BDI Revo 9980 User manual

RevoTM9980
Assembly Instructions
HIGH PERFORMANCE
FURNITURE FOR YOUR
HOME THEATER
5/2007

2
Your Revo™Home Theater Furniture is engineered for easy assembly. Carefully follow this
procedure to prevent any damage.
Placement and Maintenance
Revo™Home Theater Furniture is designed for indoor use on level floors. Clean glass with glass cleaner.
Clean steel parts and wood veneer with a moist cloth.
Revo™Home Theater Furniture www.bdiusa.com
customerser[email protected]
Phillips Screwdriver x 1
A- Glass Shelf x 2
B- Shelf Pin x 8
C- Retention Clip x 8
Step 1
Unpack and identify the parts listed.
The assembly workspace should be a non-marring surface such as carpet.
For missing hardware pieces, please contact BDI Customer Service at:
customerser[email protected]
All other concerns please contact your local BDI Retailer.
Install Shelf Pins (B) and Glass Shelves (A).
A x 2
C
Allen Wrench x 1
(Only required for
disassembly of unit)

1
1
44
Step 2
Secure Glass Shelves
To secure the shelves on your Revo unit, it is necessary to install
the Glass Retention Clip (C). It is secured by the Shelf Pin (B).
1. Install the 8 Shelf Pins (B) at desired location, 4 shelf
pins per shelf.
2. Install Glass Shelves (A x 2)
3. Install Retention Clips (C) as shown in “Pin Assembly
Diagram”
4. Secure by tightening the Shelf Pin (B) with Phillips
Screwdriver.
Pin assembly diagram
1 : Retention clip (C)
2 : Glass Shelf (A)
3 : Shelf Pin (B)
4 : Cabinet wall
Retention clip (C)
Shelf pin (B)
Detail of Shelf Pin
(B) and Retention
Clip (C)

4
Step 3
Install Back Panel.
The back panel comes pre-installed. Follow illustrations below for installation and removal.
NOTE: Mouse hole is on bottom edge of back panel. It aligns with pre-installed Velcro strap for wire management.
Designed by Louis Lara.
‘Revo’ is a trademark of Becker
Designed, Inc.
All rights reserved. ©2006
Becker Designed, Inc.