guide - Page 2
Assembly tips
Before you begin, it’s best to identify all parts and fittings to build your bed.
We advise laying these out on the floor to check you have everything, and
familiarising yourself before building.
Help and support
At Dreams, it’s our mission to give the whole nation a great night’s sleep - this
means that the quality of our products is of utmost importance to us. If there
are any issues with your product or any missing parts, please contact our Help
Centre on 0800 652 6750, where a member of our team will be happy to help.
(For customers based in Northern Ireland, please call 028 9050 8300)
Safety and care
It’s really important to ensure children and animals are kept away from the
assembly area, as there are small components used in this bed which could
present a choking hazard. All plastic and wrapping materials should also be
To keep your little ones busy, there is a colouring page inside the back cover.
Recycling
Please ensure that packaging is disposed of in a safe and environmentally
friendly way, and recycle where possible. Our assembly instructions are
printed on recycled paper. Please keep your assembly instructions safe
to refer back to in the future.
We recommend that you build your new bed in the room you’d like it to be
located - this will help prevent any risk of damage to your newly built bed
whilst moving it.
Top tip
Thank You
Dear Customer, Thank you for choosing to purchase your bed from Dreams - we hope it brings you
your best ever night’s sleep. Before you begin building your bed, please take a moment to read
through the instructions and make sure that you've got all the relevant parts listed on the following
pages.

Mount Ottoman Bed - Assembly guide - Page 3
A
1
1
1
1
2
A. Headboard
B. Footboard
C. Side Rails - Left
D. Side Rails - Right
E. Mattress Stoppers
F. Angle Brackets 2
1
2/3
1/2
1
G. Slat Frame Support Rail
H. Storage Base Boards (footend)
Double & King/Super King
Double & King/Super King
I. Storage Base Board (headend)
J. Metal Slat Frame for Double or King size
1M. Metal Slat Frame for Super King size
K. Cross Bar
‘U’ Shaped Bar
1
L.
B
C
F
F
G
I
H
H
J
M
K
L
E
D
Parts list
Parts
Important information
The bed you have purchased comes complete with it's own set of metal slat frame please follow the
instructions below in the current order. Before you begin building your furniture, please take a
moment to read through the instructions and make sure that you've got all the relevant parts listed
on the following pages.
0 1 2 3 4 5 6 7 8 9 1010 11 12 13 14 15 16 17 18cm
Tools required
No more tools needed.
1/2
Double & King/Super King

Mount Ottoman Bed - Assembly guide - Page 4
Spring Washers for M8 bolt
Hardware included for bed assembly (pack A)
Hardware included for metal slat frame assembly (pack B)
a x20
Flat Washers for M8 bolt
Spring Washers for M8 bolt Flat Washers for M8 bolt
b x20 c x23 d x1
h x2 i x6 j x1
Allen Key for M8 bolt
f x6 g x2
Fittings
Please check you have all the parts listed below with your product:
Flange lock-nuts M8
for gas-lift pistons Nuts for M8 bolts Spanner for M8 nut
Metal Connection Plates
k x4
Screw (Ø5x50mm)
Bolts (M8x30mm)
Fitting side rails (C&D) to
headboard & footboard (A&B)
e x6
b x12 c x18
Bolts (M8x50mm)
Fitting metal slat frame (J)
to gas-lift mechanisms
e x3
Bolts (M8x50mm)
Fitting slat frame support rail
(G) to footboard (B)
Bolts (M8x20mm)
Fitting metal connection plates
(g) to metal slat frame (J)
1
Bed assembly
a
x12
b
x12
c
x12
d
x1
A
A
B
B
C
D
a
cba
d
cb
ac
b
d
C
&
D
C
&
D
Do not tighten bolts yet.

2
3
a
x8
b
x8
c
x8
d
x1
F
F
F
a
c
b
d
Do not tighten bolts yet.
B
C&D
e
x3
c
x3
d
x1
100%
B
G
c
d
e
Mount Ottoman Bed - Assembly guide - Page 5
G
Make certain the bed is squared up
as shown in the diagram then tighten
all bed assembly bolts 100%.
Fit the slat frame support rail (G) using
bolt sets (e) & flat washers (c).
3
Double & King Size
Super King Size
B
G
c
d
e

Mount Ottoman Bed - Assembly guide - Page 6
4
k x2
5
k
x4
I
I
I
H
H
H
H
H
L
CD
&
Slide in the s
Double & King Size
Super King Size
torage base boards (H&I)

Metal slat frame assembly
Mount Ottoman Bed - Assembly guide - Page 7
6
To top of slat frame, fit two connection plates (g) using four sets of bolts (f), spring washers (b) &
flat washers (c), screw into the threaded inserts on top of the frame.
Do not tighten yet.
iii)
ii)
Fitting position for cross bar (K) is clearly
labeled. Pass the bar through the gap
between first & second slat. Then
carefully open the .
x2
The cross bar fixing plates sit on top of each
side of the slat frame (J), sit the plates on the
round labels. Align each bolt with the threaded
holes and loosely fix through the plates using
bolts (f), spring washers (b) & flat washers (c).
Now use allen key (d) to tighten all six bolts 100%.
F
I
T
C
R
O
S
S
B
A
R
H
E
R
E
i)
g
x2
f
x6
c
x6
d
x1
b
x6
K
K
f
c
b
K
f
c
g
b
J
M
M
J
Double & King Size
Double & King Size
Super King Size
Super King Size
K

WARNING!HAZARD DO NOT REACH INTO THE SPACEB ELOW!
WARNING!HAZARD DO NOT REACH INTO THE SPACEB ELOW!
2mm
j
x1
h
x2
j
h
8
9
E
Mount Ottoman Bed - Assembly guide - Page 8
Fit the mattress stoppers (E), making
sure they pass right through both the
top & bottom of the metal frame.
Note: Be very careful what you store
under the bed - the top of an item,
like a suitcase or a box, must not
touch the slats or they may be
damaged. Maximum storage height
is 260mm.
Fit piston stems to axles and fit lock - nuts (h). Tighten them with
spanner ( j) but note, a small 2mm gap is needed so stems can move
freely - this is important so do not over-tighten - see sketch above .
7
c
x12
e
x6
b
x6
j
x1
i
x6
d
x1
e
c
cb
i
j
Using three bolt sets on each side (b), (c), (e) & (i), fix slat
frame loosely to the bars but do not tighten fully yet.
Bolt into centre of long holes
Carefully lay the slat frame on the support bars
making sure the bed is still square and there is
an even gap all round as in the sketch.
8 mm
Tighten all six bolt sets
100% using spanner (j)
& Allen key (d).
i)
ii)
iii)
J
E
E
d

WARNING!HAZARD DONOTREACH INTOTHESPACEBELOW!
Mount Ottoman Bed - Assembly guide - Page 9
Warning
You must ensure that the mattress is on the bed frame before operating the lift mechanism – Failure
to do so could result in injury.
Keep hands clear of the mechanism when opening or closing the ottoman.
Beware of entrapment – Never reach in through the mechanism to access the storage area.
Always ensure that the ottoman is FULLY opened before accessing the storage area.
Do not exceed the maximum weight as specified in the table below:
•
•
•
•
•
Use caution when operating, always use the handle when lifting.
Note: This bed uses a pressurised mechanism.
To be operated by adults only
Please ensure that children and pets are kept away from the bed when operating the lift mechanism.
Keep children and pets away from the storage area.
Do not overload the internal storage base.
Do not stand inside the internal storage area of the bed.
Before removing the mattress secure the frame to ensure it does not open unexpectedly.
Do not attempt to lie on the mattress when the ottoman is in the raised position.
When lifting the ottoman remove all bedding except the fitted sheet.
•
•
•
•
•
•
•
•
•
•
WARNING! HAZARD - DO NOT REACH INTO THE SPACE BELOW!
SAFETY WARNING
PLEASE DO NOT ALLOW CHILDREN
OR PETS INSIDE THE STORAGE AREA.
SAFETY WARNING
PLEASE BE CAREFUL WHEN LIFTING.
ONLY LIFT WITH MATTRESS ON TOP.
TO BE OPERATED BY ADULTS ONLY.
WARNING: ONLY USE THE HANDLE TO LIFT &
LOWER THE BED FRAME TO
AVOID TRAPPING FINGERS!
TO AVOID ACCIDENTS
TO ACCESS THE STORAGE AREA THE OTTOMAN FRAME
MUST BE FULLY OPENED AND THEN FULLY CLOSED AFTERWARDS
Don’t lift without mattress Ensure mattress is on before lifting
Bed Bed Size Min Weight (kg) Max Weight (kg)
Mount
Double
King
Super King
2058
20
20
58
58

Mount Ottoman Bed - Care and maintenance guide - Page 10
Care and maintenance
Here are some tips to keep your new bed in tip-top condition
Cleaning
To clean your new bed, we'd advise using a warm damp cloth or if fabric, remove
dust using a low suction vacuum cleaner. Please dry-clean the pillows if it is
necessary to clean them.
Please do not use abrasive chemicals or bleach as this may damage the product.
Checking and moving
Periodically we recommend you check that the screws or fixtures haven't become
loose over time. To move your new bed, we recommend lifting it where possible, as
dragging or pushing it could cause damage to the legs or flooring.
Wood
Please note each of our wooden pieces are unique, meaning that markings and
shade can vary slightly between beds. Over a period of time, the wood might
lighten or fade slightly due to light exposure.
Fabric
Please note depending on the lighting, positioning and surroundings of your
period of time, the colour might lighten or fade slightly due to light exposure.
Metal
Metal tends to be more resilient to everyday wear and tear. We recommend to
gently dust your metal furniture and keep it dry to maintain its look.
Thank you for shopping with us - we hope you have a
great night's sleep.
12.5
W
H
L
4
5.5
37
0.8
670 x 53 x 9
745 x 53 x 9
Overall Dimensions (LWH cm)
Double: 211 x 149 x 116
King: 221 x 164 x 116
Super King: 221 x 194 x 116
Internal Dimensions (LWH cm)
Double: 194 x 138 x 26
King: 204 x 153 x 26
Super King: 204 x 183 x 26
Distance between slats (cm)
Double: 9
King & Super King: 8.7
Ottoman Piston Rating
Double & King: 900 N
Super King: 1000 N
Slat Dimensions (LWH mm )
Double:
King:
Super King:
600 x 53 x 9
33.2
Floor to top
of slat
3.8
Top of side rail
to top of slat