SevenFriday M-SERIES User manual
M-SERIES
NFC AUTHENTICATION & REGISTRATION:
SEVENFRIDAY watches guarantee authenticity through scanning the integrated
NFC chip, which is readable by NFC enabled devices*.
Download the SEVENFRIDAY app, scan to ensure authenticity, create your
account and register as the ocial owner.
*The chip is completely passive, data exchange is activated and powered by the device
from close distance of 2-5mm. iPhones are not NFC enabled devices.
AUTOMATIC MOVEMENT
MIYOTA 8215 - MADE IN JAPAN
INSTRUCTION MANUAL
*Depending on the Version
WINDING THE MAINSPRING
SETTING THE TIME
SECONDS DISK
MINUTES DISK
HOURS DISK
DISPLAY
Automatic winding watch can also be hand winded by turning the crown clockwise in normal
position. Wind 15-20 times and it will start to move, after slightly shaking.
1. Pull the crown out to the 2nd Click - Time setting position.
2. Turn the crown to set hour and minute disk.
3. After the time has been set, push the crown back to the normal position.
HOUR- MINUTES
TIME READING AXIS
(FROM RIGHT TO LEFT)
SECONDS
READING AXIS
> All 3 disks rotate clockwise
TIME READING
DISK
HOURS:
MINUTES:
SECONDS:
HOURS:
MINUTES:
SECONDS:
DISPLAY (12h)
EXAMPLE 1EXAMPLE 2
All rights reserved to SEVENFRIDAY®, unless stated otherwise, this manual
is forbidden to be duplicated, published or modied for any purpose or reason.
This manual suits for next models
1
Table of contents
Other SevenFriday Watch manuals
