Serpent 411 Team Edition User manual

ADDITIONAL INSTRUCTION MANUAL

Congratulations with your Serpent 411 Team Edition racing car.
The Serpent Team Edition has the following changes compared to the Serpent 411
l RCM shock-absorbers, see manual on next pages
l Modied gear-differential with new gears, new shafts and modied cases. The assembly way remains the same as before.
Smoother diff action.
l Flex-type top-deck, which mounts same way as the regular one, allows more ex in the chassis for improved grip/handling.
l Ackermann v2 steeringplate, which allows Ackermann changes by putting more or less shims, start with 2mm shims.
Assembly is similar and easy.
l Carbon bre Lipo brackets to hold the battery better in place. Mount below the nylon battery-tape guiders, see in this manual.
l Longer rear anti-roll bar, which allows to use the 2nd mounting spot in front of rear arms. First assembly remains the same.
Remark: do NOT cut the anti-roll bar as shown in A41.
l Increased diameter body-posts for more stabilty
l Larger front foam bumper in new design, mounts same way as before.
Please use the following manual steps in addition to the regular manual.
We wish you a lot of pleasure assembling the 411-TE and afterwards racing it. Good luck.
 TeamSerpent

46
A
10.5mm
use some
Locktite
to x
the nut
remove the top
of the shock
close the top
of the shock
use some
oil during
assembly
use some
oil during
assembly 46B
46D 46E 46F
46A
46G 46H 46 I
2
1
assemble the top of the shock
this will press the membrame
into the shocktop
Fill the shock body
with the supplied
shock absorber oil.
Slowly move the
shockrod up and down
to let all airbubles
escape
assemble the spring and springcup
to complete the shock
front: orange
rear: yellow

23
24
A
A
M3x6
3x5x1
M3x8
26
A
3x5x1
M3x6
3x5x0.3

M3x15
M3x15
62
A

STEERING ASSEMBLY
110108
1310
401513
401408
401025
110108
1310
401401
1310
401512
10122
411206
401356
110122
110114
110409

Explodeded view RCM shocks
160110
160110
160109
160104
6442
160107
909405
160106
160111
160109
160105
110437
160111
110438
160102
160111
160111
160300 Spring white
160299 Spring green TC
160298 Spring black TC
160100 Shockset RCM on-road (2)
160297 Spring grey TC
160301 Spring yellow (std)
160303 Spring red
160305 Spring blue
160306 Spring purple
160310 Spring-set L23 (5x2)
160304 Spring pink
160302 Spring orange (std)
Serpent 411-TE extra parts-list
CHASSIS
401444 Chassis carbon 2.25mm
401495 Topdeck carbon 411 2mm ex
Optionals
401354 Chassis carbon 2.5mm
401374 Topdeck carbon 2mm
401431 Topdeck carbon 2.5mm
401563 Topdeck carbon 1.75mm
401432 Chassis carbon 2mm
SHOCK ABSORBERS
6442 O-ring adj.nut (10)
160100 Shockset RCM on-road short (2)
160102 Shock RCM shaft short (2)
160104 Shock RCM body alu (2)
160105 Shock RCM bottom (2)
160106 Shock RCM top nut (2)
160107 Shock RCM membrame (4)
160109 Shock RCM bushing machined (8)
160110 Shock RCM bottom O-ring (8)
160111 Shock RCM parts frame nylon short (14)
909405 Shock adj nut alu +o-ring (4)
Optionals
160108 Shock RCM bushings (8)
160115 Shock RCM shaft short TiN coated (2)
OTHER
401465 Steeringrack V2
401497 Antirollbar 1.4mm rear
401464 Battery mount carbon F/R
401526 Geardiff revision set V2
401532 Geardiff uni 1/10 EP

ww w.serpent.com - [e-mail]
All rights reserved. Changes may occur without prior notice.
Sheet internal part-number: #54222-2