Sengled element Z01-hub User manual

Connect Element hub to any LAN port on the Wi-Fi
router via the ethernet cable provided in the package.
Then provide power to the hub.
Connect your mobile app to the Wi-Fi provided by
the same Wi-Fi router in Step 1. Download and install
Element App on your iOS or Android mobile device.
LAN
Login
sengled element
LED + Smart Control
Quick Start Guide
Internet

Turn off the wall switch, twist Element bulb into the
socket, then turn on the wall switch to power the
bulb.
Open the Element App and follow the in-App instructions
to create an account, add bulbs and configure their
settings.
Login
3
4
LAN
Devices
Add a bulb
Add a Hub

Once Element bulbs are successfully connected in
the App, the ethernet cable connecting the hub to
the router can be removed. The bulbs can now be
controlled by the App. Note: Keep the wall switch
on to provide constant power to the bulbs.
5
Internet

Element User Menu
Parameter
Z01-hub
100-240V
30mA , 2W(rate)
User Operation Instructor
ⅠSoftware download way
Step1: Log in https://appdownload.cloud.sengled.com:8099/
Step2: you can see the android and IOS APP download address. Then click
the download button for setup .
ⅡEquipment installation method
Tighten the Element bulb clockwise on the bulbholder and light to electricity.
Power on the Element hub and connect the hub to your home network
cable.To ensure that the state of thehub is right，Please long press the reset
button on the hub over 7 seconds. Quickly power on and off the bulb10 times
to make sure it is reset factory settings.The bulbwill flashes 3times if it was
factory mode.
ⅢApp Operation Method
1. Open the App, named Element . The logo is as this , .
2. Log in sengledaccount . If you haven’t the cloud account, you can register
one or continue without login(as the PIC 3.2.1).
3. If you don’t log in with a account, you can only use element local features.
PIC 3.2.1

4. When log in successfully, we can see the main menu (as PIC3.5.1). Click
“Devices”to open the devices page and you can add new hub and the new
bulbs follow the Interface prompt.(3.3.1)
You should add hub first, and then add bulbs to the hub.
PIC3.3.1
5. Add a new hub
Devices interface -----click the top-right “+”icon--click “Add a Hub”
and follow the guidance to connect the hub with your router .
The setting steps are as below：
（1）Insure the hub is power on and connect to your router with an
Ethernet cable；（ PIC3.4.1）
（2）Click the next make sure your phone’s WIFI connect to the same
router---click the next(as PIC3.4.2). enter the password of your
router.(as PIC3.4.3)
（3）After about 20 seconds, we will do this work and we can add bulbs
now!
(as PIC3.4.4 and PIC3.4.5)

PIC3.4.1 PIC3.4.2

PIC3.4.3 PIC3.4.4
PIC3.4.5 PIC3.4.6
6. Add a new bulbs
Devices interface -----click the top-right “+”icon--click “Add a Bulb”
and follow the guidanceto connect the bulb to your hub.
The setting steps are as below：
(1)Select the hub you added before；（ PIC3.4.6）
(2)Scan the QR code of every bulb which you want to add (as
PIC3.4.7).
The QR code is on your bulb like the PIC 3.4.8.
(3) If you done step2, you will find the QR code on you App just like
PIC3.4.9
(4) Click “Configure Bulb” to connect your new bulbs to the hub you
added before to make sure they work together.

PIC3.4.7 PIC3.4.8
PIC3.4.9 PIC3.4.10

7. Operation introduce
The functions of Element app as below PIC 3.5.1 showed:
●Main show yours bulbs . You can control them together with the All
page or single control with Individuals page. You can turn on or off your
bulbs or change the brightness and color temperature. (PIC3.5.2 and
3.5.3)
●Devices showed all your devices including all your hubs and its
bulbs. You remove manage them in here.
●Scenesyou can add your favorite scenes as the way you use all your
bulbs. Then you can quickly make them effect by only click one button.
●Scheduleyou can add an alarm here to make the scene effect at the
special time you wanted.
●Account you can manage your account information.
●About show the information about software version and the
firmware version of hubs and bulbs. You can update the firmware here.
PIC3.5.1
7.1Main
“Main” is about light control and so on. It will show all of theelementlight as two

way: All or Individuals (such as PIC 3.5.2 and PIC3.5.3).
PIC3.5.2 PIC3.5.3
You can control all your bulbs together in the “All” page, including turn on and off
the bulbs or change their brightness or color temperature if you want.
The button on the top right corner, you can click it to show the performance
information of all bulbs daily or weekly or monthly.(PIC3.5.4 and PIC3.5.5)