SEVROLL SEVROLLBOX SLIM 3D User manual

66
LW
NL : 270
300
350
400
450
500
550
[mm]
L = LW - 85 mm
L = LW - 100 mm
Glass front fitting Set
for internal drawer front
SEVROLLBOX SLIM 3D h= 90 mm
Glass front fitting Set
for internal drawer front
SEVROLLBOX SLIM 3D h= 178 mm
Glass front fitting Set
for internal drawer front
SEVROLLBOX SLIM 3D h= 213 mm
P
sz
4x25 4x25
Drawer SEVROLLBOX SLIM 3D
h = 90 mm / h = 178 mm / h = 213 mm
LR
114
4x25
196
48 mm
135 mm
170 mm
Hsz
H :
sz
(for h = 90)
(for h = 213)
(for h = 178)
1080
37 mm 37 mm
9 mm
202 232
SEVROLLBOX SLIM 3D
h = 90 mm
SEVROLLBOX SLIM 3D
h = 178 mm
SEVROLLBOX SLIM 3D
h = 213 mm
min. 110
106
min. 23.5
min. 35.5
min. 198
194
min. 23.5
min. 35.5
min. 233
229
min. 23.5
min. 35.5
Glass front fitting Set
for internal drawer front SEVROLLBOX SLIM 3D
Components:
Length: 270
300
350
400
450
500
550
[mm]
Front base profile for glass
internal drawer front SEVROLLBOX SLIM 3D
Screws for
"front base
profile for glass”
Screws for
"front base
profile for glass”
Screws for
"front base
profile for glass”
Cutting dimensions of profiles
LW – internal width of carcass
NL – nominal length of the drawer
Calculations for the back wall and base of the drawer
can be found in the instructions SEVROLLBOX SLIM 3D
Front base profile for glass
internal drawer front
Glass # 8 mm Edges should be
polished and chamfered!
Mounting dimensions
minimum carcass length: (NL + 3 mm) minimum carcass length: (NL + 12 mm)
Drawer with flush front Drawer with inset front
The front of the drawer sits level with the carcass edges
ATTENTION! To ensure that the drawers cover the high front applied,
the guides should be taken back by 9 mm (one hole in the guide)
into the carcass

Installing the glass drawer front for SEVROLLBOX SLIM 3D h = 90 mm, h = 178 mm, h = 213 mm
180°
1 2
34 5
Glass front fitting Set
for internal drawer front SEVROLLBOX SLIM 3D