Shark MATRIX RV2300 Series User manual

QUICK START GUIDE
2300 Series
Robot Setup:
4Scan the QR code to download the SharkClean® app.
2Attach Side Brush
• Note: Side brush design may vary.
1Set Up Dock
• Remove any plastic wrap and foam from the
robot and base.
• Place dock in a spot with a strong Wi-Fi signal.
• Dock LED will turn green when powered ON.
• Note: Check between the bumper and wheels to
ensure all protective materials are removed prior
to robot use.
3Place Robot on Dock
• Robot will turn on when properly placed on dock.
• Dock LED will turn blue when the robot is charging.
Side Brush
App Features
✔Matrix Cleaning
✔Mapping
✔Scheduling
✔No-Go Zones
• Complete your robot setup process in the app.
Turn Page
SELF-EMPTY ROBOT
ROBOT
™

What’s Included:
Robot
Robot Dock
Shark Matrix™ robot
Charging dock for robot.
1. Visit the app or sharkclean.com/support
• Owner’s Guide • Troubleshooting
• How-To Videos • FAQs
• Tips & Tricks
2. For additional help, please scan the QR code
to visit the digital Instruction Booklet or call
1-888-228-5531 for robot support.
Two Easy Steps If You’re Stuck: Maximize your Robot Experience:
© 2023 SharkNinja Operating LLC. SHARK and SHARKCLEAN are registered trademarks of SharkNinja Operating LLC.
SHARK MATRIX is a trademark of SharkNinja Operating LLC. APPLE and the Apple logo are trademarks of Apple Inc., registered
in the U.S. and other countries. APP STORE is a service mark of Apple Inc., registered in the U.S. and other countries. GOOGLE,
GOOGLE ASSISTANT, GOOGLE PLAY, the Google Play logo, and Android are trademarks of GOOGLE LLC.
Tips and tricks for getting the most out of your robot:
• To manually turn ON/OFF your robot, hold down the
DOCK button for 5–7 seconds.
• Clear the area of cords and wires before each clean.
• Always place your robot on a level surface when
performing maintenance.
• Clean brushroll, charging contacts, and filter regularly.
Side Brush
Moves debris into robot’s path.