Sentryus ECO EID24-42B Series User manual

Copyright 2010-2012. All Rights Reserved. 4I-318 / I-319
www.sentryus.com R201201-V30
PACKAGE CONTENTS
•One (1) IR Dome Camera with power/video cable
•Three (3) Mounting Screws
•Three (3) Wall Anchors
•One (1) Manual
For any returns, please include all components listed above with original packaging in
Resalable Condition. Absolutely No Returns will be accepted if any component is
missing/damaged.
SPECIFICATIONS
Model (NTSC) EID24-42B EID24-42W
Model (PAL) EID24-42BP EID24-42WP
Base Color Black White
Image Sensor 1/4" Sony Super HAD CCD
DSP Sony
Total Pixels NSTC: 510(H)×492(V)
PAL: 500(H)×582(V)
NTSC: 510(H)×492(V)
PAL: 500(H)×582(V)
Video Output 1 Vp-p 75 Ω/ Y/C Separated
Resolution 420 TV Lines
Minimum
Illumination 1.0 Lux @ F2.0 (0 Lux @ IR on)
S/N Ratio More than 52dB
Electronic
Shutter Speed NTSC: 1/60~1/100,000sec
PAL: 1/50~1/100,000sec
NTSC: 1/60~1/100,000sec
PAL: 1/50~1/100,000sec
Synchronization Internal
IR LED 24pcs IR LED
IR Wavelength 850nm
IR LED Life 10,000 Hours
IR Working
Distance 35~50ft / 10~15m
Lens 3.6mm Lens
Power Supply 12V DC (+/- 10%)
Power
Consumption 240~280mA IR LED on
90~110mA IR LED off
Operation
Temperature -4°F ~ 104°F / -20°C ~ +40°C
Dimension 5.31(Ø) x 4.33(H) inches / 135(Ø) x 110(H) mm
Weight 12.35 ounces / 350g
* Specifications are subject to change without notice
Copyright 2010-2012. All Rights Reserved. R201201-V30
PAL version also available
EID24-42B
EID24-42W
USER MANUAL
24 IR Dome Color Camera
FEATURES
•1/4” Sony Super HAD CCD
•420 TV Lines
•3.6mm Lens
•24 IR LED
•IR distance up to 50ft / 15m**
•1.0 Lux @ F2.0 (0 Lux @ IR on)
•110mA IR LED off / 280mA IR LED on
•12V DC (+/- 10%)
** IR distance may vary depending on environment

Copyright 2010-2012. All Rights Reserved. 2I-318 / I-319
www.sentryus.com R201201-V30
Disposal of Old Electrical & Electronic Equipment (Applicable in the
European Union and other European countries with separate collection
systems).
This symbol on the product or on its packaging indicates that this product shall not be
treated as household waste. Instead it shall be handed over to the applicable collection
point for the recycling of electrical and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by inappropriate waste
handling of this product. The recycling of materials will help to conserve natural resources.
For more detailed information about recycling of this product, please contact your local city
office, your household waste disposal service or the shop where you purchased the
product.
CAUTION
1. Never point the camera toward the sun
Do not expose the lens directly to the sun or to strong light as this may damage the
pick-up device.
2. Handle this camera with care
Avoid any shock or bumping of the camera. Improper handling could damage the
camera.
3. Requires a proper operating environment
This camera is designed for indoor use. The allowable temperature range for
operation of this camera is between -4°F ~ 122°F / -20°C ~ 50°C.
Please read the Manual before attempting to use this product.
Specifications are subject to change without notice.
Copyright 2010-2012. All Rights Reserved. 3I-318 / I-319
www.sentryus.com R201201-V30
4. Clean the front face or lens
It is recommended that the surface be cleaned every 3~6 months. Cleaning should be
done by using a chamois, a very fine soft cloth, lens tissue, or cotton tipped applicator
and ethanol to carefully remove any fingerprint or dust.
5. Check the power source voltage
The power source voltage should be within the specified range. (Camera must meet
the specifications). Camera must be connected to a surge protector at all times.
6. Objects and liquid entry
Never push objects of any kind into this camera as this may touch dangerous voltage
points of short out parts that could result in a fire or electric shock. Never spill any kind
of liquid on the video product.
7. Servicing
Do not attempt to service this video product by yourself as opening or removing
covers may expose you to dangerous voltage or other hazards. Refer all service to
qualified servicing personnel.
8. Damage requiring service
Unplug this video product from the wall outlet and refer service to qualified servicing
personnel under the following conditions:
a. When the power supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the video product.
c. If the video product has been exposed to rain or water.
d. If the video product has been dropped or the cabinet has been damaged.
e. When the video product exhibits a distinct change in performance.
ADDITIONAL CAUTIONS:
•Make sure the power supply is 12V DC.
•Wrong cable connections will cause malfunction and/or damage the camera.
•Please avoid places where direct sunlight may shine on the camera, as the
CCD can be damaged.
•Please avoid places where there are frequent vibrations or shocks.
LIMITED WARRANTY
This product is covered under warranty for one year from the date of purchase. The
warranty will automatically be voided if any of the following occurs:
1. Camera sticker is removed
If the camera sticker is removed, we will not be able to confirm any information
regarding when and where the product was purchased. We have no other way to
verify the purchase record without the serial number on the camera sticker; therefore,
it should not be removed.
2. Camera is modified in any way
If the camera is scratched, damaged, or modified in a manner not described in this
manual, the warranty will be voided immediately. It is the customer’s responsibility to
keep the camera in good condition.
3. Video or power cable is cut
The video cable and the power cable should not be tampered with. Cutting or
modifying of the cables will result in termination of the warranty.