Serious readers Clear Sun ROAM Light User manual

To purchase spare batteries, request a brochure or purchase
any light in the Serious Family, please call or visit our website.
0800 028 1890 | [phone]
www.seriousreaders.com
Customer Service
Frequently Asked Questions
Can I use the ROAM Light™ while it is charging?
Yes, you can use the light while it is charging.
How will I know when the ROAM Light™ is fully
charged?
Once fully charged, the LED indicator on the rear of the light
body will change from red to green.
Can I replace the LEDs?
The LED panel is a sealed unit and cannot be replaced.
How long do the LEDs last?
The energy ecient LEDs are rated to last up to 40,000 hours.
Can I use the ROAM Light™ outside?
The ROAM Light™ is designed to only be used indoors.
Where can I buy replacement batteries for the
ROAM Light™?
Replacement batteries are available to purchase from us.
Please see the customer service details below.
We hope you will love your new ROAM Light™
Our eyes work best in balanced natural light. The ROAM
Light™ uses ClearSun® Technology to closely match daylight,
helping you see small print and colours in higher denition.
Lightweight and easy to move around, it projects a light
pattern that helps you read and work in comfort anywhere in
your home.
We believe that better light enriches our lives by improving
sight and well-being. I hope that you love the ROAM Light™.
Alex Pratt OBE
Founder
Congratulations
•Batteries contain harmful materials, and are classied
as hazardous waste. They must never be thrown away
with daily rubbish. They should be returned to the
manufacturer or your local recycling service for disposal.
Do not incinerate.
•Serious Readers® is WEEE registered and provides a
disposal service at Unit 15 – 16 Faraday Road, Aylesbury,
HP19 8RY.
Battery Disposal
Battery Replacement
•This light uses a lithium-ion battery. The battery
compartment is located on the rear of the light body.
•To replace the battery, use a Phillips screwdriver to
remove the screw that holds the battery compartment
door in place. Remove the old battery and install a
new one with “+” facing upwards. Replace the battery
compartment door ensuring that the screw is tightened.
Power: 5W LED
Lumens: 270
Colour Rendering: Up to 97%
LED Lifespan: Up to 40,000
hours
Height: 10.75” – 18.75”
(27 – 48cm)
Weight: 1.1lbs (500g)
Base Size: 2.6” x 3.6”
(6.5 x 9cm)
USB Charging Port: 1.0A
Input Power: 1.0A
Colour Temperature: 5,000K
Power Adaptor:
Input: 200-240V, 50/60 Hz.
0.25A Output: 5.0V DC
Battery:
Lithium
3.7V/3350mAh/12.395Wh
Specications
Using Your ROAM Light™
1. Remove the light from the packaging and place at on a
steady surface.
2. The power switch is a touch switch that controls both
on/o, and brightness settings.
•Touch once to turn the light on to the 1st brightness
setting (least bright).
•Touch a second time for the 2nd brightness setting
(mid-brightness).
•Touch a third time for the 3rd brightness setting
(brightest).
•Touch a fourth time to turn the light o.
3. To position the light, hold the light body steady and grasp
either the exible neck or light shade, depending on the
adjustment needed.
4. The LED panel might get hot after several hours of
continuous use. Turn the light o and wait until the light
shade is cool before handling.
5. Do not alter the power adaptor.
6. Indoor use only.
7. The light shade is a sealed unit and cannot be replaced.
Battery and Charging
1. Charge your ROAM Light™ before use – it is shipped
uncharged.
2. Connect the USB-C charging cable to the power adaptor,
and into the power connector located at the rear of the
light body.
3. Only use with the supplied power adaptor to avoid
damage or fire.
4. Charge the light using the included USB-C charging cable
or power adaptor. It will take approximately 9.5 hours
to charge. The LED indicator on the rear of the light will
change from red to green when the light is fully charged.
Once fully charged, the battery will last approximately 3.5
hours on full brightness.
5. It is safe to use your ROAM Light™ while it is charging.
•If the battery compartment does not close securely, stop
using the product.
•Avoid extreme temperatures.
•Use original or certied cables. If the external exible cable
or cord of this luminaire is damaged, it must be replaced
by the manufacturer in order to avoid a hazard.
•Do not alter the plug.
•Indoor use only.
•Do not expose to liquids.
•Avoid dropping.
•Do not disassemble.
•Keep new and used batteries away from children.
Product Safety
0800 028 1890
[phone]
www.seriousreaders.com
Serious Readers, Chapel of Light, Bierton,
Bucks, HP22 5DW, Great Britain
D
A
Y
L
I
G
H
T
W
A
V
E
L
E
N
G
T
H
T
E
C
H
N
O
L
O
G
Y
(
T
M
)
R
E
D
U
C
E
E
Y
E
S
T
R
A
I
N
W
A
R
R
A
N
T
Y
1
year
W
A
R
R
A
N
T
Y
H
A
N
D
M
A
D
E
I
N
G
R
E
A
T
B
R
I
T
A
I
N
W
A
R
R
A
N
T
Y
N
O
A
S
S
E
M
B
L
Y
N
E
E
D
E
D
D
E
S
I
G
N
E
D
I
N
G
R
E
A
T
B
R
I
T
A
I
N
D
E
S
I
G
N
E
D
I
N
G
R
E
A
T
B
R
I
T
A
I
N
H
A
N
D
M
A
D
E
I
N
G
R
E
A
T
B
R
I
T
A
I
N
W
A
R
R
A
N
T
Y
ROAM
Light™
Instructions
®
L
i
g
h
t
u
p
y
o
u
r
l
i
f
e
i
n
d
o
o
r
s
™
R
eaders
L
i
g
h
t
u
p
y
o
u
r
l
i
f
e
i
n
d
o
o
r
s
™
SR1220

Using Your ROAM Light™Using Your ROAM Light™
What’s in the box?
Directing the light beam
Hold the light body
steady and grasp either
the exible neck or light
shade to adjust position.
Do not force the light
shade outside allowable
adjustment range as this
may cause damage.
Horizontal
ex
Vertical
ex
Lightly touch the switch to change the light output settings:
ROAM Light™
Light body
Power switch
Light shade
Flexible neck
LED panel
USB-C
charging cable
90o
Touch once to turn
on to the 1st
brightness setting.
Touch a third time
for the 3rd
brightness setting.
Touch a second
time for the 2nd
brightness setting.
Touch a fourth
time to turn the
light o.
Changing the settings
The
ROAM Light™
35o 35o
LED
indicator
Power
connector
Battery
compartment
Power adaptor
ClearSun is a registered trademark of OttLite Technologies, Inc.
L
i
g
h
t
u
p
y
o
u
r
l
i
f
e
i
n
d
o
o
r
s
™
Readers
®
®
Changing the battery
This light uses a lithium-ion battery. The
battery compartment is located on the rear of
the light body.
To replace the battery, use a Phillips
screwdriver to remove the screw that holds
the battery compartment door in place.
Remove the old battery and install a new one
with “+” facing upwards. Replace the battery
compartment door ensuring that the screw
is tightened.
Charging the
ROAM Light™
Connect the USB-C charging cable to the
power adaptor and the light. Plug the power
adaptor into a standard household 100V –
240V power outlet. Charge using included
USB-C charging cable and power adaptor.