Secutron MMX-BB-1001WPA User manual

LT-6161SEC Rev 0 May 2022 Page 1 of 2
MMX-BB-1001WP(R)A and MMX-BB-
1002WP(R)A Weather Protected Enclosures
Rated for Outdoor Environment Wet Location according to UL 864
122 °F (+50 °C) to −40 °F (−40 °C)
MMX-BB-1001WP(R)A Annunciator Installation
MMX-BB-1001WP(R)A External Dimensions
Notes: MMX-BB-1001WPA is a white model. MMX-BB-1001WPRA is a red model.
Connect chassis ground stud to earth ground.
To prevent water from entering the box:
• Use a threaded conduit connector to provide entry for cables.
• Apply outdoor-rated weatherproof silicone to the 4 mounting holes and around the
threaded conduit connector.
Refer to RAM-1032TZDS in LT-617 RA-1000 Series Manual for wiring instructions, DIP switch
settings, and operation.
Door
Backbox
Annunciator
(RAM-1032TZDS-CC shown)
GB-1001RAM guard bracket
for RAM-1032TZDS-CC
4 nuts
13/16”
12 15/16”
Mounting hole diameter
7/32” (0.215“)
Use #10 screws (outer
diameter 0.187”)
11”
9 1/2”
3 1/2”
Threaded conduit
connector (eld installed)
Suggested location
Apply outdoor-rated
weatherproof silicone to
the 4 mounting holes
and around the threaded
conduit connector.
31/32”
10 11/16”
Knockout diameter 7/8” (0.875”)
Use 1 of the 2 knockouts for wiring
11 1/8”
2 1/4” 13/16”
1 1/16”

LT-6161SEC Rev 0 May 2022 Page 2 of 2
MMX-BB-1002WP(R)A Annunciator Installation
MMX-BB-1002WP(R)A External Dimensions
Notes: MMX-BB-1002WPA is a white model. MMX-BB-1002WPRA is a red model.
Connect chassis ground stud to earth ground.
To prevent water from entering the box:
• Use a threaded conduit connector to provide entry for cables.
• Apply outdoor-rated weatherproof silicone to the 4 mounting holes and around the
threaded conduit connector.
Refer to RAM-1032TZDS and RAX-1048TZDS in LT-617 RA-1000 Series Manual for wiring
instructions, DIP switch settings, and operation.
Door
Backbox
RAX-1048TZDS-CC
RAM-1032TZDS-CC
GB-1001RAM guard bracket
for RAM-1032TZDS-CC
4 nuts for top annunciator
4 nuts for bottom annunciator
13/16”
Mounting hole
diameter 7/32” (0.215“)
Use #10 screws (outer
diameter 0.187”)
12 15/16”
11”
16 5/16”
3 1/2”
Threaded conduit
connector (eld installed)
Suggested location
Apply outdoor-rated
weatherproof silicone to the 4
mounting holes and around
the threaded conduit
connector.
Knockout
diameter 7/8”
(0.875”)
Use 1 of the 3
knockouts for
wiring
31/32”
8 31/32”
17 15/16”
13/16”
1 1/16”
10 11/16”
6 15/32”
2 1/4”