Shakespeare Electronic Style 390 User manual

Shakespeare Electronic Products Group
U.S. Operations: 6111 Shakespeare Rd. · Columbia, SC 29223 · 803-227-1590 · Fax: [phone] · www.shakespeare-marine.com
U.K. Operations: Enterprise Way, Fleetwood, Lancashire, FY7 8RY, England · [phone] · Fax: [phone] · www.vtronix-antennas.com
Style 390
Thank you for purchasing a Shakespeare antenna product.
Customer comments are welcome. Before installing, please study the
diagram and check parts supplied against those listed.
IMPORTANT! Please read all instructions before installing.
The Style 390 is a 23’ (7 m), two-section SSB whip antenna with
conductors running full length. The antenna’s design supports power
up to 1 KW. Its chrome-plated brass ferrule has 1”-14 threads. Use a
Shakespeare Style 409-R or 410-R Mounting Kit (sold separately).
Tools required: Soldering iron (40-watt Min.), pocket knife,
wire cutters, resin core solder, Crescent wrench or 1/2” open-
end wrench.
Installation Instructions
Choose a mounting location that is as high as practical, as free as
possible from obstructions, and as far as possible from other antennas
and other strong sources of RF.
1a. You must apply Loctite 242 thread locking compound to the Tip
Section’s ferrule threads and the Base Section’s upper ferrule
threads before assembly to ensure that the Tip Section remains
securely tightened while in service.
1b. Place the lockwasher over the threads of the Tip Section’s ferrule
as shown. Thread the Tip section onto the Base Section’s upper
ferrule, and securely tighten.
2. Use a Shakespeare Style 409-R or Style 410-R Mounting Kit
(sold separately) to mount the antenna to a deck or bulkhead.
Instructions for installing the mounts are included with the
mounting kits.
3. SSB antennas and transceivers require adequate grounding
systems. Follow the radio manufacturer’s instructions for
connecting this antenna to your SSB radio system.
©1994, 2008 Shakespeare Co. · Form I-390: rev. 08/04/2012
Supplied Parts
1 Base section antenna
assembly
1 Tip section antenna
assembly
1 3/8” Lockwasher
1 Tube Loctite 242
thread locking
compound
35-90-1107-00
Lockwasher
Tip Section
Apply Loctite
242 to threads
3/8”-24 threads
Base Section
Termination
band
Shakespeare Co., LLC is a subsidiary of Jarden Corporation (NYSE: JAH)
WARNING: Installation of this product near
power lines is dangerous! Check for overhead
wires before installing.
Tech Tip: This
antenna will read
“shorted” from Point
A to Point B (see
diagram) when tested
with an ohm meter or
continuity tester.
Point A
Point B