Secret Lab Magnus User manual

NUMBER OF PLAYERS
2 PLAYERS
PLEASE READ FIRST
10 MINUTES
ASSEMBLY TIME
15 MINUTES

1
WARNING
This desk is designed for indoor use and dry work areas only. Under no circumstances does the
manufacturer accept warranty claims or liability claims for damages caused from improper use
or handling of the desk.
This document contains important safety regulations. Any non-conforming use may result in
personal injury or mechanical damage.
Please read this user manual carefully before use as it provides key information about
safety, use, assembly and maintenance of the desk.
Ensure that you have received all parts according to the part checklist prior to installation.
If any parts are missing or faulty, contact the Secretlab support team for replacements.
This product is to be assembled by at least two people.
This product contains small items that could be a choking hazard if swallowed. Keep these
items away from children.
Do not over tighten the screws during installation.
Do not open and close the hinged rear cover from the middle, only open and close from the
sides. Always watch your hands and fingers when opening and closing the rear cover.
Do not exceed the maximum load capacity of the table top (100kg) and rear cover (25kg).
Do not wobble the desk forcefully on purpose.
This product is designed for indoor use only. Using the product outdoors could lead to product
failure and personal injury.
Place the product away from corrosive gas, water and dusty environment.
Alteration or modding of any factory components outlined in the checklist will automatically
void your warranty.
Do not place your hand
or fingers between the
rear cover and table top.
Do not exceed the
table top and rear cover
maximum load capacity.
Do not drag the desk
across the floor.
Do not sit on
the desk.
This desk is not intended
for use by children without
adult supervision.
Do not adjust the desk
height when there
is heavy top load.
Do not stand on
the desk.
Do not use the desk
surface as a
cutting surface.
1

2

FRONT LEG
A
REAR LEG
C
FRONT LEG
B
REAR LEG
D
3

TEAM LIFT
4
40 - 48 KG

REAR LEG
C
REAR LEG
D
X4
LONG SCREWS
TEAM LIFT
5

1
4
STAGE 1
COMPLETE
FRONT LEG
A
REAR LEG
C
FRONT LEG
B
REAR LEG
D
3
2
X16
SHORT SCREWS
X2
PAN HEAD SCREWS
6

STAGE 2
COMPLETE
TEAM LIFT
X2
SHORT SCREWS
Do not rest weight
on the side of the legs.
7

X4
PAN HEAD SCREWS
COMPLETE
STAGE 3
8

STAGE 4
COMPLETE
ADJUSTING THE
DESK HEIGHT
Using the larger height adjustment allen
key, turn clockwise to increase the height
and anti-clockwise to decrease the height.
Do not adjust when there is heavy load
on the desk.
Height Adjustment Range: +20mm
HEIGHT
ADJUSTMENT
HANDLING THE
REAR COVER
Always open and close the hinged
rear cover from the sides. Do not open and
close the cover via the middle of the desk and
keep hands and fingers clear of this area.
LIFT FROM SIDES
CLOSE FROM SIDES
9

[OPTIONAL]
MOUNTING
MONITOR ARM
If you plan on using a monitor arm with the
Secretlab Magnus, we recommend it to be
mounted within the midsection of the desk.
It will be easier to access the monitor arm
hardware through the front of the tray from
underneath the table.
MOUNTING THE
TRAY COVER
The Secretlab Magnus is now ready for
your long hours of work or play!
10