Seicane S126008 Guide

www.seicane.com
Seicane S126008 Universal aftermarket car stereo upgrade
installation replacement instruction
Seicane S126008 Universal car radio after installation
Please notice some tips before the installation:
1. Please disconnect the power before the installation.
2. Please prepare a lever and a screwdriver before the removal and the installation.
3. Please keep all the separate parts from the car. Please take great care of the dashboard to
avoid scratching it d ring its detachment and installation. Please keep handy any parts from
the car and make se of all the original screws from the car as m ch as possible. so each
related part of the nit can be fixed sec rely.
4. For yo r convenience, here’s the recommended tools for removal and installation from
Seicane, please check for more details:
http://www.seicane.com/car-dvd-dismantling-device-srd-400

www.seicane.com
Universal car radio installation guide
1·Remove the original panel with a plastic knife, pry gently along the gap and pick p the panel,
then remove it and then set it aside.
2·Remove screws that fixed the radio on the dashboard.
3·P ll the factory radio o t of the dash. P ll it with medi m force, as the wires are connected to
the radio.

www.seicane.com
4·Unpl g the connectors at the back of the factory radio.
5. Make antennas and cables connected step by step, and yo sho ld be very caref l when yo
are doing this for it will affect whole proced re.
6. P t the new Seicane radio into yo r car, yo sho ld check whether yo r connections are
correct, and yo ’d better have a tidy for the cables.
7· If everything is OK, firm screws into their original place.

www.seicane.com
8·Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a
comprehensive test sho ld be cond cted on the new radio.
Please note:
We s ggest yo arrange a professional to install it. If yo have any q estions abo t installation,
please send s photos abo t yo r original car's pl gs, we can make a wiring diagram for yo r car.