INSTALLING THE CABLE
1. Open the BioVault 2.0 as shown in figure A.
2. Locate the small notches at the top of the BioVault 2.0 and insert one
end of the security cable into one of the notches. Then wrap the other
end around a secure (non open ended) object and insert it into the other
notch as shown in figure B.
3. Close the BioVault 2.0 as shown in figure C.
NOTE: The security cable should be used to secure the BioVault 2.0 to a restricted area. It
can be used to secure the BioVault 2.0 to a desk, bed frame, table or any other fixed object
that the cable can be looped around. Please note that although the cable is manufactured
using high strength steel it is intended to discourage and prevent a walk by theft or
unauthorized removal. It is not a theft proof device. This cable could be cut and should
not be relied on as your sole source of security against theft or burglary removal.
BioVault 2.0 Cable Instructions