Shark LIFT-AWAY ZU782 User manual

Please be sure to read the enclosed Shark® Owner’s Guide prior to using your unit.
ASSEMB LY
AVacuum Pod
BMotorized Floor Nozzle
CHandle & Hose
DExtension Wand
E12" Crevice Tool
FUpholstery Tool
GPet Power Brush
WHAT’S INSIDE TWO WAYS TO CLEAN
QUICK START GUIDE
A
C
D
E
F
G
(Click)
(Click)
(Click)
(Click)
B
NOTE: For proper operation, ensure all parts
are firmly CLICKED into place.
UPRIGHT
Power/Surface switch
Press switch to select
surface setting or to turn
o power. To engage
brushroll, step on floor
nozzle and tilt handle back.
Suction Control
Slide to MIN to increase
maneuverability on carpets.
Slide to MAX for more
suction on bare floors.
Attach accessories
to handle or wand.
LIFT-AWAY®
Lift-Away
Release
Handle
Release
Press release buttons to
lift pod o nozzle, or to
release handle or wand.
Wand
Release
LIFT-AWAY
®
UPRIGHT VACUUM

For questions or to register your product, visit us online at sharkclean.com
ZU782_QSG_MP_Mv1
TIPS EMPTYING THE DUST CUP
For quick cord access,
rotate upper hook down
and remove cord.
Move cord hook to
upright position to
secure cord in place.
To store your vacuum,
wrap cord around upper
and lower hooks.
Empty the dust cup after each use.
MAINTENANCE:
Rinse pre-motor filters every 3
months, and HEPA filter once a
year. Rinse with water only, and
allow to air-dry completely
before reinstalling.
See enclosed Owner’s Guide for
more information on how to clean
and replace the filters.
CHECKING FOR BLOCKAGES
If any hair is wrapped around brushroll, extending cleaning time will help it clear.
Zero-M® Self-Cleaning Brushroll
The Shark Zero-M self-cleaning brushroll delivers nonstop hair removal. Check for blockages or objects
stuck in the brushroll.
©2019 SharkNinja Operating LLC.
clean
Detach hose from vacuum pod, and check hose and opening on back of pod for blockages.
Detach wand from floor nozzle and handle, and check both ends for blockages.
Detach wand from floor nozzle, tilt nozzle neck back, and check opening for blockages.