Shadowspec SS-1 User manual

SS-1 Smart Controller
www.shadowspec.com/smart-baery
Funcon Buon/ Baery Status Light
Locking Hooks for mounng
LED Light / Charger Socket
Dual Funcon
Version - 003
What’s in the box?
SS-1 Smart ControllerSS-1 Smart Controller
Shadowspec Charger AdapterShadowspec Charger Adapter
AC Power LeadAC Power Lead
AU / EU / US AvailableAU / EU / US Available


Install Your Smart Controller
Operate your Light
The Shadowspec App

Important Things to Remember
Step 1: Slide the SS-1 Smart Controller inStep 1: Slide the SS-1 Smart Controller in Step 2: Plug the LED light into the SS-1Step 2: Plug the LED light into the SS-1
1. Slide the SS-1 onto the Main Spar of your umbrella at the LED light End
2. Plug the LED light Cable into SS-1
3. 
Shadowspec app on your smart device to control the SS-1 Smart Controller.



the Shadowspec App on your smartphone.
Buon funcon:
Push once Light on - 100% full power (brightness).
Push again Light on - 50% full power (brightness).
Push again Light (stand-by mode to accept Bluetooth commands).
Baery status light funcon:
Red Light on Unit Charging
Green Light on Unit Charged
 Baery requires charging
Download the Shadowspec App to
your smart device to get full control
over your SS-1 Smart Controller. Visit
our website for links or search for
Shadowspec on Google Play or the
App Store.
1. Only use the supplied Shadowspec Charger Adaptor to charge the

2. 
3. 
4. 
5. 
Shadowspec LED-Light
(Unity and Serenity Models)
Input Voltage: 9V DC
Power Consupon: 900mA
Socket Polarity:
Shadowspec Charger
Input Voltage: 100V-240V AC
Output Voltage: 24V @ 1000mA
Plug Polarity:



Tip: the default password for the
controller is 12345678

www.shadowspec.com/smart-baery

SS-1 Controller Care
FCC Statement
The LED Light won’t come
on:
Charge your baery using the provided Shadowspec Charger.
Please note that the SS-1 will shut down if the baery
discharges below a minimum threshold; this protects the
baery from permanent damage. Please charge the baery.
The Baery is charged but
Light is no longer working:
1. Check the baery plug is aached to the SS-1 Baery.
2. Hold the buon for 10 seconds to reset the SS-1 Baery.
Mobile Applicaon won’t
detect the device:
Unit is fully discharged and not in Stand-by mode.
• Please remember to charge your SS-1 Smart Controller before it is used.
• 
• 
• 
• Do not dispose o the SS-1 Controller via normal trash disposal. Please recycle responsibly.


(1) This device may not cause harmful interference.



user’s authority to operate the equipment.
NOTE: 






encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.


Consult the dealer or an experienced radio/TV technician for help.
FCC Radiaon Exposure Statement

equipment should be installed and operated with minimum distance 20cm between the radiator & your body.