Sennheiser MobileConnect User manual

Sennheiser electronic GmbH & Co. KG
Am Labor 1, 30900 Wedemark, Germany, www.sennheiser.com
Printed in Germany, Publ. 02/21, 583971/A02
MobileConnect Station
Quick Guide | Kurzanleitung | Guide de démarrage rapide | Guida rapida | Instrucciones resumidas |
Instruções resumidas | Beknopte gebruiksaanwijzing | Krótka instrukcja obsługi | Snabbguide | Kort vejledning |
Pikaohje | Γρήγορος οδηγός | Kısa Kılavuz | Краткая инструкция | 快速指南| 快速使用指南 | クイックガイド | 요약
설명서|
Operating elements
In the box
Troubleshooting and Reset
System Setup
Analog IN
Analog OUT
Contact and Support
Safety
Guide
Quick
Guide
MOBILECONNECT STATION
MOBILECONNECT STATION
A
Primary Secondary Ctrl PoE / Stream
Out 1
Out 2
In 1
In 2
B
https://192.168.0.10/
Primary Secondary Ctrl PoE / Stream
Out 1
Out 2
In 1
In 2
Primary Secondary Ctrl PoE / Stream
Out 1
Out 2
In 1
In 2
Primary Secondary Ctrl PoE / Stream
Out 1
Out 2
In 1
In 2
status LED
flashes green
< 1 sec ≥ 3 sec
reboot
reboot
press
the button
lights up
green
error/
warning
on
A
B
1. 2.
2
3
4
5
1
Digital audio
input/output
Ctrl socket
PoE/Stream socket
Analog audio output
2 XLR-3F sockets
Dante™-interface with two RJ-45 sockets,
Primary und Secondary
RJ-45 socket
For connection to separated control
network
RJ-45 socket
For connection to streaming network
2 XLR-3M sockets
Analog audio input
14 53
2
Back
Front
For further details see:
https://docs.sennheiser-connect.com
Configure the laptop with the static
IP address 192.168.0.2
Open your browser and
navigate to:
https://192.168.0.10
The default password is: Sennheiser
For installation and setup of MobileConnect go to:
https://docs.sennheiser-connect.com
*not included
XLR *
XLR *
*not included
XLR *
XLR *
Online:
www.sennheiser.com/mobileconnect
https://docs.sennheiser-connect.com
Direct contact:
[e-mail]
Software License:
www.sennheiser.com/mobileconnect

Dante
Specification
Rack mounting
Rack mounting
Dante™ DSP
LAN
LAN
LAN
Primary Secondary Ctrl PoE / Stream
Out 1
Out 2
In 1
In 2
LAN
Primary Secondary Ctrl PoE / Stream
Out 1
Out 2
In 1
In 2
Primary Secondary Ctrl PoE / Stream
Out 1
Out 2
In 1
In 2 Primary Secondary Ctrl PoE / Stream
Out 1
Out 2
In 1
In 2
LAN
Dante™ DSP
Sec Pri
Dante™ DSP
2.
3.
1.
*
*
Digital audio connection through
Dante™ network Digital audio connection through
redundant Dante™ networks
Switched mode
Variant 1: Variant 2:
Variant 3:
approx. 212 x 168 x 43 mm (8,4 x 6,6 x 1,7 ")
approx. 970 g
2x XLR-3F (input)
2x XLR-3M (output)
2x RJ-45 Dante™ Digital Audio (input/output)
1x RJ-45 Control/PoE/Streaming
1x RJ-45 Control
PoE IEEE 802.3af Class 3
Max. 10 W
40 Hz - 20 kHz
101 dB (A)
- 82 dB (A)
10 kΩ
without gain: 18 dBu
with gain: 3 dBu
4 dBu 600 Ω
8 dBu 200 kΩ
Product properties
Dimensions W x D x H
Weight
Audio inputs/outputs
Network / Control
Supply voltage
Power consumption
XLR connectors
Frequency response
Signal to noise ratio S/N
Total harmonic
distortion THD + N
Audio inputs
Input impedance
Max. input level
Audio outputs
Max. output level
Operation: 0 °C to +40 °C
32 °F to 104 °F
Storage: -10 °C to +60 ° C
14 °F to 140 °F
20 - 90 %, non condensing
Ambient conditions
Temperature range
Relative air humidity
Configuration via Audinate Dante Controller | www.audinate.com
*GA 3 rack mount set not included