Sennheiser px-200 ii User manual

rMade for
~ iPod C iPhone 0 iPad
"Made for iPod", "Made for iPhone" and "Made for iPad" mean
that an electronic accessory has been designed to connect
specifically to iPod, iPhone, or iPad, respectively, and has been
certified by the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its
compliance with safety and regulatory standards.
iPhone and iPod are trademarks ofApple Inc., registered in the U.S.
and other countries. iPad is atrademark of Appre Inc.
"Made for iPod", "Made for iPhone" und "Made for iPad
ll
bedeuten, dass ein elektronisches Zusatzgerat speziell fUr den
Anschluss an den iPod, das iPhone bzw. das iPad konstruiert ist
und vorn Entwickler dahingehend zertifiziert wurde, dass es den
Apple-Leistungsnorrnen entspricht. Apple Ubernimmt keine
Gewahr im Hinblick auf die Verwendbarkeit dieses Gerates oder
dessen Konformitat mit den Standards fUr Sicherheit und
Funkentstorung.
iPod und iPhone sind in den USA und anderen Landern eingetrage-
ne Marken von Apple Inc. iPad ist eine Marke von Apple Inc.
"Made for iPod", "Made for iPhone et "Made for iPad" signifient
qU'un accessoire electronique aete developpe specifiquement
pour l'iPod, l'iPhone, ou l'iPad et que son developpeur certifie qU'il
repond aux normes de performance Apple. Apple n'est pas
resRonsable du fonctionnement de cet accessoire ni de sa
conformite aux normes reglementaires et de securite.
iPod et iPhone sont des marques deposees d'Apple Inc.,
enregistrees aux Etats-Unis et dans d'autres pays. iPad est une
marque d'Apple Inc.

• Co ei9t e ote con rol
: a at over eicraphone
A' 'n9 he vo
Press the +or -button.
Co rol i9 u io nc ions
Press the rbutton
once: Play/pause atrack
twice:
Play next track
3times:
Play previous track
•
rio e n 0
To accept/end acall:
Press the button.
To reject a call:
Press and hold the btton for 2 seconds.
To activate Voice Control:
When the Home Screen ofyour iPhone/iPod is
displayed, press and hold the button for
2
seconds. Say your voice command.
This function is not supported by all iPhone/iPod
models.
1

(E:
Manufacturer Declarations
Declaration of Conforrnit'l
Sennheiser Communications A/S gives a warranty
of 24 months on this product.
For the current warranty conditions, please visit
our website at www.senncom.com under If Service
&Support" or contact your Sennheiser partner.
Declaration o·f COnft1rmity
This product is in compliance with the
essential requirements and other rele-
vant provisions of directives:
EMC 2004/108/E~ RoHS 2002/95/EC
WEEE 2002/96/EC.
VV EEED (::' c ~ a rat jon
Please dispose of this product by taking
it to your local collection point or recyc-
ling center
for such equipment.
The declarations are available at www.senncom.com.
2

StaterTlents regarding FCC
and Industry Canada
FCC Declaration of Conformity (DoC)
~ SENNHEISER
~ Model No: MM70ilCX880i/HD218i/HD238i/PX100-lIi/PX200-lli/IE8i
We, Sennheiser Electronic Corporntion
Strat. Maf'1(eting •Stefanie Reichert
One Enterprise
Driw •Old Lyme·
CT 06371 •USA
Tel: [phone], ext. 144
Fax:
[phone]
declare the abo-.e de-.lce comply with the requirements of Federal Communications Commission.
This de\4ce complies with Part
15 of the FCC rules. Operation is subjected to the following two conditions:
1) This
de'o1ce may not cause harmful interference. and
2) This de"';ce
must accept any interference receiwd. including interference that may cause undesired operation.
Responsible Party: John Falcone
This device complies with Part 15 subpart b of the
FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause
harmful interference, and (2) this device must
accept any interference received, including inter-
ference that may cause undesired operation.
This
equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
3

are designed to provide reasonable protec- P!nI
tion against harmful interference in aresi- IiMII
dential installation. This equipment gener-
ates, uses and
can radiate radio frequency energy
and,
if not installed and used in accordance with
the instructions, may cause harmful interference
to radio communications. However, there is no
guarantee
that interference will not occur in a
particular installation.
If this equipment does
cause
harmful interference to radio or television
reception, which
can be determined by turning
the equipment off and on, the user is encouraged
to try to correct the interference by one or more
of the following measures:
•Reorient or relocate
the receiving antenna.
•Increase
the separation between the equip-
ment and receiver.
4

•Connect the equipment into an outlet on r!rft
acircuit differentfrom that to which the IiIiI
receiver is connected.
•Consult the dealer or
an experienced radio/TV
technician for help.
This class Bdigital apparatus complies with the
Canadian ICES-003.
Changes or modifications made to this equipment
not expressly approved by Sennheiser electronic
Corp. may void the FCC authorization to operate
this equipment.
5

In compliance with:
USA
FCC Part 15,
Fe
subpart b
Canada ICES-003
Europe
(E
)t
-
Australia /
ON340
New Zealand
China
e