SevenFriday V-SERIES User manual
V-SERIES
NFC AUTHENTICATION & REGISTRATION:
SEVENFRIDAY watches guarantee authenticity through scanning the integrated
NFC chip, which is readable by NFC enabled devices*.
Download the SEVENFRIDAY app, scan to ensure authenticity, create your
account and register as the ocial owner.
*The chip is completely passive, data exchange is activated and powered by the device
from close distance of 2-5mm. iPhones are not NFC enabled devices.
INSTRUCTION MANUAL
AUTOMATIC MOVEMENT
MIYOTA 82S7- MADE IN JAPAN
DISPLAY
DAY / NIGHT
INDICATOR
MINUTES RING
HOURS ADDITIONER SYSTEM
FIXED SCALE & ADDITIONER DISK
MINUTES HAND
SECONDS ADDITIONER SYSTEM
FIXED SCALE & ADDITIONER DISK
WINDING THE MAINSPRING
SETTING THE TIME
.
WATCH WINDER
Automatic winding watches can also
be hand-wound by turning the crown
several times clockwise in the normal
position.
Counter Clockwise
650 to 950 turns per day.
1. Pull the crown out to the 1st Click position.
2. Turn the crown to set the hour, minute hands and Day & Night indicator.
3. After the time has been set, push the crown back to the normal position.
ADDITIONER DISK*
FIXED SCALE
*CLOCKWISE ROTATION
HOURS
ADDITIONER SYSTEM
HOW DOES
IT WORK?
ADDITIONER DISK +
FIXED SCALE = HOURS
MINUTES
RING
MINUTE HAND
MINUTE RING *CLOCKWISE ROTATION
DAY & NIGHT
INDICATOR
*DAY AND NIGHT DISK - CLOCKWISE ROTATION
SECONDS
ADDITIONER SYSTEM
*CLOCKWISE ROTATION
HOW DOES
IT WORK?
ADDITIONER DISK +
FIXED SCALE = SECONDS
FIXED SCALE
ADDITIONER DISK*
(Day & Night indicator in the night area) (Day & Night indicator in the day area)
EXAMPLE
1
EXAMPLE
2
FAST STRAP CHANGER
ATTENTION
TO AVOID DAMAGING THE SYSTEM, DO NOT USE SHARP
OR POINTY OBJECTS, USE A WATCH PUSHER TOOL FOR
CORRECTOR OR ANY SOFT POINTED OBJECTS.
Release the strap from the side slot.
REMOVING STRAP
Press to release.
ATTENTION
MAKE SURE YOU ARE PROPERLY AND SAFELY INSTALLED TO
PROCEED STRAP CHANGE (ON TOP OF A RIGID SURFACE).
Insert the Pin from the right to the left.
Engage the Pin in the slot.
Make sure it CLICKS and it is secure.
ASSEMBLING STRAP
Pull out the buckle from the strap. Pull out the pin buckle.
Pull out the spring bar.
REMOVING BUCKLE
Press to release.
ATTENTION
TO AVOID DAMAGING THE SYSTEM, DO NOT USE SHARP
OR POINTY OBJECTS, USE A WATCH PUSHER TOOL FOR
CORRECTOR OR ANY SOFT POINTED OBJECTS.
All rights reserved to SEVENFRIDAY®, unless stated otherwise, this manual
is forbidden to be duplicated, published or modied for any purpose or reason.
Table of contents
Other SevenFriday Watch manuals
