Sentryus ECO Series User manual

EIR35-870VF2
700TVL 35 IR
W ea therproof
Bullet Camera
USER MANUA L
FEATURES
1/3” Sony Super HAD CCD II
Sony Effio-E DSP
700 TV Lines
2.8mm~12mm Varifocal Lens
35 IR LED; IR distance 80ft / 25m
VariousAngle LED Combination - Uniform IR light distribution for optimum
viewing angle
2DNR
Photodiode Design for accurate IR LED trigger activation
Double Glass: Effectivelyreducing the internal reflection
Aluminum alloy housing design for better heat dissipation
12V DC / 110mA@ IR OFF ; 340mA@ IR ON
IP66 Rating
Copyright © 2013. All Rights Reserved.
I - 3 72
www.sentryus.com R201302-V26

2
Please read the Manual before attempting to use this product.
Specifications and appearance are subject to change without notice.
Disposal of Old Electrical & Electronic Equipment (Applicable in the European
Union and other European countries with separate collection systems).
This symbol on the product or on its packaging indicates that this product shall not be treated as
household waste. Instead it shall be handed over to the applicable collection point for the recycling
of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and human health, which could
otherwise be caused by inappropriate waste handling of this product. The recycling of materials will
help to conserve natural resources. For more detailed information about recycling of this product,
please contact your local city office, your household waste disposal service or the shop where you
purchased the product.
CAUTION
1. Never point the camera toward the sun
Do not expose the lens directly to the sun or to strong light as this may damage the pick-up
device.
2. Handle this camera with care
Avoid any shock or bumping of the camera. Improper handling could damage the camera.
3. Requires a proper operating environment
This camera is designed for indoor use. The allowable temperature range for operation of this
camera is between 14°F ~ 122°F / -10°C ~ 50°C.
4. Clean the front face or lens
It is recommended that the surface be cleaned every 3~6 months. Cleaning should be done by
using a chamois, a very fine soft cloth, lens tissue, or cotton tipped applicator and ethanol to
carefully remove any fingerprint or dust.
5. Check the power source voltage
The power source voltage should be within the specified range. (Camera must meet the
specifications). Camera must be connected to a surge protector at all times.
6. Objects and liquid entry
Never push objects of any kind into this camera as this may touch dangerous voltage points of
short out parts that could result in a fire or electric shock. Never spill any kind of liquid on the
video product.

3
7. Servicing
Do not attempt to service this video product by yourself as opening or removing covers may
expose you to dangerous voltage or other hazards. Refer all service to qualified servicing
personnel.
8. Damage requiring service
Unplug this video product from the wall outlet and refer service to qualified servicing personnel
under the following conditions:
a. When the power supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the video product.
c. If the video product has been exposed to rain or water.
d. If the video product has been dropped or the cabinet has been damaged.
e. When the video product exhibits a distinct change in performance.
LIMITED WARRANTY
This product is covered under warranty for one year from the date of purchase. The warranty will
automatically be voided if any of the following occurs:
1. Camera sticker is removed
If the camera sticker is removed, we will not be able to confirm any information regarding when
and where the product was purchased. We have no other way to verify the purchase record
without the serial number on the camera sticker; therefore, it should not be removed.
2. Camera is modified in anyway
If the camera is scratched, damaged, or modified in a manner not described in this manual, the
warranty will be voided immediately. It is the customer’s responsibility to keep the camera in
good condition.
3. Video or power cable is cut
The video cable and the power cable should not be tampered with. Cutting or modifying of the
cables will result in termination of the warranty.
LIST OF COMPONENTS
A. One (1) IR Bullet Camera with power/video cable and attached bracket&sunshield
B. One (1)Allen Wrench
C. Four (4) Mounting Screws
D. Four (4) Wall Anchors
E. One (1) User Manual
A. B. C.
D. E.
* For any returns, please include all components listed above with original packaging in
Resalable Condition. Absolutely No Returns will be accepted if any component is
missing/damaged.

DIMENSIONS
Unit: mm
Zoom: Far / Near
Adjustor KnobFocus Adjustor Knob
SPECIFICATION
Model (NTSC)
EIR35-870VF2
Model (PAL)
EIR35-870VF2P
Sensor
1/3” Sony Super HAD CCD II
DSP
Sony Effio-E
Total Pixels
NTSC: 1028(H) x 508(V) / PAL: 1028(H) x 596(V)
Effective Pixels
NTSC: 976(H) x 494(V) / PAL: 976(H) x 582(V)
Resolution
700 TV lines
Synchronizing System
Internal
Scanning System
2:1 Interlace
S/N Ratio
More than 48 dB(AGC OFF)
Electronic Shutter
Auto/1/60 (1/50) ~1/100,000 sec.
Min. Illumination
0.1 Lux / F1.4 (50IRE)
Video Output
1.0 Vp-p / 75 ohm composite
IR LED
35pcs IR
IR Distance
80ft / 25m
IR Trigger
3 Lux ± 3 Lux IR ON / OFF
Auto White Balance
1800°K~10500°K
Lens Type
2.8mm~12 mm Varifocal Lens
Power Source
12V DC ± 10% / 1A
Power Consumption
4W
Current
110mA @ IR OFF ; 340mA @ IR ON
IP Rating
IP66
Operating Temperature
14°F ~ 122°F / -10°C ~ 50°
Storage Temperature
-4°F ~ 158°F / -20°C ~ 70°C
Dimension
6.26(L) x 3.39(W) x 3.27(H) inches / 159(L) x 86(W) x 83(H) mm
with sunshield and without bracket
Weight
1.68 lbs / 0.76 kg
MADE IN TAIWAN *Specifications are subject to change without notice
Copyright © 2013. All Rights Reserved.
I - 372
www.sentryus.com 4R201302-V26