
Figure 1
Assembly Instructions:
Unpack and lay parts on clean,
padded surface like carpet or blanket.
Check that you have all parts
indicated on the front page.
Insert 4 cs Short Bolts (1) thorough
connecting- iece on the Back Panel
(A) to attach Left Side Panel (B) &
Right Side Panel (C) to Back Panel
(A).
Insert 2 cs Long Bolts (2) through
holes on the middle-bar of Back
Panel (A) to attach Middle Divider
Panel (D) to Back Panel (A).
Figure 2
Identify both Shelf-Frames of
arts#(E)(F) first, then attach
HORIZONTAL-END-TIP
Shelf-Frame (F) to osition by
hanging its hook on the bar of Back
Panel (A), meanwhile with its
FRONT-END-TIP goes horizontally
into the holes on inner side of both
Side Panels (B)(C), and Middle
Divider Panel (D)
Attach VERTICAL-END-TIP
Shelf-Frame (E) to osition by
hanging its hook on bars of Back
Panel (A) ,meanwhile lace
FRONT-END-TIP vertically into the
small RINGS on inner side of both
Side Panels (B) (C), and Middle
Divider Panel (D).
6-DRAWER WICKER STORAGE UNIT
Assembly Instructions