Seicane S127668 Guide

www.seicane.com
Seicane S127668 2007-2011 Toyota Camry aftermarket car stereo
head unit upgrade installation replacement instruction
Seicane S127668 2007-2011 Toyota Camry car radio after installation
Before and during installation you should notice:
1.Before connecting, please ma e sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult
the professional.
7. For your convenience, here’s the recommended tools for removal and installation from
Seicane, please chec for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-
400

www.seicane.com
2007-2011 Toyota Camry car radio installation guide
1. The original car radio.
2. Unscrew the shift nob of the par ing bra e.
3. Remove two side panels.

www.seicane.com
4. Remove the bottom panels.
5. Unscrew two screws with a screwdriver.

www.seicane.com
6. Remove the glove.
7. Disconnect the connectors at the bac of the glove.
8. Remove the a/c vent with a removal tool.

www.seicane.com
9. Disconnect the connectors at the bac of the a/c vent.
10.Unscrew four screws holding the original radio in dash with a screwdriver.
11. Ta e the original car radio out of the dashboard.

www.seicane.com
12. Disconnect the connectors at the bac of the original radio.
13. Chec all the accessories for the new Seicane car radio.
14. Connect the harnesses to the bac of the new Seicane car radio.
15. Connect the Seicane car radio to your original car radio 's plugs.
16.Turn on the new Seicane radio to have a careful chec if everything wor s well. If it doesn't,
please chec whether all the cables are connected correctly.
17.Put the new Seicane radio into the dash.
18. Put everything into their original place.
Please note:
We suggest you arrange a professional to install it. If you have any questions about installation,
please send us photos about your original car's plugs, we can ma e a wiring diagram for your car.