
- 4 - 04/2023
2023, .
• Thank you for purchasing a SENCOR brand product and we hope that
you will be happy with it.
• Prior to using this appliance, please read the user's manual
thoroughly, even in cases, when one has already familiarised
themselves with previous use of similar types of appliances. Only use
the appliance in the manner described in this user’s manual. Keep this
user's manual in a safe place where it can be easily retrieved for future
use. In the event that you hand this appliance over to somebody else,
make sure to also include this user's manual.
• Carefully unpack the appliance and take care not to throw away any
part of the packaging before you find all its parts. We recommend
saving the original cardboard box, packaging material, purchase
receipt and responsibility statement of the vendor or warranty card for
at least the duration of the legal liability for unsatisfactory performance
or quality. In the event of transportation, we recommend that you pack
the appliance in the original box from the manufacturer.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DESCRIPTION OF THE APPLIANCE
A1 Lid
A2 Water level mark for easily
checking the water level
A3 Handle
A4 On/Off switch
A5 Swivel base stand with a
central connector and power
cord
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BEFORE FIRST USE
• Remove all wrapping material from the electric kettle and its base
stand.
• Fill the kettle with clean water up to the maximum water mark. Boil the
water and empty the contents of the kettle. Repeat this process 2 to
3 times. To boil water, proceed according to the instructions in chapter
Operation.
• Clean the outer surface of the kettle, the base stand and the power
cord only using a dry wiping cloth. Do not submerge any of these
parts in water, do not clean them under running water or place them
in a dishwasher.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
OPERATION
• Set the required power cord length and push it into the groove in the
base stand. Place the base stand on a stable, even and clean surface.
Connect the power cord plug to a power socket.
• Open the lid by pressing the button on the lid and fill the kettle with
the required amount of water. The water level must reach at least the
minimum mark but must not exceed the maximum mark. After filling
the kettle, properly close the lid.
Attention:
Never fill the kettle when it is placed on the base
stand.
• Place the kettle on the base stand. Insert the power plug into a power
socket and push down the On/Off switch to the ON position to start
the kettle. The backlight of the switch will be lit.
Attention:
The electric kettle is intended only for heating water.
Never heat any other liquids or substance in it.
Never start the kettle empty without water.
Incorrect use may negatively affect its lifetime. If
you accidentally turn on the kettle without water, it
will automatically turn off after reaching a certain
temperature. The kettle can be used again, once the
heating bottom has cooled down.
• When the water starts to boil, the kettle will turn off automatically and
the backlight will turn off.
Note:
You can pause the water heating process at any time by
setting the ON/OFF switch to the OFF position.
• Pour the boiled or heated water into a prepared container, cup or
mug. Make sure that the kettle remains in a vertical position when it is
carried, particularly if it is filled all the way up to the maximum mark.
• If you wish to refill the kettle, be especially careful when opening the
lid to avoid scalding by the escaping steam.
• When you have finished using it, disconnect the power cord from the
power socket. Empty the kettle and allow it to cool down.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PROTECTION AGAINST BOILING WITHOUT WATER
• If you accidentally turn on the kettle without water, the thermostat
will, after reaching a certain temperature, interrupt the electric circuit.
The ON/OFF switch will return to the raised "OFF" position and the
backlight will turn off. The kettle can be used again after several
minutes, once the heating bottom has cooled down.
Attention:
Even though the kettle is equipped with protection
against boiling without water, do not turn it on when
empty. The incorrect use of the kettle may negatively
affect its working order and lifetime.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CLEANING AND MAINTENANCE
Warning:
Prior to any cleaning or maintenance, always
disconnect the base stand from the power socket and
allow the kettle to cool down.
NEVER wash the kettle, its base stand or power cord
under running water and do not submerge them in
water or another liquid.
Do not use solvents, abrasive cleaning products,
etc. for cleaning the electric kettle or its base stand.
Otherwise, its surface may be damaged.
• To clean the external parts of the kettle, use a dry cloth or a cloth
dipped in a weak solution of neutral kitchen detergent. After washing it,
wipe the surface with a lightly damp cloth and then wipe dry.
• Wipe the internal parts of the kettle using a soft sponge or clean
cloth dipped in clean warm water. Do not use detergents or any other
chemical agents on the internal parts. After cleaning the kettle, rinse it
out several times with clean water.
• To clean the base stand, use only a dry cloth.
EN Electric kettle
User's manual