RiverRidge 16-033 User manual

RiverRidge®Afton 3-Hook Coat Rack
2 Pack
ITEM #:16-033
ASSEMBLY INSTRUCTIONS
ADULT ASSEMBLY REQUIRED
WARNING
SEE FULL WARNING ON PAGE 2
This product requires assembly by an adult because of small parts. Care should be taken
in unpacking and assembling this item to keep small parts away from children. During assembly
children should be kept away from the product due to possible risk of injury.
Young children can be seriously injured or killed if furniture tips over.
Don’t use this item for a TV stand or place heavy objects on top of item.
Always use angle-braces or anchors to secure furniture to the wall.

THESE COAT RACKS WILL HOLD UP TO 5 POUNDS PER HOOK OR A TOTAL OF
15 POUNDS PER COAT RACK. DO NOT LOAD EACH HOOK WITH MORE THAN
5 POUNDS OR LOAD THE COAT RACK WITH MORE THAN 15 POUNDS TOTAL
WEIGHT. IF OVERLOADED THE COAT RACK MAY PULL AWAY FROM THE WALL
AND CAUSE SERIOUS INJURY OR DEATH.

1
Wall panel1PC
QTYNO DESCRIPTION
1
PARTS LIST

Keyhole Hanging Plate
Plastic Anchor
Coat Hook
Screw (3x12mm)
2PCS
2PCS
3PCS
10PCS
TOOLS NEEDED FOR ASSEMBLY: FLAT & PHILLIPS SCREWDRIVER (NOT INCLUDED)
THE USE OF A POWER SCREWDRIVER IS NOT RECOMMENDED FOR ASSEMBLY
DO NOT USE ITEM IF ANY PARTS ARE MISSING OR DAMAGED
A
B
C
D
EScrew (4x35mm)
Wall Mounting Paper Template
2PCS
1PC
PARTS LIST
NO PARTS QTY DESCRIPTION
To order replacement parts at no cost to you, email [email protected], call
1-(844)-223-5201 or order parts online at www.riverridgehome.com. Only valid in the United States.
If purchased outside of the United States, please contact retailer where purchased.

STEP 1
STEP 2
A
B
B
B
B
C
C
BBA
BB
A
BB
1
1
1. Attach 1 hook (A) to wall panel (1) by inserting 2 screws (B) through holes on hook (A), then
tighten to wall panel (1).
2. Repeat above step for another 2 hooks (A).
1. Attach 2 hanging plates (C) to wall panel (1) by inserting 4 screws (B) through holes on
hanging plates (C), then tighten to wall panel (1).

STEP 3
WALL
E
D
E
E
DRYWALL
WALL ANCHOR
WITH SCREW
SCREW
ONLY
DRYWALL
OPTION #2
OPTION #1
WOOD
STUD
D
IMPORTANT:
Keep assembly instructions for future reference.
ATTENTION ADULTS: Cabinet should be checked periodically for damage or loose
screws/parts. Take appropriate action necessary to correct hazards such as tightening
of screws and taking any damaged parts away from children.
CARE INSTRUCTIONS:
Wipe clean with a water dampened cloth. Wipe dry with clean cloth.
WARNING Please make sure your item is
secured to the wall, per assembly instructions.
Option #1: Securing to Drywall
1. Using wall mounting paper template to determine position, screw 2 plastic anchors (D) into drywall.
2. Insert 2 screws (E) into holes on plastic anchors (D) and tighten.
3. Hang wall panel on wall by inserting 2 screw heads (E) into holes on hanging plates (C), then slide
panel down to make sure wall panel is fixed firmly to wall.
Option #2: Securing to Drywall and Wood Stud
1. Using wall mounting paper template to determine position, insert 2 screws (E) through drywall and into
wood stud.
2. Hang wall panel on wall by inserting 2 screw heads (E) into holes on hanging plates (C), then slide
panel down to make sure wall panel is fixed firmly to wall.

Enjoy your new RiverRidge® Coat Racks!
To order replacement parts at no cost to you,email [email protected], call
1-(844)-223-5201 or order parts online at www.riverridgehome.com. Only valid in the United States.
If purchased outside of the United States, please contact retailer where purchased.
RiverRidge® is a registered trademark of Sourcing Solutions, Inc., Hudson, WI 54016
Thank you for purchasing this RiverRidge®Home item. We hope you
enjoy it and consider purchasing other RiverRidge®items.