SEI MS7036 User manual

For assistance with assembly contact:
Southern Enterprises, Inc.
Customer Service 1-800-633-5096
[email protected]
www.seidal.com
MS7036 – Swivel top media
stand
Assembly Instructions

1 Quantity
of 1
Left side panel
2 Quantity
of 1
Right side panel
3 Quantity
of 1
Front upper brace
4 Quantity
of 1
Shelf
5 Quantity
of 1
Bottom panel
6 Quantity
of 4
Leg
7 Quantity
of 1
Top panel
8 Quantity
of 1
Upper back panel
9 Quantity
of 1
Lower Back panel
10 Quantity
of 1
Left door
11 Quantity
of 1
Right door
12 Quantity
of 1
Adjustable shelf
A Quantity
of 10
Cam Bolt
B Quantity
of 12
Wood Dowel
Quantity
of 10
Cam-Lock
D Quantity
of 4
Socket Hexagon Screw
Swiveltopmediastand
Parts List
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware. Do not return to store/retailer.
Screws shown in actual size. Using a screw that is too long will cause damage.
Before beginning assembly, separate each type of screw. Carefully study the
screw diagrams below (SHOWN ACTUAL SIZE). You may receive extra hardware
with
y
our unit.

E Quantity
of 4
Cam Nut
F Quantity
of 22
Round Head Screw
G Quantity
of 18
Flat Head Screw
H Quantity
of 1
Magnet Lock
I Quantity
of 2
Magnetic Plate
J Quantity
of 4
Hinge
K Quantity
of 2
knob
L Quantity
of 2
Long Bolt
M Quantity
of 3
Flat Head Screw
N Quantity
of 4
Shelf Holder
O Quantity
of 2
Connecting plate
P Quantity
of 1
Socket Head Wrench
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish . Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
Call Customer Service at 1-800-633-5096
Do not return product to store, please call
Manufacturer for assistance, questions or
Parts.
Assembly Tool Required
No.2 Phillips Screwdriver (Not Included)
Swivel top media stand
Assembly Instructions

Figure 1
Assembly Instructions:
Wood may scratch easily, Be
careful when assembling. Do not
scratch.
Unpack and lay parts on clean,
padded surface like carpet or
blanket. Check that you have all
parts indicated on the front page.
Connect the Left/Right side panel,
Front upper brace and Shelf /(1)
/(2)/(3)/(4), use 6pcs cam bolt
(A) and 4pcs wood dowel (B),
then rotate 6pcs cam lock(C)
clockwise to fix cam locks (A) until
completely tighten by a wrench
Figure 2
Connect bottom panel (5) to the
unit assembled at step 1 use 4pcs
wood dowel(B), 4pcs cam nut(E)
and 4pcs Socket Hexagon Screw
(D),tighten them by Allen wrench
(P).
Attach 1pc Magnet Lock(H) to the
shelf panel (4) use 2pcs Round
Head Screw (F);
Figure 3
Insert 4pcs legs(6) to the unit
assembled at step 2, then tighten
them clockwise.
Swivel top media stand
Assembly Instructions

Figure 4
Attach Top panel (7) to the unit
assembled at step 3, Use 4pcs
cam bolt(A)and 4pcs wood
dowel(B), then rotate 4pcs cam
lock(C) clockwise to fix cam locks
(A) until completely tighten by a
wrench.
Connect the Upper brace(3) and
top panel(7) use 3 pcs Flat Head
Screw (M)
Figure 5
Connect the back panel (8)/(9)
with 18 pcs round head screw(F),
then fix 2pcs Connecting plate (O)
to the back panel with 2pcs round
head screw(F)
Figure 6
Connect the door (10) with left
side panel(1) with 2pcs hinge(J)
and 8pcs flat head screw (G);
Fix knob(K) to the door(10) use
1pc long bolt(L);
The same way to assemble the
right side door(11)
Then attach 2pcs Plate(I) to Left
/right door (10)/(11) with 1pc flat
head screw(G)
Swivel top media stand
Assembly Instructions