Shark ION X30 User manual

IR100
IR100_QSG_REV_MP_180621
QUICK
START
GUIDE
Please make sure to read the enclosed Shark®Owner’s Guide prior to using your vacuum.
©2018 SharkNinja Operating LLC. SHARK is a registered trademark of SharkNinja Operating LLC.
SHARK ION and SMART RESPONSE are trademarks of SharkNinja Operating LLC.
VERSATILE CLEANING
Press the Wand Release
button on the top of the
wand to disconnect it from
the handheld vacuum.
Press the Power
button, then choose
your Surface setting
and your Suction
setting. Place your
foot gently on the
floor nozzle and tilt
the handle back.
Stand the vacuum upright.
Step on the Floor Nozzle
Release button and pull
the wand up to disconnect
it from the motorized
floor nozzle.
Attach desired cleaning accessory, then
choose your Suction setting.
Floor Nozzle
Release
OR
FLOOR ABOVE-FLOOR
NOTE: Brushroll will only engage
when the handle is tilted back.
Wand
Release
Wand Release
CONVENIENT STORAGE
Release the handvac
and hook onto wand
for convenient storage
in small spaces.
Wall Mount and
additional charging
options available at
sharkaccessories.com.
EMPTYING THE DUST CUP
1. To empty dust cup, first
remove the handvac from
the wand by pressing the
Wand Release button and
pulling up on the handvac.
2. Position dust cup over
a trash bin, then open
the bottom of the
dust cup by pressing
the Dust Cup Release
button on the side.
Wand
Release
Use this Quick Start Guide
to start using your new
vacuum’s great features.
For questions, visit us
online at sharkclean.com
Register your vacuum at
registeryourshark.com
IONTM X30
CORD-FREE ULTRA-LIGHT

ION
AHandheld Vacuum
BMotorized Floor Nozzle
CWand
DOnboard Storage Hook
E8˝ Crevice Tool
FION Power Pack
GION Power Pack Charger
WHAT’S INSIDE:
G
FE
D
SMART RESPONSE™ TECHNOLOGY
ION POWER PACK
In Use
Full
Charge
Mid
Charge
Low
Charge
Nearly
Empty
No
Charge
Charging
Low
Charge
Mid
Charge
Nearly
Full
Full
Charge
Press the Surface Settings button to switch floor types. Press the ION BOOST button
to intelligently switch between ION POWER AND ION BOOST.
Surface Settings Suction Settings
VERSATILE CHARGING
20
Sec
Easily Insert or Remove the ION Power Pack
To insert, slide the ION Power Pack into the slot in the back of
the hand vac.
To remove, pinch the release tab then slide out the ION Power Pack.
OUT OF THE VACUUMIN THE VACUUM
NOTE: ION Power Pack
comes with a partial charge.
Fully charge prior to first
use and then completely
discharge to condition
the pack.NOTE: Full charge takes approximately 3.5 hours.
Battery Indicator
Lights
IN AVAILABLE
CHARGING DOCK
A
B
C
ASSEM B LY
2
(Click)
3
(Click)
1
(Click)
For complete maintenance instructions, see the enclosed Owner's Guide.
For additional parts and accessories, visit sharkaccessories.com.
For additional batteries and charging accessories, visit sharkclean.com/batteries.
CARPET
For carpets.
FLOOR
For bare floors and
small area rugs.
Power Button
NOTE: For deep cleaning per ASTM F 608 (embedded dirt in carpets) please select CARPET and ION BOOST settings.
NOTE: Select Carpet setting for stuck-on dirt and debris.
ION POWER
For everyday cleaning.
ION BOOST
Press for a timed
1-minute boost of
increased suction for
high-trac areas and
heavy messes. Press and
hold for manual control
of ION Boost for as long
as you need it.