SEI KA9463 User manual

SOUTHERN ENTERPRISES INC.
RELAX...If you can follow a few easy, step-by-step directions
in order .YOU CAN ASSEMBLE THIS ITEM.
STYLE NO. KA9463 – DISTRESSED BLACK
KA9464 – WHITE
KA9465 – DISTRESSED RED
WICKER DRAWERS SIDEBOARD
PLEASE FIND HARDWARE IN RED POLYBAG BEFORE DISCARDING PACKING MATERIAL.
HARDWARE LIST
(1) WOOD DOWEL
20PCS
(8) FLAT HEAD WOOD SCREW
Ø3X12mm
16PCS
(2) CAM-BOLT
14PCS
(9) SHORT PAN HEAD WOOD SCREW
Ø3X10mm
24PCS
(3) CAM-LOCK
14PCS
(10) HINGE 4PCS
(4) COVER
14PCS
(11) SHORT MACHINE SCREW
Ø1/4”X16mm
12PCS
(5) WOOD KNOB
2PCS
(12) LONG PAN HEAD WOOD SCREW
Ø3X12mm
4PCS
(6) LONG MACHINE SCREW
Ø5/32”X19mm
2PCS
(13) MAGNET 2PCS
(7) SHELF SUPPORT 4PCS
(14) WRENCH
1PC
PARTS LIST
(A) RIGHT SIDE PANEL
1PC
(H) RIGHT DOOR
1PC
(B) DIVIDER
1PC
(I) LEFT DOOR 1PC

(C) FIXED SHELF
2PCS
(J) WICKER DRAWER BOTTOM
3PCS
(D) LEFT SIDE PANEL
1PC
(K) WICKER DRAWER FRAME
3PCS
(E) TOP PANEL 1PC
(L) RIGHT BACK PANEL
1PC
(F) BASE 1PC
(M) MIDDLE BACK PANEL
1PC
(G) ADJUSTABLE SHELF
1PC (N) LEFT BACK PANEL
1PC
ASSEMBLY INSTRUCTION
1. SELECTASMOOTH, SOFT SURFACE TO PREVENT SCRATCHING FINISH.
2. YOU MAY NEED A PHILLIP SCREWDRIVER.
3. INSERT SHORT MACHINE SCREWS (11) THROUGH THE HOLES ON SIDE OF WICKER DRAWER
FRAME (K) AND TIGHTEN INTO CORRESPONDING HOLES ON ENDS OF WICKER DRAWER
BOTTOM (J) BY USING WRENCH (14).ASSEMBLE THE OTHER TWO DRAWERS IN SAME MANNER.
AS FIGURE 1 SHOWN.
FIGURE1 FIGURE2
C
C
A
B
1
1
1
1
1
2
2
14
11
J
K
11
11
11

4. INSERT WOOD DOWELS (1) AND CAM-BOLTS (2) INTO PREDRILLED HOLES ON INSIDE OF
DIVIDER AND RIGHT SIDE PANEL (B, A) AND FIT INTO CORRESPONDING HOLES ON ENDS OF
FIXED SHELVES (C). INSERT CAM-LOCKS (3) INTO BIG HOLES ON UNDERSIDE OF FIXED SHELVES
(C) WITH SLOT FOR SCREWDRIVER FACING OUTWARD. ROTATE CAM-LOCKS (3) CLOCKWISE TO
SECURE CAM-BOLTS (2). PUSH COVERS (4) INTO CAM-LOCKS (3). AS FIGURE 2 SHOWN.
5. INSERT WOOD DOWELS (1) AND CAM-BOLTS (2) INTO PREDRILLED HOLES ON UPSIDE OF BASE
(F), WITHANASSISTANT, INSERT WOOD DOWELS (1)AND CAM-BOLTS (2) EXTENDING FROM
BASE (F) INTO CORRESPONDING HOLES ON BOTTOM EDGES OF PARTS (A, B, D). INSERT
CAM-LOCKS (3) INTO BIG HOLES ON INSIDE OF PARTS (A, B, D) WITH SLOT FOR SCREWDRIVER
FACING OUTWARD. ROTATE CAM-LOCKS (3) CLOCKWISE TO SECURE CAM-BOLTS (2). PUSH
COVERS (4) INTO CAM-LOCKS (3).ASSEMBLE TOP PANEL (E) IN SAME MANNER. AS FIGURE 3
SHOWN.
6. INSERT LONG PAN HEAD WOOD SCREWS (12) THROUGH ENDS OF MAGNETS (13) AND TIGHTEN
INTO PREDRILLED HOLES ON UNDERSIDE OF TOP PANEL (E). FIT SHELF SUPPORTS (7) INTO
PREDRILLED HOLES ON INSIDE OF LEFT SIDE PANELAND DIVIDER (D, B), PUTADJUSTABLE
SHELF (G) ON EACH SHELF SUPPORTS (7) MATCHING THE POSITION OF GROOVES ON
ADJUSTABLE SHELF (G). AND PLACE THE WICKER DRAWERS INTO THE UNIT. AS FIGURE 4
SHOWN.
E
B
D
D
FIGURE3 FIGURE4
7. TIGHTEN LONG MACHINE SCREW (6) THROUGH PREDRILLED HOLES ON BACK OF RIGHT DOOR
(H) INTO WOOD KNOB (5). INSERT FLAT HEAD WOOD SCREWS (10) THROUGH THE HOLES OF
HINGES (8) AND TIGHTEN INTO CORRESPONDING HOLES ON RIGHT DOOR (H) AND DIVIDER (B).
ASSEMBLE LEFT DOOR (I) IN SAME MANNER.AS FIGURE 5 AND INSET SHOWN.
8. ATTACH BACK PANELS (L, M, M) INTO SLOT ON REAR EDGES OF PARTS (A, B, D, E, F). TIGHTEN
SHORT PAN HEAD WOOD SCREWS (9) THROUGH PREDRILLED HOLES ON BACK PANELS (L, M, N)
INTO PREDRILLED HOLES ON REAR EDGES OF PARTS (A, B, D, E, F). AS FIGURE 6 SHOWN.
F
E
B
FIGURE 4
G

FIGURE5 FIGURE6
READY
YOUR NEW WICKER DRAWERS SIDEBOARD IS FINISHED AND READY TO USE.
Please count, identify and compare parts and hardware list to be sure all parts are present. It may help to
divide parts and label them to correspond with part list. Extra hardware may be included. If any items are
missing, please contact our parts/service department at [phone] or in Dallas [phone]/ 9am –
4pm Mon-Fri Central time. Missing or damaged hardware and/ or parts will be replaced free of charge. WE
DO NOT SELL PARTS. WE DO NOT RECOMMEND MODIFYING PRODUCT(S) AND WE ARE NOT
RESPONSIBLE FOR ANY DAMAGES DUE TO PRODUCT MODIFICATION(S). If this product has not
been purchased from our retail affiliates (within 9 months), we are under no obligation to provide parts or
replacement merchandise. Parts will not be available for items arriving fully assembled.

"We will ship parts if available" "This is not a warranty"
PARTS REPLACEMENT FORM
STYLE NO:KA9463/KA9464/KA9465
Customer Name PARTS
LETTER PART DESCRIPTION QUANTITY NEEDED
Street, City, State, Zip
Phone#
Please indicate where you purchased this item.
Store/website/catalog
/ /
Please indicate color/size/style number
SOUTHERN ENTERPRISES INC.
P.O. Box 59996 Dallas, Texas 75229
/ /