Server 82433 User manual
For purchasing this Extended Valve Body replacement for
your Server Pump. Its captured-ball design ensures they
stay put and out of your drain trap.
SERVE PRODUCTS—SERVE BETTER
Thank You
KIT 82433
O-RING
82323
CAPTURED-BALL
VALVE BODY ASSEMBLY,
EXTENDED
82432
21" BRUSH
82526
Replacement Valve
Body Kit
Page 2
www.Server-Products.com
IMPORTANT
Clean, rinse, sanitize, and dry parts
daily or regularly to comply with local
sanitization requirements.
Refer to specic pump manual for
complete cleaning instructions.
REFER TO PUMP MANUAL
IMPORTANT VALVE BODY
AREAS TO CLEAN
WASH ALL PARTS
PROPERLY BEFORE USE.
Refer to specic pump manual
for complete instructions included
with your original pump model.
Manuals are also available at:
Page 3
over new o-ring on valve body.
Align tabs on cylinder with groove openings.
Slide widest section of cylinder ange under the
center locking groove.
Push down rmly on cylinder.
Rotate cylinder clockwise to fully lock into grooves
on valve body.
INSTALL CYLINDER
3
INSTALL DISCHARGE TUBE
1
Align the at sides on the bottom of discharge tube
with pair of tabs at top of valve body.
Push down rmly on discharge tube.
Rotate discharge tube clockwise to fully lock into
grooves on valve body.
NEW VALVE BODY INSTALLATION
INSTALL NEW O-RING
2
into valve body.
TIP: Before installing, add a small amount
of food equipment lubricant to the o-ring.
Lubricant was supplied with original
pump. It’s also available to order:
Part Number 40179
Page 4 Manual #EM_01553_RevA 032322
NEED HELP?
Please be prepared with your Model, P/N and
Series located on the lid or base of the unit.
Example:
Chat with us!
262.628.5600 | 800.558.8722
Server Products Inc.
3601 Pleasant Hill Road
Richfield, WI 53076 USA MODEL
XXXX
P/N
#####
SERIES
##X ##X
SERVER PRODUCTS
LIMITED WARRANTY
This Server product is backed by a two-year
limited warranty against defects in materials and
workmanship. See Server-Products.com for details.
GENERAL SERVICE,
REPAIR OR RETURNS
Before sending an item to Server Products, contact
Customer Care to request a Return Authorization
Number. The RA Number ensures proper processing
and a prompt turnaround. Repaired units are typically
shipped out within 48 hours of receipt.
Merchandise returned for credit will incur a 20%
restocking charge, must be less than 90 days old, and in
unused (new) condition. Electrical parts (thermostats,
heating elements, etc.) are not returnable.
Servicing Cord: Specic tools are required for safe and
proper power supply cord removal and installation.
Repairs should be done by an OEM representative or
qualied technician using a cord meeting code H05
RN-F requirements.
