Sencor SHP 90 User manual

Hair clipper
User's manual
SENCOR
Before first use, please read all instructions contained in this user manual carefully,
even if you are already familiar with the use of similar products. Only use this
product in accordance with the instructions described in the user manual. Keep
the user manual in a safe place for future use.
Keep the original packaging, including the internal packing material, warranty
card and proof of purchase receipt, at least for the duration of the warranty. If you
need to ship this product, pack it in the original cardboard box to ensure maximum
protection during shipping or transport (e.g., when moving or when you need to
send this product for repair).
EN-1
Copyright © 2012, Fast ČR, a.s. Revision 06/2012

Hair clipper
SHP 90
CONTENTS
IMPORTANT SAFETY NOȚICE sisciwssctirapstivticideescasin seme cmrnavachiqniedaaneimagtimenennane 3
PRODUCT DESCRIPTION HE 4
INSTRUCTIONS FOR EE 5 -6
CLEANING AND MAINTENANCE ua 6
DISPOSAL OF USED. BAT TEE tege eer 7
TECHNICAL et e an Té KE 7
DISPOSAL OF USED ELECTRICAL AND ELECTRONIC APPLIANCES.. ue 8
INSTRUCTIONS AND INFORMATION REGARDING
THE DISPOSAL OF USED PACKAGING MATERIALS ........ ccs senses ieee eeseeeeenenne 8
EN-2
Copyright © 2012, Fast CR, a.s. Revision 06/2012

Hair clipper
SHP 90
IMPORTANT SAFETY NOTICE
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
14)
15)
16)
17)
18)
19)
This product must not be used by persons (including children) with physical
or mental impairments or by inexperienced persons, unless properly trained
or schooled in the safe use of the product, or unless they have been properly
supervised by a qualified person who will be responsible for their safety.
Children must be supervised to ensure that they do not play with the product.
Never use accessories that have not been delivered with this product or are
not intended for it.
Under no circumstances should you try to repair or amend the product on
your own - danger of electric shock! Entrust all repairs and adjustments to
a specialised company/service. Failure to do so will void the warranty.
Never use the product if you have wet hands or feet.
Keep and store the product away from flammable or volatile substances.
Keep the product away from extreme temperatures, direct sunlight and exces-
sive humidity. Do not use in a dusty environment.
Do not place the product near heaters, open fires or other appliances or
equipment that are sources of heat.
This product is designed for household use. Do not use in industrial surround-
ings or outdoors!
Never use this product on animals.
Do not use the product for purposes other than those intended.
Do not spray the product with water or any other liquid. Do not pour water
or any other liquids into the product. Do not submerge the product in water
or in any other liquid.
Never use the product near a bathtub, wash basin or any other container filled
with water.
Use extra care if the product is used near children. Always keep the product
away from the reach of children.
Do not use this product on open wounds, cuts, sunburns or blisters.
Keep this product at a safe distance from hair and eyes.
If you will not be using the product for an extended period of time, remove the
batteries. Otherwise they may leak inside the product and cause irreparable
damage.
For plugging the product into the mains socket, use only the type of adaptor
included with the product. Never use a different type of adapter with the
product
The manufacturer takes no responsibility for damages caused by incorrect use
of the product and its accessories
EN-3
Copyright © 2012, Fast ČR, a.s. Revision 06/2012

Hair clipper
SHP 90
PRODUCT DESCRIPTION
Attachment
Comb attachment for cutting hair
Comb attachment for 25/30 mm | around the ears
setting cutting length
Stainless cutting
Side flap
for removing
the attachment Comb attachment
from the body 15/20 mm
of the clipper
Power adapter:
Power Adapter Comb attachment Comb attachment
Connector 9/12 mm 3/6 mm
Copyright © 2012, Fast CR, a.s. Revision 06/2012

Hair clipper
SHP 90
HAIR CLIPPER INSTRUCTIONS
The hair clipper can be used either cordless or can be powered from the mains.
Using the power adapter:
If you want to use the hair clipper immediately, connect the power adapter and
plug the adapter into a suitable power outlet (230 V).
Recharging batteries:
Before first use and also for all future recharging, the device should be recharged for
a time of 12 hours.
Insert the power adapter connector into the jack on the underside of the hair clip-
per and then insert the power adapter into a 230V power outlet. The recharging
process is indicated by a small red recharging indicator. When fully charged, the
clipper may be used for approximately 45 minutes.
-Öz Tip:
'` To ensure a long battery life, you should fully discharge the batteries before
recharging. Discharge the battery by using the device until it stops working.
Operation
Before using the hair clipper:
The hair to be cut should be clean and dry or wet. Hair should be thoroughly
combed and without knots. Put a towel around your neck so that cut hair does
not fall behind your collar.
Using the hair clipper:
1) Select one of four comb attachments to select the length of the cut. The
comb attachments are available in lengths of 3/6 mm, 9/12 mm, 15/20 mm
and 25/30 mm.
2) You may also use a special slanted attachment for cutting hair around the
ears or aso called shearing attachment. Using the shearing attachment you
may reduce the volume of hair without changing their length.
3) Click in the comb attachment into the side lugs in the upper part of the hair
clipper with the required cut length in the upward direction. The length of
the cut is always imprinted on the inner side of the attachment.
4) Before commencing to cut, ensure that the attachment is firmly attached to
the body of the clipper.
5) Turn onthe ON/OFF switch and commence to cut.
6) After you have finished cutting, turn off the clipper with the ON/OFF switch
on the body of the clipper and by unfastening one of the side sections of
the comb attachment you can remove the attachment from the body of the
clipper.
EN-5
Copyright © 2012, Fast ČR, a.s. Revision 06/2012

Hair clipper
SHP 90
-©- Tip:
“'* We recommend not to initially cut your hair or beard too short.
CLEANING AND MAINTENANCE
It is best to clean the cutting unit and the comb attachments after each cutting, so
as to avoid its excessive fouling with hair and whiskers.
Cleaning the body of the clipper:
You can clean the body of the hair clipper using a lukewarm moist cloth. Do not
use harsh cleaning fluids, paint thinners or solvents. These can damage the surface
of the appliance.
Caution:
ei Do not submerge the body of the hair clipper under water because it contains
parts under live current (recharging battery)!
Cleaning of the cutting head:
1) Turn off the clipper and if the power adapter is connected remove it from the
power outlet and from the clipper.
2) Remove the comb attachment from the device. Using your thumb push the
cutting unit back and pull it out.
3) Using the cleaning brush supplied, remove the remaining hairs from the cutting
head.
4) After the cutting unit is fully cleaned, insert it back into the device by placing
the bottom lug on the cutting head into the bottom opening in the upper part
of the hair clipper body, then firmly press on the cutting head until you hear
a click.
Lubricating the head:
1) Remove the comb attachment from the device. Using your thumb push the
cutting unit back and pull it out.
2) Place one or two drops of the supplied oil in between the cutting blades and
spread it evenly. After using up the supplied oil use only oil not containing acids
(e.g. oil for sewing machines).
3) Wipe off excess oil using a cloth.
4) Then insert the cutting head back into the device by placing the bottom lug
on the cutting head into the bottom opening in the upper part of the hair
clipper body, then firmly press on the cutting head until you hear a click.
Copyright © 2012, Fast CR, a.s. Revision 06/2012

Hair clipper
SHP 90
DISPOSAL OF USED BATTERIES
Rechargeable batteries are included with this product. Used batteries do not belong
in domestic waste.
Dispose of batteries at designated battery disposal points.
TECHNICAL SPECIFICATIONS
Power adapter:
Body of the clipper
Batteries anne ea a aiei ëele 2xAA Ni-MH, 600 mAh (integrated)
Operating time per charging .........::cccccceeeeeneeeeeeeeeeeeeeeeeeeeeeecceeeeeeeeeeeeaaees 45 minutes
Protection category (relating to protection against injury by electric shock)........ II
Noise level eee a ee mC Pe EE 60 dB(A)
The declared noise emission level for this appliance is 60 dB(A), which represents
level A of the acoustic power relative to the reference acoustic power of 1 pW.
Supplied contents
1) Hair clipper
2) Power adapter:
3) 4Comb attachments
4) 1right/left attachment for cutting around the ears
5) Shearing attachment
6) Cleaning brush
7) Oil for cutting unit
8) User's manual
9) Guarantee
Text and technical parameter changes reserved.
EN-7
Copyright © 2012, Fast CR, a.s. Revision 06/2012

Hair clipper
SHP 90
DISPOSAL OF USED ELECTRICAL & ELECTRONIC EQUIPMENT
The meaning of the symbol on the product, its accessory or packaging
X indicates that this product shall not be treated as household waste. Please,
dispose of this equipment at your applicable collection point for the re-
cycling of electrical & electronic equipments waste. In the European Union
and Other European countries which there are separate collection systems for
used electrical and electronic product. By ensuring the correct disposal of this
product, you will help prevent potentially hazardous to the environment and to
human health, which could otherwise be caused by unsuitable waste handling
of this product. The recycling of materials will help conserve natural resources.
Please do not therefore dispose of your old electrical and electronic equipment
with your household waste. For more detailed information about recycling of
this product, please contact your local city office, your household waste disposal
service or the shop where you purchased the product.
INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL
OF USED PACKAGING MATERIALS
Discard the used packaging material at a site designated for waste in your locale.
This device conforms with EU rules and regulations regarding electro-
magnetic and electrical safety.
Copyright © 2012, Fast ČR, a.s. Revision 06/2012