TECHNOGEL™PREMIUM ARMREST TOP USER MANUAL
INSTALLATION GUIDE
To detach the armrest top, grip the armrest top in the middle
and gently lift the inner edge of the armrest at an angle. The
armrest top should then pop out.
Note:
Only for CloudSwap™Compatible Armrest Tops.
Detaching the armrest tops01.
Grip the middle section of the new armrest top and set the outer
edge down at an angle. Next, gently lower the inner edge of the
armrest top. The armrest top should snap in place over the
armrest mechanism.
Note:
Only for CloudSwap™Compatible Armrest Tops.
Installing the Technogel™Armrest Tops02.
AFTERCARE GUIDE
Do not use your armrests outside of its intended usage
Improper use can damage your armrest or even cause injuries. To
ensure your safety, please always follow the given instructions.
General Cleaning
For general cleaning, dust the surface gently with a clean, dry
cloth. Do not rub the surface harshly to avoid damaging it.
To remove residual stains, spot clean by gently rubbing the area
with a damp cloth soaked in water. Gently dry the surface with a
clean, dry cloth. Leave to air dry.
Do not abuse it
Even the toughest of armrests will not be able to stand up to
rough and inappropriate use. Avoid placing heavy or sharp objects
on the armrest over extended periods of time, especially at
pinpoint pressure.
Lower your armrest when sliding the chair under your desk to
prevent unwanted knocks
Do not use abrasive scrubbers or harsh cleaners
Avoid the use of alcohol-based cleaners, abrasive cleaners as
they can damage the surface of the armrest top.
Avoid heat
Avoid the use of a hair dryer or any other direct heat source to
dry the product. Always leave to air dry.
To view this manual in the following languages, please
scan the QR Code to the left.
Pour consulter ce manuel dans les langues suivantes,
veuillez scanner le QR code à gauche.
Um dieses Handbuch in den folgenden Sprachen
anzuzeigen, scannen Sie bitte den QR-Code auf der linken
Seite.
Scan de QR-code naar links om deze handleiding in de
volgende talen te bekijken.
本マニュアルを以下の言語でご覧になるには、左のQRコード
をスキャンしてください。
이 설명서를 다음 언어로 보시려면 왼쪽에 있는 QR
코드를 스캔하세요.
เพื่อดูคู่มือนี้ในภาษาต่าง ๆ โปรดสแกน QR Code ที่อยู่ด้านซ้าย
Đểxem sổtay hướng dẫn này bằng ngôn ngữkhác, vui
lòng quét Mã QR ởbên trái.
Untuk melihat panduan ini dalam bahasa lainnya, silakan
scan QR code di sebelah kiri.
لعرض هذا الدليل باللغات التالية، يرجى إجراء مسح ضوئي
لرمز الاستجابة السريعة QR الموضح على الجانب.
Other Languages
For additional support and full warranty terms and
conditions, please scan the QR code or visit our
website
secretlab.co/support
Need any help?
