THANKS!
Thanks for buy ng Snark. We work hard
every day to make except onal tun ng
products…because you work hard every day
and you need products that are dependable
and h ghly accurate. Thanks for your support!
POWER UP
We recommend us ng a 9-Volt adaptor to
power your Snark. However, f you plan to
power your Snark w th a 9-Volt battery,
please use the turn screw on the bottom
cover to access the battery compartment
and connect battery to the battery cl p and
re nstall the bottom cover.
If us ng 9 Volt adaptor, make sure t s a
“center negat ve” 9 Volt adaptor w th at least
100mA output and nsert nto e ther of the
DC 9 Volt jacks at the end of the pedal. If you
have a 9 Volt supply connected to one of
these jacks, you can use the other jack to
power another dev ce.
LET’S GET STARTED
Insert cable from nstrument nto the IN
jack at r ght s de of pedal. Use MUTE output
to connect pedal to your ampl f er. When you
are us ng the MUTE output jack, every t me
you step on the foot sw tch to engage the
tun ng funct on, the output from the pedal s
s lenced.
P tch Cal brat on. The tuner automat cally s
set to A440 p tch reference. If you want to
reset t, press the PITCH CAL button on the
end of the pedal, and qu ckly press e ther the
UP or DOWN button to adjust the p tch
upward or downward. If you select a p tch
other than A440, t w ll be d splayed on the
LCD whenever the foot sw tch s engaged
and the pedal s n the tun ng mode. If us ng
battery power, unplugg ng the cable from the
nput jack w ll reset the tuner to A440. If
us ng DC supply (or battery power) press
“PITCH CAL” to reset to A440.
When tun ng funct on s engaged and
cable s nserted nto IN jack, you w ll see a
LCD
Di play
Mute
Output
Jack Input
Jack
True
Bypa
Foot witch
Pitch
Calibration
OUT
9-Volt
IN
9-Volt
Down
Button
Up
Button
