Segway miniPLUS User manual

The manufacturer reserves the right to make changes to the vehicle, release firmware updates, and
update this manual at any time.Visit www.segway.com to download the latest user materials.You must
install the App to follow the New Rider Tutorial, activate your vehicle, and obtain the latest updates and
safety instructions.
Scan to download the App
Whenever you ride your vehicle you risk injury or death from loss of control, collisions, and falls.
Be sure to read the User Manual and watch the Safety Video before riding. QUICK START
WARNING!
25524-00001 aa
Alternatively, go to the Google Play Store (Android) or the Apple App Store (iOS) and search for
"Segway" or "Ninebot" to download and install the App. Be advised there is a minimum
Android/iOS/Bluetooth version required. See User Manual for additional details.

To turn, gently lean left or right
against the steering bar.
6
Lightly place one foot on the
foot mat, while keeping your
other foot on the ground
holding your weight. Do not
press the steering bar with
your leg.
23Slowly transfer your weight onto
the miniPLUS. The unit will beep,
indicating it is now in Balance
Mode. Slowly step on with your
other foot.
Stand with your weight
evenly distributed on both
feet and relax, looking
straight ahead.
4Gently lean your body forward
and backward to control your
movement.
5
1
≥12 ft. (4 m)
≥12 ft. (4 m)
Go to a large open area and ask a
friend to assist you on your frst
ride.
WARNING!
Always step on from the back of
the miniPLUS.
WARNING!
If the miniPLUS sounds an alarm Or tilts back, slow down!
Complete the New Rider Tutorial
then enjoy your ride!
3
1Install the App and register/login. 2Power ON the miniPLUS.The Bluetooth icon
blinking indicates the miniPLUS is waiting for a
connection.
There are safety risks when riding the miniPLUS.You must read the User Manual,
watch the Safety Video, and follow the New Rider Tutorial in the Ninebot by Segway
App before your first ride.
For your safety, your miniPLUS is not activated at this time and will beep occasional-
ly after Power ON.
Until activated, the miniPLUS maintains a very low riding speed and steering
sensitivity, and should not be ridden. Install the Ninebot by Segway App on your
mobile device, connect to the miniPLUS with Bluetooth, and follow the App
instructions to activate your miniPLUS and follow the training procedures.
Click “Vehicle” →“Search device”to connect to your
miniPLUS. The miniPLUS will beep when the
connection is successful. The Bluetooth icon will stop
blinking and remain illuminated.
Follow the App instructions to learn how to ride safely.
Have fun!
WARNING!
If your miniPLUS intermittently sounds an alarm, stop riding and check the App (if connected) for details.
First Ride
Wear an approved helmet and
other protective gear to
minimize any possible injury.
Vehicle NFans Club Me
Discover