Sense SNS t Series Instruction manual

Russian HDD Locating Systems
SNS
«t series»
Quick User`s Guide

Locating Menu
Locating menu
Contrast Backlight Color inversion Screen heating
(optional)
Language Angle (grades
or percentages)
Temperature
(C˚/ F˚)
Distance/Depth
measuring
Date and Time Change
location view
Uerwater
Antenna Main Menu
Transmitter settings
Power OFF
Receiver settings
System info
Main settings
Main Settings
To navigate To change To confirm

Transmitter Settings
Steps:
1. Choose icon , and confirm
2. Check the noise test graph
3. Choose the best frequency
4. Choose the power mode
5. Confirm settings
6. Choose sleep mode
7. Insert batteries to the transmitter
8. Close the cap
9. Put down the transmitter to correct
position
10. Confirm after you see «DONE»
CAUTION!!!
During 10 sec you have to:
Falling asleep:
Turn on the probe and bring
to the receiver within 10 seconds
Wait
NOT15m 7m

Calibration
Calibration Test
Calibration 3 / 10m

ClockFace
Quality
ofsignal
Receiver
battery
Horizontal
distance
Frequency Data
receiving
Telemetry
channel
Location field and
locating marker
Clock roll
position
Transmitter
temperature
Receiver
battery
Distance
tosurface
Depth
Predicted
depth
Depth
Angle
Frequency
Horizontal
distance
Main
Menu
Main
Menu
Switching
locating points
Switching
locating
points
Switching
locating points
Record to
DataLog
Record to
DataLog
Trigger
for depth
Trigger
fordepth
Collecting
Data
Transmitter
battery
Transmitter
battery
Quality of
signal
Transmitter
temperature
Power
ofsignal
Power of
signal
Angle
Clock roll
position
Cross in Box
0.1
2.00
L
h
12kHz
120
20C
-12.7%
4.29 9.03
4 ˚C

Remark: in frequency changing process
YOU HAVE TO set “24 o`clock” on the Receiver
Repeater
Switching frequencies
Steps Clock Waiting
time, sek
1 – preparation 10 15-30
2 – preparation 2 15-30
3 – preparation 7 15-30
4 – choose from 12 to 6 15-30
5 – confirm from 8 to 10 15
To navigate
Locating
menu
Power
OFF
Telemetry
channel
Main
settings
Transmitter
type S.f. helper
To change To confirm