SEIKAKU TECHNICAL GROUP RIO200 User manual

USER'S MANUAL
AUDIO MATRIX
RIO200
I/O Remote Module

INDEX
01 SAFETY RELATED SYMBOLS
02 WARNING
03 IMPORTANT SAFETY INSTRUCTIONS
04 FOREWORD
05 AUDIO MATRIX
06 SYSTEM PREVIEW
07 BASIC OPERATION
08 INSTALLATION
09 SOFTWARE CONTROL
10 SPECIFICATIONS
1
1
2
3
3
4
7
8
9
10
AUDIO MATRIX

1
AUDIO MATRIX

2
AUDIO MATRIX

Thanks to purchase the product of our company, please read this manual carefully before
any operation.
Note: This guide contains all the information needed for the product. There might be some
differences between the item and its description; please refer to the real product for the
features.
Audio Matrix is a system which contains multiple signal inputs and outputs; each input can
be assigned to any output like matrix in mathematics. Parameters controls are available for
all the inputs and outputs, and are easily changeable; all the configurations can be backed
up and restored, easy to copy and to extend. Audio Matrix gives the ability to build
complex audio setup in one device providing an instinctive operating interface for both
professional and beginner.
FOREWORD
AUDIO MATRIX
3
AUDIO MATRIX

SYSTEM PREVIEW
4
Audio Matrix is a system which combines the hardware with software. The core device is
Matrix A8 or Matrix D8. The major features are listed below:
1.12 INPUTS and 12 OUTPUTS
2. In case of extension links, the maximum goes up to 192 inputs and outputs.
3.Broadcast different zones simply by paging unit control.
4.A remote control unit can assign the volume in different zones separately.
5.Control signals are transferred individually with dedicated wires separated from the audio
stream, avoiding conflicts and improving the flexibility and the reliability.
6. The transmission for audio stream is based on AES/EBU protocol, while the control
signal used a RS-485 format.
There are six members in the MATRIX SYSTEM family:
MATRIX A8 --- Server host;
MATRIX D8 --- Server host (Compared to A8, 8 analog I/O for the A8, 8 digital I/O for D8);
RVC1000 --- Remote volume control with a link port;
RVA200 --- Remote volume control with additional outputs;
RIO200 --- Remote analog inputs and outputs;
RPM200 --- Remote paging station.
By using a combination of the above six devices, most of the broadcasting or routing
requirements can be fulfilled.
This system fits perfectly for schools, middle and small companies, supermarkets, bars and
restaurants, health clubs, small libraries … The friendly and quick implementation of
primary and advance parameters makes easy the design of professional as well as simple
applications.
Here are some common examples:
AUDIO MATRIX

SYSTEM PREVIEW
5
70/100V Speaker
Office
Stock Room
Fitting Room
RVA200
RETAIL STORE
RPM200
MATRIX A8
MP3/CD Player
Video Plaver
Music Server 70/100V
Sales Floor
Active Speaker
RVC1000
RIO200 RVA200
RPM200
MATRIX A8
MATRIX A8
70/100V
Aerobics
Active
Speakers Active
Speakers
Treadmill Locker Rooms
Locker Rooms
HEALTH CLUB
MP3/CD Player
MP3/CD Player
AUDIO MATRIX

MATRIX A8
Video Projector
Classroom Classroom
RIO200 RIO200
Active
Speakers
Active
Speakers
SCHOOL
SYSTEM PREVIEW
6
RESTAURANT
MP3/CD Player
Restaurant
Bar
Active
Satellite
Terrace
Cloak Room
Toilet
RVA200
RPM200
MATRIX A8
TV
4CH 70/100V
Active
Sub
Video Plaver
AUDIO MATRIX

RIO200 -- I/O Remote Module
The RIO200 is a remote input and output module
providing 2 x analog channels IN and 2 x analog
channels OUT. The device includes build in A/D
and D/A converters processing digital audio AES3
signals from and to the MATRIX-A8.
a. 2 Channel Inputs
A & B analog line Inputs assigned to channels 9/10
or 11/12 of MATRIX-A8.
b. Microphone Input
XLR connector for MIC. If connected, it replaces
the A channel input.
c. Microphone volume
Button to adjust le MIC input level.
d. Phantom power
48V switchable phantom power for electret MIC.
e. Signal indicators for the Inputs
Chanel A (MIC) and B input signal status indicators for signal presence and clip.
f. Signal indicators for the Outputs
Channel A and B input signal status indicators.
g. RD Port
Connection to MATRIX-A8. The maximum CAT 5e cable length is 100 meters.
h. 2 Channel Outputs
2 channel analog line Outputs assigned to RD port 9/10 or 11/12 of MATRIX-A8.
BASIC OPERATION
7
AUDIO MATRIX

Pass cables through inner wall rear case, insert the cable to the RJ45 port, and insert the
phoenix terminal to dedicated port; then fix panel with crews and clip the decorated frame.
INSTALLATION
8
AUDIO MATRIX

SOFTWARE CONTROL
ID modification
Right click on the “DeviceID” position, the function menu popped up as shown; click
“Change DeviceID” , then enter the number(4 bit) you wanted in the text box, finally click
OK to save and to take effect.
Note: The first time to use the whole system, initial work to assign ID for each device is
necessary for its functioning.
9
Please use high rated network cable to connect the Ethernet port of PC and the LAN port
of serve host device. Then run MatrixSystemEditor, make sure the IP is linked rightly by the
remarks given by dialogs. At the main interface, you can drag the device in the left column
to the right area, it is the operation to add a device. Please make sure the device you added
is physically linked, or there would be no effects even if all settings are saved. Double click
for specific operation, here we add a RIO200.
If the device is connected properly, the gray rectangle in the left middle would turn to green.
Device rename
Double click on the device block, and the click the “CHANGE DEVICE NAME” on the
shown dialog, another window popped up, enter the name you wanted to textbox and click
“Submit” button to save.( Please make sure the name can only consist of alphabets,
numbers and common symbols.)
AUDIO MATRIX

NF05181-1.0
SPECIFICATIONS
RIO200 -- Remote Audio I/O
Inputs
• Active Balanced
• Connectors: 3-pin female XLR, RCA
• Input Impedance: 5.1 kΩ
• THD+N: < 0.01 % typ 20-20k Hz, 0dBu
• Maximum Input: 20.0 dBu
• Frequency Response: 20Hz~20KHz,0dB±1.5dB
• Dynamic Range: -126dB max, A weighted
• Crosstalk: -87dB max, A weighted
Outputs
• Active Balanced
• Connectors: Euroblock 2 x 3-pin, 5 mm pitch
• Impedance: 240 Ohm
• Maximum Output: +20.0 dBu
• Frequency Response: 20Hz~20KHz,0dB±1.5dB
• Dynamic Range: -107dBu max, A weighted
• Crosstalk: -87dB max, A weighted
Indicators
• Signal: -30dBu Green LED, peak-reading
• Overload: +17dBu Red LED, peak-reading
Ports
• RD net to Matrix: RJ45, 100 m CAT 5e cable (150 m with ground connection)
Dimensions
• L x H x D: 147 x 86 x 47 mm
10
AUDIO MATRIX