Sencor SCP 2271WH Operation instructions

- 1 - 09/2019 Copyright © 2019, Fast ČR, a.s.
EN Electric Double Hotplate
Translation of the original manual
SCP 2271WH

- 2 - 09/2019 Copyright © 2019, Fast ČR, a.s.
1
2
A
7
3
4
5
6

- 3 - 09/2019 Copyright © 2019, Fast ČR, a.s.
EN Electric Double Hotplate
User'smanual
IMPORTANT SAFETY INSTRUCTIONS
READ CAREFULLY AND STORE FOR FUTURE USE.
■This appliance may be used by children 8years of age and older and by
persons with physical or mental impairments or by inexperienced persons,
if they are properly supervised or have been informed about how to use the
product in asafe manner and understand the potential dangers. Cleaning
and user maintenance must not be performed by children unless they are
older than 8 years of age and under supervision. Keep this appliance and
the power cord out of reach of children that are younger than 8years of age.
■Children must not play with the appliance.
■ This appliance is designed for household use only. It is not intended for
use in locations such as:
- staff kitchens in stores, offices and other workplaces;
- agricultural farms;
- hotel or motel rooms and other living areas;
- bed and breakfast establishments.
■Do not use the appliance outdoors or in an industrial environment.
■Never use the appliance for any other purposes than those for which it is
intended.
■ Before connecting the appliance to apower socket, check that the nominal
voltage on its rating label matches the voltage in the power socket to which
you wish to connect it. Connect the appliance only to aproperly grounded
socket. Do not use an extension cord. Fully unwind the power cord before
use.
Attention:
This appliance is not intended to be operated using an external
timer switch or remote control.
■ Only use the appliance on ahorizontal, dry, clean, stable and heat resistant
surface. Do not use the appliance on the drip area of the kitchen sink.
■Do not place the appliance on the edge of atable or on an electric or gas
stove or in their vicinity.

- 4 - 09/2019 Copyright © 2019, Fast ČR, a.s.
■ Do not use the appliance on asurface that is sensitive to heat or that is
covered by atable cloth, paper or other flammable material, in the vicinity
of curtains and other flammable materials or materials sensitive to heat.
■ During operation there needs to be sufficient area for air circulation above
the appliance and around it. Asafety clearance of at least 50cm must be
maintained, in the direction of the main radiant heat, from the surface of
flammable materials located above the hotplate, and at least 20cm in all
other directions around the appliance.
■ While in operation, the appliance must be located on akitchen countertop
with no cupboard above it.
■Do not place any items on to the appliance.
■Do not cover the appliance or block its vents. The lid of the appliance may
only be closed when the appliance is disconnected from the power socket
and has cooled down completely.
This label located on the appliance means:
ATTENTION: Hot surface
These surfaces may become hot during use.
■The temperature of accessible surfaces on the appliance is high when the
appliance is in operation and, due to residual heat, for acertain time after
operation. Do not touch the hot surface of the appliance. There is adanger
of burns.
■When the appliance is in operation, the temperature of adjacent surfaces
may be higher.
■ Do not use the appliance without apot or pan placed on the hotplate.
Regularly check the condition of the food while the hotplate is running.
■Only use pots and pans intended for cooking.
■Always make sure that the pot or pan is correctly placed on the hotplate.
The handle of the cookware must be in asafe position so as to prevent
brushing against it and overturning the cookware.
■ Be very careful when cooking with oil or shortening. Shortening or oil
heated to ahigh temperature may ignite.
■ When handling hot cookware, which contains hot food or liquids, be
especially careful so as not to burn or scald yourself.
■When handling hot cookware, use kitchen gloves.
■The appliance must not be left without supervision when in operation or
when connected to apower socket.

- 5 - 09/2019 Copyright © 2019, Fast ČR, a.s.
■Always check that both the temperature control knobs are set to position
MIN before connecting the appliance to apower socket. Always after
finishing using the appliance, set both the temperature control knobs to
position MIN and disconnect the power cord from the power socket. Keep
in mind that the hotplates will emit residual heat for acertain time after they
are used. Be especially careful not to touch the hot surface of the appliance.
Warning:
In the event that the surface of the hotplate is cracked, immediately
turn the appliance off and disconnect it from the power socket to
prevent possible injury by electrical shock. Never use the appliance
with acracked hotplate or if it is damaged in any other way. Hand
the appliance over to an authorised service centre for repair.
■ Always set both the temperature control knobs to position MIN and
disconnect the power cord from the power socket when leaving the
appliance without supervision, when not using it and before cleaning,
maintenance, moving or storing it. Never move the appliance during
operation.
■ Allow the appliance to fully cool down before moving, cleaning, maintenance
or storing it. Never move the appliance when there is apot or pan on it or
unless it has cooled down completely.
■ Regularly clean the appliance after each use according to the instructions in
the chapter Cleaning and maintenance. Do not perform any maintenance
on the appliance except for cleaning as described in this user’smanual.
■ To prevent the risk of injury by electrical shock, do not submerge the
appliance, power cord or power plug into water or another liquid.
■Do not place heavy items on the power cord. Make sure the power cord
does not hang over the edge of atable, that it is not touching ahot surface
or sharp objects.
■ Disconnect the appliance from the power socket by gently pulling the
plug of the power cord, and not the power cord itself. Otherwise, this could
damage the power cord or the socket.
■ If the power cord is damaged, it must be replaced by the manufacturer,
its service technician or by asimilarly qualified person, as this will prevent
adangerous situation from arising.

- 6 - 09/2019 Copyright © 2019, Fast ČR, a.s.
■ Do not use the appliance when it is not functioning correctly or after it has fallen
on the floor, been submerged in water or is damaged in any other way. Hand it
over to an authorised service centre for inspection or repair.
■In order to prevent ahazardous situation arising, do not repair the appliance
yourself or modify it in any way. Have all repairs performed at an authorised
service centre. By tampering with the appliance, you risk voiding your legal
rights arising from unsatisfactory performance or quality warranty.

- 7 - 09/2019 Copyright © 2019, Fast ČR, a.s.
■ Prior to using this appliance, please read the user’smanual thoroughly, even in cases,
when one has already familiarised themselves with previous use of similar types of
appliances. Only use the appliance in the manner described in this user’smanual. Keep
this user’smanual in asafe place where it can be easily retrieved for future reference.
■ We recommend saving the original cardboard box, packaging material, purchase
receipt and responsibility statement of the vendor or warranty card for at least the
duration of the legal liability for unsatisfactory performance or quality. In the event
of transportation, we recommend that you pack the appliance in the original box
from the manufacturer.
DESCRIPTION OF THE APPLIANCE
A1 Large hotplate, diameter 18 cm
A2 Indicator light
signals operation of large hotplate.
A3 Temperature control knob
serves to control the large hotplate.
A4 Small hotplate, diameter 15 cm
A5 Indicator light
signals operation of small hotplate.
A6 Temperature control knob
serves to control the small hotplate.
A7 Lid
BEFORE FIRST USE
■ Remove all packaging materials, including promotional tags and labels from the
appliance.
■ Wipe the surface of the appliance with aclean, lightly dampened cloth. Then wipe
it dry.
OPERATING THE APPLIANCE
■ Place the appliance on akitchen countertop or on atable within reach of apower
socket. At the same time, make sure that all safety instructions are followed.
■ Open the lid A7.
■ Make sure that the temperature control knob A3 and A6 is set to position MIN and
that there are no foreign objects are located on the hotplate A1 and A4 and that
its surface is clean.
■ Fully unwind the power cord and connect it to apower socket. Since the appliance
heats up during operation, the power cord must be located in such away that it is
not touching the surface of the appliance.
■ Place apot or pan on the appropriate hotplate.To achieve optimal power consumption
and cooking time, use cookware with aflat base, the diameter of which corresponds
to the size of the hotplate. Place foodstuffs into the pot or pan.
■ Set the required temperature level using the appropriate temperature control knob.
For quickly bringing the contents to aboil, use the highest level MAX, for frying we
recommend setting level 5, for maintaining aboil, set the medium levels 3 to 4 and for
keeping food warm, use the low levels 1 to 2.The temperature level can be changed
at any time during operation as required. During operation the thermostat switches
the hotplate on and off to maintain the set temperature. The indicator light A2 and
A5 signals the thermostat switching on and off.
■ Regularly check the condition of the food while the hotplate is running. Do not leave
the appliance without supervision when it is in operation.
Note:
When first turned on, asmall amount of smoke may be emitted. This
is an entirely normal event, which will disappear after afew minutes.
■ When the meal is finished, set the appropriate temperature control knob to position
MIN and disconnect the power cord from the power socket.
■
Always after finishing using the appliance, make sure that both the temperature
control knobs A3 and A6 are set to position MIN and that the power cord is
disconnected from the power socket.
■ Allow the appliance to fully cool down and then clean it according to the instructions
in chapter Cleaning and maintenance. Keep in mind that the appliance will emit
residual heat for acertain time after it is used. Do not touch the hot surface. There is
adanger of burns. Never move the appliance unless it has cooled down completely.
CLEANING AND MAINTENANCE
■ Clean the appliance after every use. Makes sure that dried on food or other residues
do not accumulate on it. Before cleaning it, always set the temperature control knob
A3 and A6 to position MIN, disconnect the power cord from the power socket and
allow the appliance to cool down completely.
■ To clean the hotplate A1 and A4, use asoft, lightly dampened textile.Then wipe the
hotplate A1 and A4 dry.
■ To clean the surface around the hotplates A1 and A4 use asoft, lightly dampened
textile. In the event of greater soiling, use asmall amount of neutral kitchen detergent.
Remove any remaining detergent using aclean, lightly dampened cloth. Then
thoroughly wipe the cleaned surface until dry.
■ Do not use steel wool, solvents, cleaning products with an abrasive effect, etc. to
clean the appliance. Otherwise the surface coat of the appliance may be damaged.
■ To prevent the risk of injury by electrical shock, do not submerge the appliance, power
cord or power plug into water or another liquid.
■ Discolouration of the surface of the appliance may occur after acertain period of
use. However, this does not have any effect on the functionality of the appliance.
STORAGE
■ Place the cooled and thoroughly cleaned appliance in aclean, dry place out of
children’sreach.
TECHNICAL SPECIFICATIONS
Rated voltage range............................................................................................................ 220−240 V
Rated frequency........................................................................................................................50/60 Hz
Rated power input....................................................................................................... 2 100–2 500 W
Changes to text and technical parameters are reserved.
INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF
USED PACKAGING MATERIALS
Dispose of used packaging material at asite designated for waste in your municipality.
DISPOSAL OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT
This symbol on products or original documents means that used electric
or electronic products must not be added to ordinary municipal waste.
For proper disposal, renewal and recycling hand over these appliances
to determined collection points. Alternatively, in some European Union
states or other European countries you may return your appliances to
the local retailer when buying an equivalent new appliance.
Correct disposal of this product helps save valuable natural resources
and prevents potential negative effects on the environment and human
health, which could result from improper waste disposal. Ask your local authorities or
collection facility for more details.
In accordance with national regulations penalties may be imposed for the incorrect
disposal of this type of waste.
For business entities in European Union states
If you want to dispose of electric or electronic appliances, ask your retailer or supplier
for the necessary information.
Disposal in other countries outside the European Union.
This symbol is valid in the European Union. If you wish to dispose of this product,
request the necessary information about the correct disposal method from the local
council or from your retailer.
This product meets all the basic requirements of EU directives related to
it.