SEI MS0714A0TX User manual

Page |
1
PO#:
MS0714A0TX
MS0714B0TX
69"W Coventry Antique Black TV Console
Assembly Instructions
For assistance with assembly, contact:
Southern Enterprises Inc.
Customer Service: 1-800-633-5096
[email protected]om
www.seidal.com

Page |
2
69"W Coventry Antique Black TV Console
Parts List
Please review all parts and hardware before disposing of any packaging. Before beginning assembly, separate
each type of hardware. Carefully study the diagrams below and check that you have all parts indicated. Call
Customer Service if missing hardware. Using the incorrect hardware will cause damage.

Page |
3
Lower Back Panel

Page |
4
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew the
finish. Avoid rubbing or scratching the surface
with rough or abrasive objects.
For replacement parts or questions, please call
Customer Service at 1-800-633-5096.
Assembly Tool Required:
No.2 Phillips Screwdriver
(Not Included)
Ф5/16” x1-3/16”L
Wood Dowels
Ф1/4”x1-1/4”L
Bolt
Ф1/8”x1/2”L
Screw for Back Panel
Ф3/16”x3/8”L
Barrel Nut
Ф3/16” x 1-1/2”L
Bolt for Drawer Wood Knob
Ф5/32” x 7/8”L
Bolt for Knob
Ф5/32” x 7/8”L
Metal Pin Magnet
Ф1/8” x 5/8”L
Screw For Magnet

Page |
5
Figure 1
Unpack and lay parts on clean, padded
surface like carpet or blanket.
Insert two Wood Dowels (A) into the
corresponding holes on the bottom of
Side Panels (2/3) and two Wood
Dowels (A) into the bottom of Right
Middle Panel (4). Attach Side Panels
(2/3) and Right Middle Panel (4) onto
Bottom Panel (1). Be sure the drawer
guide on the Right Middle Panel (4)
faces the Left Side Panel (2) as shown
on Figure 1.
Secure Side Panels (2/3) and Right
Middle Panel (4) to Bottom Panel (1)
with Bolts (B) and tighten with
screwdriver.
Figure 2
Insert Wood Dowels (A) into
corresponding holes on Right Middle
Panel (4). Then, attach Fixed Shelves
(6) onto Right Middle Panel (4) with
attached Wood Dowels (A).
Attach Decorative Apron (7) to Bottom
Panel (1) with Bolts (B) and tighten.
69"W Coventry Antique Black TV Console
Assembly Instructions

Page |
6
Figure 3
Attach Left Middle Panel (5) to Bottom
Panel (1) and Fixed Shelves (6) with
Wood Dowels (A). Secure Left Middle
Panel (5) with Bolts (B) by inserting
Bolts through Bottom Panel (1). Tighten
Bolts with screwdriver.
Screw Feet (8) and Center Foot (18)
into Bottom Panel (1) and tighten by
hand.
Figure 4
Attach Doors (9/10) to Side Panels (2/3)
by using the preinstalled hinges as
shown in Figure 4.

Page |
7
Figure 5
Attach Magnets (I) to Top Panel (11) with
Screws for Magnets (J).
Figure 6
Insert Wood Dowels (A) into corresponding
holes on the top of Side Panels (2/3)
and Middle Panels (4/5).
Attach Top Panel (11) onto Panels (2/3/4/5)
with Bolts (B) and tighten.

Page |
8
Figure 7
Insert Top Back Panel and Lower Back
Panel (12/19) into grooves of Side Panels
with Screws for Back (C) and tighten.
Figure 8
Insert Nut (D) into corresponding holes on
Drawer Face Panel (13).
Attach Drawer Right Panel and
Drawer Left
Panel (14/15) to Drawer Face Panel (13)
with Bolts for Drawer (E) as shown on
Figure 8.

Page |
9
Figure 9
Insert Drawer Bottom Panel (17) into inner
grooves of Drawer Right Side, Drawer Left
Side Panels (14/15) and Drawer Face Panel
(13).
Insert Nuts (D) into corresponding holes on
Drawer Back Panel (16), then, attach Drawer
Back Panel (16) to the drawer assembly and
fasten with Bolts for Drawer (E) and tighten.
Figure 10
Attach Wood Knobs (F) onto the Drawer
Face Panel (13) with Bolts For Wood Knob
(G) and tighten.

Page |
10
Figure 11
Insert Metal Pins (H) into desired holes
on Side Panels (2/3/4/5).
Place the Adjustable Shelves (20) on
the Metal Pins (H).
Attach Wood Knobs (F) onto Doors
(9/10) with Bolts For Wood Knobs (G)
and tighten.
Insert the drawer into the bottom
space.
Figure 12
Now your TV Console is ready to use!