Seicane S126001 Guide

www.seicane.com
Seicane S126001 2012 Geely Emgrand EC7 aftermarket car stereo
upgrade installation replacement instruction
Seicane S126001 2012 Geely Emgrand EC7 car stereo after installation
Precautions for this installation:
1.Before you start up any work park your car well and unplug the negative power cable to avoid
any danger.
2.Please make sure that all fastened wires are isolated with electrical tape.
3.Please make sure the ignition is off to avoid short circuit.
4. For your convenience here’s the recommended tools for removal and installation from
Seicane please check for more details: http://www.seicane.com/car-dvd-dismantling-device-
srd-400

www.seicane.com
2012 Geely Emgrand EC7 car stereo installation guide
1·Remove the original panel with a plastic knife pry gently along the gap and pick up the panel
then remove it and then set it aside.
2·Remove screws that fixed the radio on the dashboard.
3·Pull the factory radio out of the dash. Pull it with medium force as the wires are connected to
the radio.

www.seicane.com
4·Unplug the connectors at the back of the factory radio.
5. Make antennas and cables connected step by step and you should be very careful when you
are doing this for it will affect whole procedure.
6. Put the new Seicane car stereo into your car you should check whether your connections are
correct and you’d better have a tidy for the cables.
7· If everything is OK firm screws into their original place.

www.seicane.com
8·Firm the panel on the new Seicane car stereo. Finally the new Seicane car stereo is installed and
a comprehensive test should be conducted on the new radio.
Please note:
We suggest you arrange a professional to install it. If you have any questions about installation
please send us photos about your original car's plugs we can make a wiring diagram for your car.