Seicane S126011 User manual

www.seicane.com
SKU: 101525 Model:S126011
Seicane 2008-2013 SUBARU Forester Impreza car radio after installation
Tips abo t the installation:
1.Please disconnect the power before the installation.
2.Please prepare a lever and a screwdriver before the removal and the installation.
.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid
scratching it during its detachment and installation. Please keep handy any parts from the car
and make use of all the original screws from the car as much as possible. so each related part of
the unit can be fixed securely.
4. For your convenience, here’s the recommended tools for removal and installation from
Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-
srd-400

www.seicane.com
2008-2013 SUBARU Forester Impreza car radio installation g ide
1. The original car radio.
2. Pry around the trim panel with a lever.
. Remove the trim panel with your hands.

www.seicane.com
4. Unscrew four screws holding the original radio in place with a screwdriver.
5. Gently take out the original radio.
6. Disconnect all connectors at the back of the original car radio.
7. Check all the accessories for the new Seicane car radio.
8. Connect the harnesses to the back of the new Seicane car radio.
9. Connect the Seicane car radio to your original car radio 's plugs.
10. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn't,
please check whether all the cables are connected correctly.

www.seicane.com
11.Put the new Seicane radio into the dash.
12. Put everything into their original place.