Sega TOKIO-TABLET User manual

1
User Manual
1 What’s Included
The following components are included with your purchased product:
z7 Inch Tablet PC
zPower Adapter
zUSB Cable
zQuick Guide
zUser Manual
2 Getting Started
Before using your Tablet PC for the first time, please read this manual
carefully and follow the instructions as described below.
3 Battery Charging
The tablet is equipped with a built-in rechargeable Lithium-ion battery. It is
suggested to fully charge the battery before use.
We strongly recommend using the power adapter included in the supplied
packaging, using other adapter may damage the tablet and void the
warranty.
Charging Process
zConnect the power adapter to your tablet, and plug the power
adapter into the nearest electrical outlet.
zUsers can still use the tablet while it is being charged.

2
4 Appearance and Buttons
4.1 Webcam
4.2 Volume +, Volume-
Press on the Volume +, Volume –buttons to increase or decrease the
sound volume.
4.3 Micro SD Card Slot
4.4 Power Jack
4.5 Micro USB Port
Connect to PC by using the USB cable provided for data transmission,
charging or connect to external USB devices.
4.6 Earphone Jack
Standard 3.5mm earphone jack
4.7 Power Switch
Turn on/off tablet
4.8 Back Camera

3
5 Turn ON/OFF Tablet
5.1 Turn On: after the battery has been fully charged, press & hold the power
switch for around 3 seconds to turn on the device. Screen lock will be
showed after starting up.
5.2 Turn Off: When the tablet is ON, press & hold the power switch for around
3 seconds and the system will popup out power off option, tap OK to turn
off the tablet.
5.3 Lock screen: quickly press Power Switch and release to lock screen.
5.4 Unlock screen: slide the lock icon toward onto the unlock icon to unlock the
screen and go to main desktop.

4
Remarks:
zWhen battery power has been used up, the tablet will shut down itself
automatically.
zIf you illegally turn off the device, restart will scan and restore the disk, it
may take longer time to enter into system.
6 Extended Storage
You can use Micro SD card as extended storage, this tablet accepts
maximum 32GB branded Micro SD card.
6.1 Install the Micro SD card: insert the Micro SD card into the TF card slot of
the tablet according to correct direction. The tablet will read the SD card as
soon as the card is well installed.
6.2 Remove the Micro SD card: press on the card inward a little bit to unlock,
then the card will be automatically ejected a little bit for your convenient
removal.
6.3 Below are some important notices when use the Micro SD card:
Put the card in the right direction(the card’s back side should face
down to LCD screen) when insert it into the tablet’s card slot.
Do not remove the card while it is being reading or saving data.
Do not use the card in the conditions of high temperature.
Keep your card in a safe place from liquids and corrosive chemicals.

5
7 Connection with PC
7.1 Using the USB cable provided to connect the tablet with PC, an icon
will appear on the top of screen, tap on it, and tap on “USB connected”,
then below USB connection screen interface will pop up, tap “Turn on
USB storage”to connect to PC, in the connection mode, you can copy or
delete the file from/to PC.

8 Tablet Desktop Interface
8.1 After starting up, you will enter into below main desktop screen interface:
8.2 On the main desktop interface, you can manage main interface app icons:
press on the icon and hold it for 3 seconds, then you can drag anywhere in

6
the main interface.
8.3 Delete icons: press the icon and hold it for 3 seconds, and drag the icon
onto the “”icon, then you can delete that icon from desktop.
8.4 The desktop screen has been separated into two areas by a white line,
touch on any blank area above the white line and hold your touch for
around 3 seconds, the dialog box “Choose wallpaper from” will pop out
as shown below:
You can choose the wallpaper from different sources and change the
wallpaper.

7
8.5 Status Bar Descriptions
Icons descriptions(at the bottom of the screen, from left to right): Back to
previous interface; Back to main desktop screen; Display theApps
performed previously; Screen shot; Volume decrease; Volume increase.

Icons descriptions (on the right top corner of the screen, from left to right):
Bluetooth connection; Wi-Fi connection; Battery capacity; Current time.
8.6 Quick Guide For Touch Operations
zDuring operations, by tapping on the back icon at the left bottom
corner of the touch screen, you can return back to previous step or
previous screen interface.
zNo matter which interface you are on the screen, you can go back to main
desktop screen by tapping on the icon located at the left bottom
corner of the main screen.
zTapping on the icons to increase or decrease the sound volume.
zTap on to see all history of Apps performed previously.
You can drag the icons upward or downward to delete them from history.
zOn the main desktop interface, you can touch the icon to see all the
APPS, tap on any App icon and hold it for around 3 seconds, you can
drag that App icon onto main screen interface.

8
9 Basic Settings
9.1 WIRELESS & NETWORKS
zWi-Fi
Tap on “Wi-Fi”setting and slide the “OFF”bar rightward to “ON”position to
open Wi-Fi, all available Wi-Fi networks will be listed, tap on your Wi-Fi
network and start to connect.
If the Wi-Fi network does not need a password, tap "connect" to start the
connection; If the Wi-Fi network needs a password, then input the
password and tap “connect” to start the connection. If the Wi-Fi network
has been successfully connected before, that information will be stored,
connection will be done automatically. Once your tablet connects to Wi-Fi
successfully, the Wi-Fi icon will appear on the right top corner of the
screen.


If the Wi-Fi network has been hidden, tap on and follow the steps to
add and connect the network manually.
You can tap on menu key located at the right top corner to get more
options and settings for your Wi-Fi network.

9
zEthernet
Tap on “Ethernet”slide the “OFF”bar rightward to “ON”position to
access Ethernet configuration
zBluetooth
Tap on “Bluetooth”slide the “OFF”bar rightward to “ON”position, then
the device will automatically scan and list all available Bluetooth devices.
Tap on the Bluetooth device name to start the connection.
You can also tap on “SEARCH FOR DEVICES”to manually search all
available Bluetooth devices, or tap on for more settings.