Smartlink Medi-minder User manual

MEDI-MINDER

USER MANUAL

TABLE OF CONTENTS

TABLE OF CONTENTS..................................................................1

INTRODUCTION.............................................................................1

MEDI-MINDER FEATURES..........................................................2

PENDANTS & DETECTORS.........................................................3

USING MEDI-MINDER.................................................................. 3

DISPLAYS AND WARNINGS........................................................5

CELLULAR SIGNAL QUALITY.................................................. 6

CELLULAR UDP/SERVER............................................................6

SPECIFICATIONS...........................................................................7

INTRODUCTION

Your SmartLink Medi-Minder unit has been designed to provide you with the

freedom and peace of mind in that, should you need assistance or HELP, it is

available to you 24 hours a day with the simple press of a Button.

The modern slim line design of the SmartLink Medi-Minder unit allows it to be

installed unobtrusively anywhere and is ready when you need help. HELP can be

summoned by pressing a Button on your personal Pendant or Wristwatch, which you

can wear both inside your home or outside in the garden, ready for any emergency,

giving you the freedom you enjoy for total control at all times.

The SmartLink Medi-Minder unit has been built to the highest of technical standards

for the protection of people and property and manufactured to Australian and

International quality standards.

Your SmartLink Medi-Minder unit can be supplied with additional fixed or portable

Radio Key Pendants, which can be worn or placed around the home as needed. Please

contact your supplier for more information.

MEDI-MINDER FEATURES

I/P 1

2&O/P1

Plug Pack

9V DC 300mA

(Part No. 840-050)

Hardwird Inputs & Outputs

Lead Assy 230mm 6 Way

(Part No. 450-191)

Common - Black

Input 1 - Red

Input - White

Output 1 - Green

Output 2 - Brown

Output 3 - Blue

Rechargeable Battery

4.8V Ni-MH 1600mAh

(Part No. 142-031)

Direct Serial DB9 Pin

Programming Lead

(Part No. 450-185)

PENDANTS & DETECTORS

Wrist/Neck Chain

or Fixed Waterproof

2WayPendants

(106-183)

(915.8 to 927.2 MHz)

TWR Wall Mounted

Wireless Call Point

(100-841)

Wireless Interface

for PSA 240VAC

Smoke Detector

(100-842)

PSA 240VAC

Smoke Detector with

9V Rechargeable Battery

(100-054)

Neck Chain or

Wristwatch Waterproof

VIBRATING 2WayPendant

(106-223)

TWR LUX PIR with inbuilt

LED Night Light (Inactivity)

(2 x CR123A 3V Batteries)

(100-835)

TWR Wireless

Smoke Detector

(2 x CR123A 3V Batteries)

(100-838)

USING MEDI-MINDER

NORMAL OPERATION

Your Medi-Minder unit will normally look like this:

The MAINS ON Light & the CANCEL (GREEN) BUTTON should be ON.

TO CALL FOR HELP

You can make your Medi-Minder Call for Help by either:

Pressing the

HELP (RED)

BUTTON on

the Medi-

Minder unit.

The HELP (RED) BUTTON will

FLASH rapidly and the Medi-

Minder unit will start beeping.

This is a Pre-Alarm warning,

while this is sounding you can

Cancel the Help alarm by pressing

the CANCEL (GREEN)

BUTTON on the Medi-Minder

unit.

Pressing the

Large HELP

(Panic)

BUTTON on

your

Wristwatch/

Pendant for 2

Seconds.

If the CANCEL (GREEN)

BUTTON is not pressed within

the pre-alarm time (10 seconds),

then your Medi-Minder unit will

dial your Monitoring Centre using

the telephone line.

to is displayed.

(NOTE: Your Medi-Minder unit

will cut off your telephone for the

duration of the call to ensure that

there is no interference to the call,

this will normally take about 15

seconds).

When your Monitoring Centre has

received the Help Call, your

Medi-Minder unit will beep 7

times to let you know that the call

has been received. The HELP

(RED) BUTTON will now

FLASH slowly every 4 seconds to

indicate that your Medi-Minder

unit has called for Help.

Pressing the

front or Side

Lever HELP

(Panic)

Button(s) on

your Box Style

Pendant for 2

Seconds.

DISPLAYS AND WARNINGS

MAINS ON Light Flashing

AC Power Fail – Check/Make sure that the MAINS Power Plug Pack

is plugged in and turned ON at the Power Point.

Flashing & BATTERY LOW Light Flashing - Check/Make sure

that the BATTERY SWITCH is turned ON underneath the Medi-

Minder Unit. Contact your Installer/Monitoring Centre.

The Medi-Minder unit failed to send a message – Check/Make sure

that the telephone lead is plugged in & all telephones are working.

Contact your Installer/Monitoring Centre.

The Telephone Line has failed – Check/Make sure that the telephone

lead is plugged in. Contact your Installer/Monitoring Centre.

(The Medi-Minder unit will also beep for 25 seconds).

The CELLULAR has failed - Check/Make sure that the

Antenna/SIM Card is plugged in. Contact your Monitoring Centre.

(The Medi-Minder 3G unit will also beep for 25 seconds).

or is on the Display & HELP RED Button Flashing

The HELP RED Button on the Medi-Minder Unit has been Pressed.