Sensica SENSIMATCH User manual

User Guide

3
Table of Contents
What is sensiMatch™ 4
What to Expect When Using sensiMatch™ 4
sensiMatch™ Description 5
User Instructions 6
Preliminary Test 8
Recommended Treatment Protocols 9
When Shouldn’t sensiMatch™ Be Used? 12
Possible Side Effects 15
Cleaning and Troubleshooting 15
Frequently Asked Questions 17
Device Specification 18
© All rights reserved to Home Well Trading Ltd.

4
What is sensiMatch™
sensiMatch™ is a multi-platform home use
device offering pedicure, skin peeling, hair
buffing and massage treatments.
Each sensiMatch™ treatment has its own
selection of dedicated Adapt2U™ pads.
sensiMatch™ Adapt2U™ technology
sensiMatch™ is designed to perfectly
match all of your body's curves, using
its revolutionary Adapt2U™ patented
technology. Adapt2u™ delivers superior
efficiency in each treatment provided
by sensiMatch™.
Adapt2U™ technology is based on pad's
elasticity and air cavity beneath the pad
which allows the pad to adapt itself. The
snap-on pads allow you to choose your
treatment and enjoy smooth personalized,
visible results - effortlessly.
What to Expect When Using
sensiMatch™
• sensiMatch™ is equipped with a safety
mechanism that will stop it from working
when it is pressed too hard on the body.
• Slight sensations of warmth - during skin
peeling, hair removal and pedicure
treatments.
• Residue of dead skin cells in the treated
area - you may notice a thin white
layer during and just after use with the
sensiMatch™ abrasive pads.
PLEASE READ ALL INSTRUCTIONS
AND SAFETY PRECAUTIONS
CAREFULLY PRIOR TO USE
IF IN DOUBT, PLEASE ADVISE
A PHYSICIAN BEFORE USING
sensiMatch™

5
sensiMatch™ Description
sensiMatch™ kit includes:
1. sensiMatch™ device
2. External power supply
3. Adapt2U™ pads (each sensiMatch™ kit
comes with different set of pads)
4. Post-treatment Sensica lotion
(each sensiMatch™ kit comes with different
lotion per the selected treatment)
Main body description
sensiMatch™ Adapt2U™ pads menu
Hair-removal
pad
Massage
pad
Pedicure
pad
Skin peeling
pad
Device
electric power
socket
Speed
level
switch
sensiMatchTM pad
adaptor
1
2
3

6
User Instructions
Device set-up
PLEASE READ ALL INSTRUCTIONS
AND SAFETY PRECAUTIONS
CAREFULLY PRIOR TO USE
• Remove all components from the box
(sensiMatch™ device, power supply,
Adat2U™ pads and post-treatment lotion).
• Attach the required Adapt2U™ pad on the
sensiMatch ™ pad adaptor
(see image - item 3).
• Plug the power cord end to the electric
outlet.
• Only after plugging the power cord end
to the electric outlet, plug the other end
of the power cord to the device electric
power socket (see image - item 1).
sensiMatch™ is now ready for use!

7
How to use sensiMatch™
1. Select the most comfortable position
for treatment.
2. Make sure your skin is clean and dry.
3. Turn on the device using the switch
located on the inner side of the device
(see image - item 2). The device includes
two speed levels. Adjust the speed level
to your convenience.
4. Prior to your first treatment, you should
perform a preliminary test as instructed
in the following chapter!
5. Move the device continuously, gliding
from one area to the next. Not gliding the
device or holding it on a single spot may
lead to over-sensitivity of the skin and
may result in blisters.
6. sensiMatch™ is equipped with a safety
mechanism that will stop it from working
when the device is pressed too hard on your
body. You should apply the device gently
on your body, and add pressure as required
while gliding the device across the skin.
7. You may feel a slight warm sensation
during the treatments, or immediately
thereafter. This is perfectly normal.
8. Repeat and cover the treatment
area as instructed in the applicable
recommended treatment protocol.
9. Turn off the device and unplug it after
completing each treatment session.

8
Preliminary Test
1. Prior to your first treatment, test
sensiMatch™ to find your preferred
settings to achieve best results while
maintaining maximum safety and comfort.
2. Preliminary test should be performed on
a small and less exposed area of skin. The
test will help you to determine:
a. Optimal treatment duration: please
carefully read the specific Adapt2U™
pad recommended treatment protocol
in this User Guide for the recommended
treatment duration as applicable.
b. Speed level: always start with speed
level 1. Increase to speed level 2 only
once comfortable and according to the
recommended treatment protocol.
c. Adapt2U™ pad's coarseness: always
start with the more delicate Adapt2U™
pad. Change to a coarser pad only
once comfortable and according to the
recommended treatment protocol.
d. Allow 24 hours to ensure a positive
reaction (no reaction is also a positive
reaction).
Examine your skin's reaction
1. If your skin hurts or burns during or
after treatment, you are using the
device incorrectly and should check the
following before continuing treatment:
A. You may be over-treating the same
area - do another test on a different
area. This time treat the area for shorter
period of time and glide the device faster .
B. You may be pressing too strongly
against your skin - try taking some
pressure off.
C. You may be using speed level that is
too high for that area - try reducing the
speed level.
D. You may be using a pad that is too
coarse - try switching to a gentle pad.
2. If you are satisfied with the preliminary
test results - remember the settings and
apply them for the full treatment.

9
Recommended Treatment
Protocols
Pedicure treatment
• The pedicure pad, as displayed in the
picture, is designed to remove rough, dry
and callus skin from the feet and heels.
• Pedicure pads come with different
coarseness, allowing you to match the
right pad to your personal needs.
• Pedicure pad will wear out after 20
treatments on average. In order to ensure
effective treatment, make sure to replace
the pad after completing 20 treatments.
• Place the selected pedicure pad on the
device adaptor (see image - item 3).
•Remember to start with a preliminary test.
• Treatment should not take more than five
minutes, depending on your skin condition.
• On difficult spots where the skin is rough
and thick, you should treat the area using
the pad edges as indicated in the picture.
• sensiMatch™ provides visible results
from the first treatment. However, using
reducing tough skin may take more than
one treatment session.
• sensiMatch™ should be used again when
needed until the required results are
achieved.
• After completing the treatment, wipe or
wash the treated area.
• Apply Sensica’s post pedicure lotion to the
treated area.
Pad edge

10
Body skin peeling treatment
• The exfoliation pad, as displayed in
the picture, is designed for body skin
exfoliation, and to remove dead skin cells
and leave your skin radiant and smooth.
• The recommended treatment areas are the
legs and arms.
• Peeling pads come with different
coarseness, allowing you to match the
right pad to your personal needs.
• Peeling pad will wear out after 20
treatments on average. In order to ensure
effective treatment, make sure to replace
the pad after completing 20 treatments.
• Place the selected peeling pad on the
device adaptor (see image - item 3).
•Remember to start with a preliminary test.
• The selected area needs to be treated
for a few minutes by moving the device
continuously, depending on the skin
condition. Large body areas (for example
- legs) can take 3-7 minutes due to large
treatment area.
• sensiMatch™ provides visible results
from the first treatment. Skin peeling
pad should be used once in 10 days for
maintaining ongoing results.
• After completing the treatment, wipe or
wash the treated area.
• Apply Sensica’s post peeling lotion to the
treated area.
• Avoid direct sun exposure and hair
removal products after treatment for at
least one day. If treated skin is exposed
to sunlight within 2 weeks, make sure to
apply sunscreen of SPF 30 or higher.

11
Hair removal treatment
• The hair removal pad, as displayed in the
picture, is designed for buffing off body
hair and is ideal for treating ingrown hair.
• The recommended treatment areas are the
legs, arms and bikini line.
• Hair removal pads come with different
coarseness, allowing you to match the
right pad to your personal needs.
• Hair removal pad will wear out after 20
treatments on average. In order to ensure
effective treatment, make sure to replace
the pad after completing 20 treatments.
• Place the selected hair removal pad on the
device adaptor (see image - item 3).
•Remember to start with a preliminary test.
• Constantly move the device over the skin,
do not remain on the same spot for longer
than 2-3 seconds and make sure not to
come back to a treated area more than 3-4
times. It is important not to insist on
un-removed hair as it may impact the skin.
• It is very important to make sure not to
over treat your skin.
• sensiMatch™ provides visible results
from the first treatment. Hair removal
pad should be used once in 10 days for
maintaining ongoing results.
• After completing the treatment, wipe or
wash the treated area.
• Apply Sensica’s post treatment lotion to
the treated area.
• Avoid direct sun exposure and hair
removal products after treatment for at
least one day. If treated skin is exposed
to sunlight within 2 weeks, make sure to
apply sunscreen of SPF 30 or higher.

12
Massage treatment
• The massage pad, as displayed in the
picture, is designed to provide muscle
relaxation.
• The massage pad may be used on legs,
arms, back, neck, shoulders or any other
required area.
• Place the massage pad on the device
adaptor (see image - item 3).
• The selected area needs to be treated
for a few minutes by moving the device
continuously.
• sensiMatch™ with the massage pad should
be used again when needed.
• It is recommended to combine Sensica
cellulite reduction lotion after massage
treatment on applicable areas.
When Shouldn’t sensiMatch™
Be Used?
WARNINGS
• Do not open or repair this device as it
contains dangerous electrical components
that may cause physical damage.
• Do not use near bathtubs, showers, basins
or other vessels containing water as it may
lead to electrocution.
• Do not use the device if:
• The device is not working properly,
appears damaged or broken (UV and IR
emitted from this device)
• The cord or plug are damaged
• You see or smell smoke
• The outer shell is damaged or loose
• Lamp or Treatment Window is
damaged/missing
• Becomes damp or wet
• NEVER use flammable liquids such as alcohol
or acetone to clean the skin before using this
device as it may cause burning of the skin.
• Do not use this device if you have skin

13
cancer or on areas at risk of malignancy.
• Do not use this device if you suffer from
blood coagulopathy or excessive bleeding
or bruising.
• The safe use of this device by someone
using blood-thinning medication
(anticoagulants), including fish oil,
garlic supplements etc. has not been
established.
• Do not use this device if you have a history
of deep vein thrombosis in or around the
treatment area.
CONTRAINDICATIONS
THE CONSEQUENCES OF THE
FOLLOWING CONTRAINDICATIONS
ARE NOT YET ESTABLISHED AND
MAY CAUSE ADVERSE EFFECT
• Do not use if you have been taking drugs
that influence the immune system.
• Do not use if you have impaired immune
system (as HIV).
• Do not use on damaged or broken skin or if
you have a history of a Herpes or Psoriasis
outbreak in or around the treatment area.
• Do not use if you suffer from keloid scar
formation or impaired wound healing.
• Do not use if you suffer from extra dry or
sensitive skin.
• Do not use if you suffer from acne.
• Do not use if you suffer from metabolic
conditions, such as diabetes.
•Do not use on sunburns in the treatment
area as this can cause serious burns or
skin injury.
• Do not use if you have dark spots such
as large freckles, moles or blisters on the
treatment area.
•Do not use on the face, armpits, breasts
or scalp as it may cause serious skin injury.
• Do not use over piercing or any metal
items such as earrings or jewelry as it may
cause skin injury.
• Do not use on tattoos, permanent make
up and intimate body areas such as
nipples, genitalia or around the anus.
• Do not use if you have any permanent
implants in or around the treatment area

14
(including but not limited to: silicon or
injected chemical material, metal plates or
other metal material).
• Do not use if you had a chemical peel or
natural filler (such as hyaluronic acid) in
the treatment area.
• If you experience extreme redness of
the skin, blistering, or burns - stop using
immediately!
• Note: If you have undergone any other
aesthetic procedures or any uncertainty
regarding potential side effects, consult
your physician before using sensiMatch™.
CAUTIONS
•KEEP OUT OF CHILDREN’S REACH.
• This appliance is not intended for use by
persons with reduced physical, sensory or
mental capabilities.
• Use only with original external power supply.
• Do not use with any additional accessories that
are not part of its intended use as there is no
data supporting this kind of use of the device.
• Use according to the instructions for use only.
• Do not leave the device unattended when
plugged into an electrical outlet.
• Do not use Adapt2U™ pads for any treatment
other than its designated purpose.
• sensiMatch™ Adapt2U™ pads are designed
to be used by a single user. Sharing or
exchanging pads between users can transfer
skin diseases from one person to another.
• Before using sensiMatch™, make sure the
device is clean, dry and intact. Cleaning
instructions are detailed in the cleaning
section.

15
Possible Side Effects
When using sensiMatch™ according to these
User Guide, side effects are rare. However,
every esthetic procedure including the
usage of home use devices may cause some
degree of side effects:
Degree of side
effects
Side effects
Minor
side - effects
Local pain
Irritation
Redness
Sensitivity to touch
Rare
side - effects
Pigment changes
Excessive redness
Swelling
Extremely rare
side - effects
Bruising
Blisters
Cleaning and
Troubleshooting
Cleaning
• Make sure to turn off and unplug the
device before cleaning.
• Clean the device with a soft, damp cloth or
paper towel.
• It is recommended to clean Adapt2U™ pads
following each treatment session in order
to remove the remaining dead skin cells.
• After cleaning the pad, examine it to make
sure it is symmetrical and not overused.
• Adapt2U™ pads will wear out after 20
treatments on average. In order to ensure
effective treatment, make sure to replace the
pad after completing 20 treatments.
• sensiMatch™ Adapt2U™ pads are designed
to be used by a single user. Sharing or
exchanging pads between users can
transfer skin diseases from one person
to another.
• Keep the device and the pads dry; never
submerge the device, any of its parts or its
pads in water as it may lead to electrocution.

16
Troubleshooting
If you experience any problems while using
sensiMatch™, please refer to the below
information to try and resolve them:
• The device does not turn on:
Make sure that the power cord is plugged
properly into the electrical outlet.
• The device stops working during
treatment session:
Verify that the device is not pressed too
hard onto the body during treatment
session.
If you still have problems with your device,
please contact our customer service.
WARNING!
DO NOT TRY TO FIX OR REPAIR THE
DEVICE ON YOUR OWN AS IT CONTAINS
ELECTRIC COMPONENTS, WHICH MAY
CAUSE PHYSICAL DAMAGE.
DO NOT OPEN THE DEVICE ON
YOUR OWN AS IT CONTAINS
ELECTRIC COMPONENTS, WHICH
MAY CAUSE PHYSICAL DAMAGE.

17
Frequently Asked Questions
sensiMatch™ safe?
Yes. sensiMatch™ has been designed to
meet the safety standards for a home use
device, and has a built-in safety mechanism
that will stop it from working when it
is pressed too hard on the body. Using
sensiMatch™ according to the instructions
for use and user precautions ensures a
completely safe experience.
Does it hurt to use sensiMatch™?
No. Using sensiMatch™ should not be
involved with any uncomfortableness.
Treatment will create a warm sensation in
the treated area, resulting from the device’s
movement on the skin. It is important to
follow the applicable treatment protocol
explained in the user instruction, and to
constantly move the device over the skin,
without remaining on the same spot
during treatment.
Is long-term use of sensiMatch™
dangerous for my skin?
No. No side effects or damage from long-
term use has been reported.
How can I determine what
Adapt2U™ pad is right for me?
Easily. You should always start with the
gentle pad and test it on your body (see
“preliminary test” chapter) while switching
to a coarser pad if needed.
Can men use sensiMatch™?
Yes, sensiMatch™ is suitable for both men
and women. The beauty of sensiMatch™ is
the ability to personalize and select the right
treatment and pad’s coarseness according
to your needs.
Updated User Guide are available also
online at www.sensica.com

18
Device Specification
Parameters
Mechanical rotation: 1000[RPM] and 1500
[RPM]
Selectable speed level: 2 levels
External power supply:
Input:100-240 [VAC], 50-60 [Hz]
Output:12 [VDC], 1000 [mA]
Device size and weight: 260[g], 9.2[Oz]
135x90x106[mm], 5.3x3.5x4.2[in]
Storage instructions storage &
transport conditions
Temperature: -25 to 70 [⁰C] (-13 to 158 ⁰F)
Humidity: 10% to 90% RH at 55[⁰C], (131⁰F)
Operational conditions
Temperature: 10 to 40[⁰C] (50 to 104 ⁰F)
Humidity: 20% to 80% RH
Max operating altitude: 10,000 ft

19
VER-09APR14
Double insulation
Consult Instructions for use
Do not dispose
Please read all warnings and
safety precautions prior to use
Do not use the sensiMatch™
device on tanned skin or after
sun exposure
Keep dry. Do not let the device
become wet. Keep away from
bathtubs, showers, basins or
other vessels containing water
Tested to comply
with FCC standards
Labeling

Sensica International
Home Well Trading Ltd.
450 Bath Road
Longford, Heathrow, UB7 OE8, UK
Tel: [phone]
Fax: [phone]
suppor[email protected]
visit us: www.sensica.com