Secure me V6 User manual

Visit www.securemedevices.com/support Visit www.securemedevices.com/support Visit www.securemedevices.com/support Visit www.securemedevices.com/support

SMDSIMRFV6

instructions

Thanks for your use our products, V6

produce by quad-band GMS/GPRS module with

good quality. V6 have SOS function, vibration

sensor and sound sensor trigger call back

function. The LBS tracking function, you can track

anything in anywhere. V6 also can be

installed in a car, family, company, stores, homes

and valuables, when it moves the alarm will

inform you, ensure that family life and property.

V6 have small size, voice clear, long time standby ,

simple operation, stable performance, remote

control, etc.

Important, please read

V6 was designed for your valuable goods

security a nd positioning, the company assume

no liability or responsibility for any behaviors

violate other individual’s privacy.

All LBS have some position error,the

reference positions indicated by this product

are for you reference only,may also have

errors.

There may be delays caused by telecom carrier

at certain circumstance. Our company is

exemption from liability to security of person

and property.

Product view:

*Photos are for reference only, please in kind

prevail.

Usage:

Please choose GSM network-based SIM card

for the product. All the functions of this product can

be set via SMS instructions.

Boot: Please take the back cover and insert the SIM

card into the card slot as directed. A quick flash of

the blue light one time indicates the power supply

has been turned on. The light will flash 3 times

about 30 seconds later to signal successful access

to the network.

Switch language

Send LAG1 change the language to Chinese.

Send LAG2 change the language to English.

Send LAG3 change the language to Russian.

Emergency contact function:

This product can bind up to five emergency

contact numbers. The five emergency contact

numbers can monitor this product remotely

and receive SOS reports.

Bind emergency contact numbers: send SMS

Visit www.securemedevices.com/support Visit www.securemedevices.com/support Visit www.securemedevices.com/support Visit www.securemedevices.com/support

HM1 (2,3,4,5) to set the emergency contact

numbers. For instance, sending HM1 in an

SMS via phone A will set the number of pho ne

A for emergency contact 1. This product will

reply with an SMS:

The emergency number

1(2,3,4,5) has been set successfully!

SOS function: Press the SOS button for 5

seconds to make this product send an SMS to

the emergency contacts:

SOS! Help!

It will call

all the emergency contacts 2 times. V6 have

no speakerphone,so please use headphone

chat with emergency contacts.

Remote listening function: The product will

automatically answer calls by emergency

contacts for you to listen to sound around the

product for safety. (In response to calls by

other numbers, the product will say: The

number you dialed is not answered for the

moment so as to protect personal privacy)

AGPS function:

Send LBS in an SMS to V6 for a report of base

station code information including address

description and map site URL. (Please make

sure GPRS function is available.)

Alarm function:

Voice sensor alarm :Send GDM 1 turn on voice

sensor alarm ,v6 will confirm the SMS sender

as :

network signal: strong (good, fair,poor).

Remaining power **% . Voice sensor alarm

opened!

when sound around , the product will

inform the SMS sender.

Send TIM** to set the time interval of the

voice alarm, TIM05 for 5 minutes. The V6 will

not report for voice alarm 5 minutes within the

previous one.

Send GDM2 turn off voice sensor alarm .v6

will confirm the SMS sender as :

network

signal:strong(good,fair, poor). Remaining

power **% . Removal Defenses!

Vibration sensor alarm:Send GDM3 turn on

vibration sensor alarm, v6 will confirm the

SMS sender as:

network signal: strong

(good,fair, poor).Remaining power **% .

Vibration sensor opened!

when valuables

was moved or vibrated,V6 will inform the SMS

sender.

Send GDM 4 turn off vibration sensor alarm .

you will receive a SMS as :

network signal :

strong (good, fair, poor). Remaining power

**% . Vibration sensor closed!

Change the alarm mode:

send MOD1 the alarm mode will change

as :

Alarm mode has been changed to: send

SMS first, and then call.

send MOD2 the alarm mode will change

as :

Alarm mode has been changed to: only

call.

send MOD3 the alarm mode will change

as :

Alarm mode has been changed to: Send

SMS only.

Other function:

The current state inquires:send DSP can

inquire the current state of the network ,

battery life, and security alarm condition.

Low battery remind function: when the

battery less than 10% ,the emergency contact

1 will receive a SMS as:

The remaining power

is low, and please recharge immediately !

Visit www.securemedevices.com/support Visit www.securemedevices.com/support Visit www.securemedevices.com/support Visit www.securemedevices.com/support

Location platform