Sentryus ECO Series Quick start guide

Copyright © 2013. All Rights Reserved. 1D-248 / D-247
www.sentryus.com R201308-V27
EPDX-3600B Black Base
EPDX-3600W White Base
Operational Manual
600 TVL 3-AXIS Dome Camera
FEATURES
•600 TV Lines
•1/3” Sharp CCD
•3.6mm Board Lens
•0.1 Lux @ F1.2
•75mA
•12V DC
This camera employs a digital signal processor (DSP) chip-set for image control with an
integrated state circuitry which provides extremely long life and high reliability. This
camera offers excellent image quality with low lag and high burn resistance, and is not
subject to distortions from magnetic fields.
Specifications & contents within this manual are subject to change without notice.

Copyright © 2013. All Rights Reserved. 2D-248 / D-247
www.sentryus.com R201308-V27
Disposal of Old Electrical & Electronic Equipment (Applicable in the
European Union and other European countries with separate collection
systems).
This symbol on the product or on its packaging indicates that this product shall not be
treated as household waste. Instead it shall be handed over to the applicable collection
point for the recycling of electrical and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by inappropriate waste
handling of this product. The recycling of materials will help to conserve natural resources.
For more detailed information about recycling of this product, please contact your local city
office, your household waste disposal service or the shop where you purchased the
product.
CAUTION
1. Never point the camera toward the sun
Do not expose the lens directly to the sun or to strong light as this may damage
the pick-up device.
2. Handle this camera with care
Avoid any shock or bumping of the camera. Improper handling could damage
the camera.
3. Requires a proper operating environment
This camera is designed for indoor use. The allowable temperature range for
operation of this camera is between 14°F ~ 122°F / -10°C ~ 50°C.
4. Clean the front face or lens
It is recommended that the surface be cleaned every 3~6 months. Cleaning
should be done by using a chamois, a very fine soft cloth, lens tissue, or cotton
tipped applicator and ethanol to carefully remove any fingerprint or dust.
Please read the Manual before attempting to use this product.

Copyright © 2013. All Rights Reserved. 3D-248 / D-247
www.sentryus.com R201308-V27
5. Check the power source voltage
The power source voltage should be within the specified range. (Camera must
meet the specifications). Camera must be connected to a surge protector at all
times.
6. Objects and liquid entry
Never push objects of any kind into this camera as this may touch dangerous
voltage points of short out parts that could result in a fire or electric shock.
Never spill any kind of liquid on the video product.
7. Servicing
Do not attempt to service this video product by yourself as opening or
removing covers may expose you to dangerous voltage or other hazards.
Refer all service to qualified servicing personnel.
8. Damage requiring service
Unplug this video product from the wall outlet and refer service to qualified
servicing personnel under the following conditions:
a. When the power supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the video product.
c. If the video product has been exposed to rain or water.
d. If the video product has been dropped or the cabinet has been
damaged.
e. When the video product exhibits a distinct change in performance.
LIMITED WARRANTY
This product is covered under warranty for one (1) year from the date of purchase. The
warranty will automatically be voided if any of the following occurs:
1. Camera sticker is removed
If the camera sticker is removed, we will not be able to confirm any information
regarding when and where the product was purchased. We have no other way
to verify the purchase record without the serial number on the camera sticker;
therefore, it should not be removed.
2. Camera is modified in any way
If the camera is scratched, damaged, or modified in a manner not described in
this manual, the warranty will be voided immediately. It is the customer’s
responsibility to keep the camera in good condition.
3. Video or power cable is cut
The video cable and the power cable should not be tampered with. Cutting or
modifying of the cables will result in termination of the warranty.

Copyright © 2013. All Rights Reserved. 4D-248 / D-247
www.sentryus.com R201308-V27
PACKAGE CONTENTS
A. One (1) Dome Camera with power/video cable
B. Four (4) Mounting Screws
C. One (1) Manual
* For any returns, please include all components listed above with original packaging in Resalable
Condition. Absolutely No Returns will be accepted if any component is missing/damaged.
DIMENSIONS
INSTALLATION & OPERATION
1. Remove the dome cover from the mounting base by rotating the dome cover
clockwise.
2. Adjust the camera viewing angle by first tilting (2a) then rotating the camera
module (2b). Then turn the horizontal adjustment ring (2c) to correct the image
and achieve proper orientation. See illustration on page 5.
A. B. C.

Copyright © 2013. All Rights Reserved. 5D-248 / D-247
www.sentryus.com R201308-V27
3. Once the installation is complete, replace the dome cover over the camera and
tighten it by turning counterclockwise.
4. Connect the video output to the monitor or other video device through a 75 Ohms
type coaxial cable and the DC-Jack or DC-Terminator to the power source.
NOTE: Power adapter sold separately.

Copyright © 2013. All Rights Reserved. 6D-248 / D-247
www.sentryus.com R201308-V27
SPECIFICATIONS
Model (NTSC)
EPDX-3600B
EPDX-3600W
Model (PAL)
EPDX-3600BP
EPDX-3600WP
Mounting Base Color
Black
White
Image Sensor
1/3” Sharp CCD
Effective Picture Elements
NTSC: 768(H) x 494(V)
PAL: 752(H) x 582(V)
Resolution
600 TV Lines
Minimum Illumination
0.1 Lux / F1.2
S/N Ratio
More than 48dB
Auto Electronic Shutter
NTSC: 1/60sec ~ 1/100,000sec
PAL: 1/50sec ~ 1/100,000sec
Gamma Correction
0.45
Gain Control
Auto
White Balance
Auto
Synchronization
Internal
Video Output
1Vp-p / 75 Ohms
Lens
3.6mm Board Lens
Voltage Requirement
12V DC + 10%
Power Consumption
75mA max.
Operating Temperature
+14°F ~ +122°F / -10°C ~ +50°C.
Dimensions (Ø x H)
3.44 x 2.22 inches
87.5 x 56.5mm
Net Weight
0.43 lbs / 195g
* Specifications are subject to change without notice
OEM Product Item Code: D-248 / D-247
MADE IN TAIWAN