Seiko VELATURA 7T62 User manual

INSTRUCTIONS (P. 3)
BEDIENUNGSANLEITUNG (S. 20)
INSTRUCTIONS (P. 37)
ISTRUZIONI (P. 54)
INSTRUCCIONES (P. 71)
INSTRUÇÕES (P. 88)
用法説明 (105 頁)
Cal. 7T62

2
English
You are now the proud owner of a SEIKO Analogue Quartz Watch Cal. 7T62. For best results,
please read the instructions in this booklet carefully before using your SEIKO Analogue Quartz
Watch. Please keep this manual handy for ready reference.
Sie sind jetzt Besitzer einer SEIKO Analog-Quarzuhr Kal. 7T62. Bitte lesen Sie diese Bedienungsan-
leitung vor Verwendung der Uhr sorgfältig durch und heben Sie sie gut auf.
Vous voici l’heureux propriétaire d’une montre quartz analogique SEIKO Cal. 7T62. Pour obtenir
d’excellentes performances de cet article SEIKO, veuillez lire attentivement cette brochure que
vous conserverez pour toute référence ultérieure.
Siete ora in possesso di un orologio SEIKO Analogico al Quarzo Cal. 7T62. Per ottenere i migliori
possibili risultati dal Vostro orologio, leggere attentamente le istruzioni di questo manuale prima
di utilizzare il Vostro orologio SEIKO analogico al quarzo. Conservare poi il manuale stesso per
ogni qualsiasi eventuale futuro riferimento.
Enhorabuena por su adquisición de un reloj SEIKO analógico de cuarzo Cal. 7T62. Para óptimo
resultado, lea detenidamente las instrucciones de este folleto antes de usar el reloj. Guarde este
manual para consulta posterior.
Você pode sentir-se orgulhoso de possuir um Relógio SEIKO Quartz Análogo Cal. 7T62. Para obter
os melhores resultados, leia atentamente as instruções contidas neste opúsculo antes de usar o
seu Relógio SEIKO Quartz Análogo. Queira conservar este manual para referências futuras.

3
English
ENGLISH
CONTENTS
Page
SETTING THE TIME AND ADJUSTING THE STOPWATCH HAND POSITION ........ 5
SETTING THE DATE ................................................................................................ 9
STOPWATCH ........................................................................................................... 10
SINGLE-TIME ALARM ............................................................................................. 12
TACHYMETER ......................................................................................................... 15
BATTERY CHANGE .................................................................................................. 17
SPECIFICATIONS ..................................................................................................... 19
✩
For the care of your watch, see “TO PRESERVE THE QUALITY OF YOUR
WATCH” in the attached Worldwide Guarantee and Instruction Booklet.

4
English
CAL. 7T62
6
A
B
a b c
CROWN
Hour hand
Minute hand
STOPWATCH 1/5-second handSTOPWATCH minute hand
■TIME/CALENDAR
■SINGLE-TIME ALARM
Can be set to ring only once at a
designated time within the coming 12
hours.
■STOPWATCH
Measures up to 60 minutes in 1/5 second
increments.
Split time measurement is possible.
ALARM minute hand
Small second hand
Date
a: Normal position
b: First click
c: Second click
ALARM hour hand

5
English
SETTING THE TIME AND
ADJUSTING THE STOPWATCH HAND POSITION
6
Minute hand
Hour hand
CROWN Pull out to second click when the second hand is at the 12 o’clock position.
CROWN Turn to set the hour and
minute hands.
Small
second
hand
1. MAIN TIME SETTING
●This watch is so designed that the following are all made with the crown at the second click
position:
1) main time setting
2) alarm hand adjustment
3) stopwatch hand position adjustment
Once the crown is pulled out to the second click, be sure to check and adjust 1) and 2) at the
same time. If needed, 3) should also be adjusted then.

6
English
6
1. When the stopwatch is or has been measuring, if the crown is pulled out to the second click, it will
automatically reset the STOPWATCH hands to “0”.
2. If the alarm has been set and the crown is pulled out to the second click, the ALARM hands will turn
to indicate the current time.
3. It is recommended that the hands be set to the time a few minutes ahead of the current time, taking
into consideration the time required to set the ALARM hands and to adjust the STOPWATCH hand
position if necessary.
4. When setting the hour hand, be sure to check that AM/PM is correctly set. The watch is so designed
that the date changes once in 24 hours.
5. When setting the minute hand, first advance it 4 to 5 minutes ahead of the desired time and then turn
it back to the exact minute.
2. ALARM HAND ADJUSTMENT
Hour hand Minute hand
B
ALARM
hour hand ALARM minute hand
BPress repeatedly to set ALARM
hands to the time indicated by the
main time hands.
✩Set the ALARM hands to the time the main
time hands indicate.
* The ALARM hands move quickly if
button B is kept pressed.

7
English
3. STOPWATCH HAND POSITION ADJUSTMENT
6
STOPWATCH
minute hand
B
▼
▼
APress for 2 seconds.
* STOPWATCH minute hand turns a full circle.
Press repeatedly to set STOPWATCH
minute hand to the “0” position.
APress for 2 seconds.
BPress repeatedly to set STOPWATCH
1/5-second hand to the “0” position.
▼
STOPWATCH
1/5-second hand
A
B
* STOPWATCH 1/5-second hand turns a full
circle.
▼
✩If the STOPWATCH hands are not in the “0”
position, follow the procedure below to set them
to the “0” position.
* The hand moves quickly if button B is kept
pressed.
* The hand moves quickly if button B is kept
pressed.

8
English
▼
▼
●ALARM and STOPWATCH hands can be readjusted in the following order by
pressing button for 2 seconds.
A
STOPWATCH
minute hand
▲
STOPWATCH
1/5-second hand
▲
ALARM hands
* ALARM hands
advance 12 hours. * STOPWATCH minute
hand turns a full circle. * STOPWATCH 1/5- second hand turns a
full circle.
▲
CROWN Push back in to normal position in
accordance with a time signal.
* After all the adjustments are completed,
check that the main time and alarm hands
indicate the same time.

9
English
SETTING THE DATE
●Before setting the date, be sure to set the main time.
6
➠
➠
CROWN
Pull out to first click.
▼
Turn clockwise until the desired date
appears.
▼
Push back in to normal position.
Date
1. It is necessary to adjust the date at the end of February and 30-day months.
2. Do not set the date between 9:00 p.m. and 1:00 a.m. Otherwise, the date may not change properly.
3. Do not press button B when the crown is at the first click position, as this will move the ALARM hands.

10
English
STOPWATCH
●The stopwatch can measure up to 60 minutes in 1/5-second increments.
●After 60 minutes, it will start counting again from “0” repeatedly up to 12 hours.
6
A
B
✩Before using the stopwatch, be sure to check that the crown is set at the normal
position and that the STOPWATCH hands are reset to the “0” position.
Standard measurement
A A B
▼
▼
START STOP RESET
STOPWATCH minute hand
STOPWATCH
1/5-second hand
* If the STOPWATCH hands do not return to the “0” position when the stopwatch is reset to “0”, follow the
procedure in “SETTING THE TIME AND ADJUSTING THE STOPWATCH HAND POSITION”.